Mailinglist Archive: opensuse-bugs (4376 mails)

[bugzilla_noreply@xxxxxxxxxx]

https://bugzilla.novell.com/show_bug.cgi?id=691280

https://bugzilla.novell.com/show_bug.cgi?id=691280#c3


Hernan Grecco <hernan.grecco@xxxxxxxxx> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
             Status|NEEDINFO                    |NEW
       InfoProvider|hernan.grecco@xxxxxxxxx     |

--- Comment #3 from Hernan Grecco <hernan.grecco@xxxxxxxxx> 2011-05-02 19:11:12 
UTC ---
When I plug the drive, I get the following in /var/log/message

May  2 20:23:27 tecra kernel: [ 2238.552083] usb 1-5: new high speed USB device
using ehci_hcd and address 3
May  2 20:23:27 tecra kernel: [ 2238.709098] usb 1-5: New USB device found,
idVendor=152d, idProduct=2329
May  2 20:23:27 tecra kernel: [ 2238.709107] usb 1-5: New USB device strings:
Mfr=1, Product=2, SerialNumber=5
May  2 20:23:27 tecra kernel: [ 2238.709113] usb 1-5: Product: USB to ATA/ATAPI
Bridge
May  2 20:23:27 tecra kernel: [ 2238.709118] usb 1-5: Manufacturer: JMicron
May  2 20:23:27 tecra kernel: [ 2238.709123] usb 1-5: SerialNumber:
9297294FFFFF
May  2 20:23:27 tecra mtp-probe: checking bus 1, device 3:
"/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5"
May  2 20:23:27 tecra mtp-probe: bus: 1, device: 3 was not an MTP device
May  2 20:23:27 tecra kernel: [ 2238.879866] usbcore: registered new interface
driver uas
May  2 20:23:27 tecra kernel: [ 2238.897965] Initializing USB Mass Storage
driver...
May  2 20:23:27 tecra kernel: [ 2238.898114] usb-storage 1-5:1.0: Quirks match
for vid 152d pid 2329: 8020
May  2 20:23:27 tecra kernel: [ 2238.898143] scsi2 : usb-storage 1-5:1.0
May  2 20:23:27 tecra kernel: [ 2238.898293] usbcore: registered new interface
driver usb-storage
May  2 20:23:27 tecra kernel: [ 2238.898296] USB Mass Storage support
registered.
May  2 20:23:28 tecra kernel: [ 2239.897199] scsi 2:0:0:0: Direct-Access    
FUJITSU  MJA2500BH G2          PQ: 0 ANSI: 2 CCS
May  2 20:23:28 tecra kernel: [ 2239.897790] sd 2:0:0:0: Attached scsi generic
sg2 type 0
May  2 20:23:28 tecra kernel: [ 2239.898748] sd 2:0:0:0: [sdb] 976773168
512-byte logical blocks: (500 GB/465 GiB)
May  2 20:23:28 tecra kernel: [ 2239.900350] sd 2:0:0:0: [sdb] Write Protect is
off
May  2 20:23:28 tecra kernel: [ 2239.900359] sd 2:0:0:0: [sdb] Mode Sense: 34
00 00 00
May  2 20:23:28 tecra kernel: [ 2239.901605] sd 2:0:0:0: [sdb] Write cache:
disabled, read cache: enabled, doesn't support DPO or FUA
May  2 20:23:28 tecra kernel: [ 2239.949705]  sdb: sdb1
May  2 20:23:28 tecra kernel: [ 2239.953735] sd 2:0:0:0: [sdb] Attached SCSI
disk

and it fails as described above. However, when I run:
$ sudo /bin/mount /dev/sdb1 /media/LGblack500 -o users,umask=000
I get
May  2 20:23:40 tecra ntfs-3g[5792]: Version 2010.10.2 integrated FUSE 27
May  2 20:23:40 tecra ntfs-3g[5792]: Mounted /dev/sdb1 (Read-Write, label
"LGblack500", NTFS 3.1)
May  2 20:23:40 tecra ntfs-3g[5792]: Cmdline options:
rw,noexec,nosuid,nodev,umask=000
May  2 20:23:40 tecra ntfs-3g[5792]: Mount options:
rw,noexec,nosuid,nodev,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096,default_permissions
May  2 20:23:40 tecra ntfs-3g[5792]: Global ownership and permissions enforced,
configuration type 1

and everything is fine.

-- 
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.