https://bugzilla.novell.com/show_bug.cgi?id=658663 https://bugzilla.novell.com/show_bug.cgi?id=658663#c0 Summary: Base:System/smartmontools: Bug: Freeze with Intel X18-M/X25-M/X25-V G2 SSDs Classification: openSUSE Product: openSUSE.org Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.3 Status: NEW Severity: Major Priority: P5 - None Component: 3rd party software AssignedTo: sbrabec@novell.com ReportedBy: martin@oneiros.de QAContact: opensuse-communityscreening@forge.provo.novell.com Found By: --- Blocker: --- I just had an INTEL SSDSA2M080G2GN freeze up after an "smartctl -a /dev/sda": ----------------- Dec 9 23:55:57 dream sudo: ms : TTY=pts/11 ; PWD=/etc ; USER=root ; COMMAND=/usr/sbin/smartctl -a /dev/sda Dec 9 23:56:18 dream kernel: [18038.930588] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Dec 9 23:56:18 dream kernel: [18038.930597] ata1.00: failed command: SMART Dec 9 23:56:18 dream kernel: [18038.930606] ata1.00: cmd b0/d5:01:06:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in Dec 9 23:56:18 dream kernel: [18038.930608] res 40/00:04:80:cd:b3/00:00:05:00:00/40 Emask 0x4 (timeout) Dec 9 23:56:18 dream kernel: [18038.930613] ata1.00: status: { DRDY } Dec 9 23:56:18 dream kernel: [18038.930619] ata1: hard resetting link Dec 9 23:56:18 dream kernel: [18039.234710] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 9 23:56:18 dream kernel: [18039.235427] ata1.00: configured for UDMA/133 Dec 9 23:56:18 dream kernel: [18039.235446] ata1: EH complete Dec 9 23:56:38 dream kernel: [18059.892334] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Dec 9 23:56:38 dream kernel: [18059.892341] ata1.00: failed command: SMART Dec 9 23:56:38 dream kernel: [18059.892350] ata1.00: cmd b0/d5:01:09:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in Dec 9 23:56:38 dream kernel: [18059.892352] res 40/00:04:80:cd:b3/00:00:05:00:00/40 Emask 0x4 (timeout) Dec 9 23:56:38 dream kernel: [18059.892357] ata1.00: status: { DRDY } Dec 9 23:56:38 dream kernel: [18059.892363] ata1: hard resetting link Dec 9 23:56:39 dream kernel: [18060.196645] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 9 23:56:39 dream kernel: [18060.197318] ata1.00: configured for UDMA/133 Dec 9 23:56:39 dream kernel: [18060.197339] ata1: EH complete -----------------
sudo /usr/sbin/smartctl -a /dev/sda Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION === Model Family: Intel X18-M/X25-M/X25-V G2 SSDs Device Model: INTEL SSDSA2M080G2GN Serial Number: CVPO017402JP080JGN Firmware Version: 2CV102HD User Capacity: 80.026.361.856 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1 Local Time is: Thu Dec 9 23:55:57 2010 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1) seconds. Offline data collection capabilities: (0x75) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0020 100 100 000 Old_age Offline - 0 4 Start_Stop_Count 0x0030 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 163 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 67 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 6 225 Host_Writes_32MiB 0x0030 200 200 000 Old_age Offline - 5330 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 7397 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 0 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 3651502743 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 099 099 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 099 Pre-fail Always - 0 SMART Error Log Version: 1 No Errors Logged Error SMART Error Self-Test Log Read failed: Eingabe-/Ausgabefehler Smartctl: SMART Self Test Log Read Failed Error SMART Read Selective Self-Test Log failed: Eingabe-/Ausgabefehler Smartctl: SMART Selective Self Test Log Read Failed -----------------
rpm -qi smartmontools Name : smartmontools Relocations: (not relocatable) Version : 5.40 Vendor: obs://build.opensuse.org/Base Release : 20.1 Build Date: Fr 22 Okt 2010 20:45:52 CEST Install Date: So 28 Nov 2010 19:16:13 CET Build Host: build37 Group : Hardware/Other Source RPM: smartmontools-5.40-20.1.src.rpm Size : 1299964 License: GPLv2+ Signature : DSA/SHA1, Fr 22 Okt 2010 20:46:10 CEST, Key ID cc6060f35d053b4f URL : http://smartmontools.sourceforge.net/ Summary : Monitor for S.M.A.R.T. Disks and Devices Description : SMARTmontools controls and monitors storage devices using the Self-Monitoring, Analysis, and Reporting Technology System (S.M.A.R.T.) built into ATA, SATA and SCSI Hard Drives. This is used to check the hard drive reliability and to predict drive failures. The suite contains two utilities. The first, smartctl, is a command line utility designed to perform simple S.M.A.R.T. tasks. The second, smartd, is a daemon that periodically monitors the smart status and reports errors to syslog. The package is compatible with the ATA/ATAPI-3 to -7 specification. The package is intended to incorporate as much "vendor specific" and "reserved" information as possible about disk drives. The commands man smartctl and man smartd will provide more information.
Authors: -------- Bruce Allen <smartmontools-support@lists.sourceforge.net> Distribution: Base:System / openSUSE_11.3 ----------------- This seems to be a common problem with Intel SSDs: https://bugs.launchpad.net/ubuntu/+source/smartmontools/+bug/597518 http://sourceforge.net/apps/trac/smartmontools/browser/tags/RELEASE_5_40/sma... http://forums.gentoo.org/viewtopic-p-6496792.html?sid=868568d3e5153dabe659c0... http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=560701 Should I report this upstream? -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.