https://bugzilla.novell.com/show_bug.cgi?id=666883 https://bugzilla.novell.com/show_bug.cgi?id=666883#c0 Summary: yast2 partitioner does not open crypted LVM partitions Classification: openSUSE Product: openSUSE 11.3 Version: Final Platform: x86-64 OS/Version: Linux Status: NEW Severity: Normal Priority: P5 - None Component: YaST2 AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: ohering@novell.com QAContact: jsrain@novell.com Found By: Outsourced Testing Blocker: --- Since a while yast can create encrypted LVM partitions during installation and assign mount points to the individual logical volumes. However, it does not offer a way to peek into such an encrypted LVM partition to eventually assign a mount point to a logical volume if the partition was not part of /etc/crypttab during booting. In my case there is such a encrypted LVM partition on sda6 (used by the installed 11.3), and there is 11.4m5 on sda4: Model: ATA ST9750420AS (scsi) Disk /dev/sda: 699GiB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 0.00GiB 42.0GiB 42.0GiB primary ntfs type=07 2 42.0GiB 42.5GiB 0.50GiB primary ext2 boot, type=83 3 42.5GiB 690GiB 648GiB extended type=05 5 42.5GiB 170GiB 127GiB logical lvm, type=8e 6 170GiB 670GiB 500GiB logical lvm, type=8e 4 690GiB 699GiB 8.64GiB primary ext4 type=83 If I boot into 11.4m5 on sda4, yast shows sda6 as encrypted LVM but does not seem to offer to open it and look whats inside. The same happens with an eSATA drive sdb, were sdb6 is encrypted LVM. yast partitioner from 11.3 does not offer a way to open sdb6 and look at the LVM volumes and eventually mount logical volumes on the external drive. Model: ATA Hitachi HTS72505 (scsi) Disk /dev/sdb: 466GiB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 0.00GiB 0.49GiB 0.49GiB primary ext3 boot, type=83 2 0.49GiB 450GiB 450GiB extended lba, type=0f 5 0.49GiB 8.49GiB 8.00GiB logical linux-swap(v1) type=82 6 8.49GiB 450GiB 442GiB logical lvm, type=8e 3 450GiB 458GiB 8.00GiB primary ext3 type=83 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.