https://bugzilla.novell.com/show_bug.cgi?id=643392
https://bugzilla.novell.com/show_bug.cgi?id=643392#c4
--- Comment #4 from Thidney Thidney 2010-10-04 19:15:41 UTC ---
Log attached in comment #3.
I still have 11.1 isntallation and it work correctly. As I stated in
description I copy same data in 11.1 without any error or warning in log.
Today I wanted to create log for you. First I run long test via smartctl.
Without problem.
Later I clear /var/log/messages and rebooted. Then I copy same data as usualy,
but vithout any error.
I copy some more data And receive warning
Oct 4 20:13:39 linux-vr7z dhclient: XMT: Solicit on eth0, interval 109050ms.
Oct 4 20:15:11 linux-vr7z kernel: [ 490.501851] ata3.01: exception Emask 0x10
SAct 0x0 SErr 0x280100 action 0x0
Oct 4 20:15:11 linux-vr7z kernel: [ 490.501855] ata3.01: SError: {
UnrecovData 10B8B BadCRC }
Oct 4 20:15:11 linux-vr7z kernel: [ 490.501859] ata3.01: failed command: READ
DMA EXT
Oct 4 20:15:11 linux-vr7z kernel: [ 490.501864] ata3.01: cmd
25/00:40:81:93:18/00:00:3e:00:00/f0 tag 0 dma 32768 in
Oct 4 20:15:11 linux-vr7z kernel: [ 490.501865] res
51/84:2f:92:93:18/84:00:3e:00:00/f0 Emask 0x30 (host bus error)
Oct 4 20:15:11 linux-vr7z kernel: [ 490.501867] ata3.01: status: { DRDY ERR }
Oct 4 20:15:11 linux-vr7z kernel: [ 490.501869] ata3.01: error: { ICRC ABRT }
Oct 4 20:15:11 linux-vr7z kernel: [ 490.501875] ata3.00: hard resetting link
Oct 4 20:15:11 linux-vr7z kernel: [ 490.806012] ata3.01: hard resetting link
Oct 4 20:15:11 linux-vr7z kernel: [ 491.262095] ata3.00: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct 4 20:15:11 linux-vr7z kernel: [ 491.262107] ata3.01: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct 4 20:15:11 linux-vr7z kernel: [ 491.290316] ata3.00: configured for
UDMA/133
Oct 4 20:15:11 linux-vr7z kernel: [ 491.309252] ata3.01: configured for
UDMA/133
Oct 4 20:15:11 linux-vr7z kernel: [ 491.309262] ata3: EH complete
But I was not able to crash raid into read only mode.
I will wait till next error and try to what you suggest(cables & powers)
Till then I will leave needinfo on me.
Thanks
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.