https://bugzilla.novell.com/show_bug.cgi?id=641558
https://bugzilla.novell.com/show_bug.cgi?id=641558#c15
--- Comment #15 from Vadim Plessky 2010-10-17 17:37:53 UTC ---
checked with nm-tool.
Signal strength is 100 for ar9170usd adapter, and for rt2500pci sinal is 100 as
well.
# nm-tool
NetworkManager Tool
State: connected
- Device: eth0
-----------------------------------------------------------------
Type: Wired
Driver: r8169
State: unavailable
Default: no
HW Address: 00:16:17:51:9A:1D
Capabilities:
Carrier Detect: yes
Speed: 10 Mb/s
Wired Properties
Carrier: off
- Device: wlan1 [Auto TP-L]
---------------------------------------------------
Type: 802.11 WiFi
Driver: ar9170usb
State: connected
Default: yes
HW Address: D8:5D:4C:8D:4B:72
Capabilities:
Speed: 1 Mb/s
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points (* = current AP)
TRENDnet: Infra, 00:14:D1:57:F8:11, Freq 2412 MHz, Rate 54 Mb/s,
Strength 55 WPA
*TP-L: Infra, D8:5D:4C:BF:25:B4, Freq 2427 MHz, Rate 54 Mb/s,
Strength 100 WPA
TP-L: Infra, 94:0C:6D:E9:43:2F, Freq 2427 MHz, Rate 54 Mb/s,
Strength 78 WPA
ZXDSL531BII-66852E: Infra, 00:16:E3:66:85:2E, Freq 2462 MHz, Rate 54 Mb/s,
Strength 45
pantherx: Infra, 00:1C:C5:D8:34:8C, Freq 2462 MHz, Rate 54 Mb/s,
Strength 82 WEP
dlink: Infra, 00:26:5A:32:B7:39, Freq 2437 MHz, Rate 54 Mb/s,
Strength 84 WPA
IPv4 Settings:
Address: 192.168.1.202
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.2
DNS: 192.168.1.2
- Device: wlan0
----------------------------------------------------------------
Type: 802.11 WiFi
Driver: rt2500pci
State: disconnected
Default: no
HW Address: 00:13:D3:84:FE:9D
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
pantherx: Infra, 00:1C:C5:D8:34:8C, Freq 2462 MHz, Rate 54 Mb/s,
Strength 42 WEP
dlink: Infra, 00:26:5A:32:B7:39, Freq 2437 MHz, Rate 54 Mb/s,
Strength 45 WPA
TP-L: Infra, D8:5D:4C:BF:25:B4, Freq 2427 MHz, Rate 54 Mb/s,
Strength 100 WPA
TP-L: Infra, 94:0C:6D:E9:43:2F, Freq 2427 MHz, Rate 54 Mb/s,
Strength 62 WPA
P.S. I have second AP connected via WDS to 1st one, that's why there are two
"TP-L" SSID listed for each of adapters.
Some connection utilities in Windows allow to select sequence of preferred
BSSID (Acces Point Mac address). It seems NetworkManager just selects first AP
from the list.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.