http://bugzilla.novell.com/show_bug.cgi?id=621470
http://bugzilla.novell.com/show_bug.cgi?id=621470#c2
--- Comment #2 from Glenn Doig
as root /usr/bin # ./kismet_server ERROR: Kismet was started as root, NOT launching external control binary. This is NOT the preferred method of starting Kismet as Kismet will continue to run as root the entire time. Please read the README file section about Installation & Security and be sure this is what you want to do. INFO: Reading from config file /etc/kismet.conf INFO: No 'dronelisten' config line and no command line drone-listen argument given, Kismet drone server will not be enabled. INFO: Created alert tracker... ERROR: Failed to open primary plugin directory (/usr/lib64/kismet/): No such file or directory ERROR: Failed to open user plugin directory (/root/.kismet//plugins/): No such file or directory INFO: Kismet will spend extra time on channels 1,6,11 INFO: Kismet will dwell on each channel for 10 seconds unless overridden by source-specific options. INFO: No specific sources named on the command line, sources will be read from kismet.conf INFO: Matched source type 'b43' for auto-type source 'wlan0' INFO: Using hardware channel list 1:3,2,3,4,5,6:3,7,8,9,10,11:3,12,13,14, 14 channels on source wlan0 INFO: Source 'wlan0' will attempt to create and use a monitor-only VAP instead of reconfiguring the main interface INFO: Created source wlan0 with UUID d3d6ca26-8d96-11df-9341-ab02e00be201 INFO: Will attempt to reopen on source 'wlan0' if there are errors INFO: Created TCP listener on port 2501 INFO: Kismet drone framework disabled, drone will not be activated. INFO: Inserting basic packet dissectors... INFO: Allowing Kismet frontends to view WEP keys INFO: Starting GPS components... INFO: Enabling reconnection to the GPS device if the link is lost INFO: Using GPSD server on localhost:2947 ERROR: Could not connect to GPSD server ERROR: Could not open OUI file '/etc/manuf': No such file or directory ERROR: Could not open OUI file '/usr/share/wireshark/wireshark/manuf': No such file or directory ERROR: Could not open OUI file '/usr/share/wireshark/manuf': No such file or directory ERROR: No OUI files were available, will not resolve manufacturer names for MAC addresses INFO: Creating network tracker... INFO: Creating channel tracker... INFO: Registering dumpfiles... ERROR: Cannot log in PPI format, the libpcap available when Kismet was compiled did not support PPI, defaulting to basic packet format. INFO: Opened pcapdump log file '/var/log/Kismet-20100712-19-21-18-1.pcapdump' INFO: Opened netxml log file '/var/log/Kismet-20100712-19-21-18-1.netxml' INFO: Opened nettxt log file '/var/log/Kismet-20100712-19-21-18-1.nettxt' INFO: Opened gpsxml log file '/var/log/Kismet-20100712-19-21-18-1.gpsxml' INFO: Opened alert log file '/var/log/Kismet-20100712-19-21-18-1.alert' INFO: Kismet starting to gather packets ERROR: SetIFFlags: interface wlan0: No such file or directory ERROR: Failed to bring up interface 'wlan0', this often means there is a problem with the driver (such as missing firmware), check the output of `dmesg'. ERROR: Could not connect to the GPSD server, will reconnect in 5 seconds ERROR: Could not connect to the GPSD server, will reconnect in 10 seconds INFO: Attempting to re-open errored packet source wlan0 ERROR: SetIFFlags: interface wlan0: No such file or directory ERROR: Failed to bring up interface 'wlan0', this often means there is a problem with the driver (such as missing firmware), check the output of `dmesg'.
#------------------------------------------------------------- dmesg . . . [ 2378.074269] b43 ssb0:0: firmware: requesting b43/ucode15.fw [ 2378.082442] b43 ssb0:0: firmware: requesting b43-open/ucode15.fw [ 2378.090634] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found [ 2378.090639] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found [ 2378.090642] b43-phy0 ERROR: Please open a terminal and enter the command "sudo /usr/sbin/install_bcm43xx_firmware" to download the correct firmware for this driver version. For an off-line installation, go to http://en.opensuse.org/HCL/Network_Adapters_(Wireless)/Broadcom_BCM43xx and follow the instructions in the "Installing firmware from RPM packages" section. [ 2378.090700] device wlan0 entered promiscuous mode [ 2388.162256] b43 ssb0:0: firmware: requesting b43/ucode15.fw [ 2388.169620] b43 ssb0:0: firmware: requesting b43-open/ucode15.fw [ 2388.176352] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found [ 2388.176357] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found [ 2388.176361] b43-phy0 ERROR: Please open a terminal and enter the command "sudo /usr/sbin/install_bcm43xx_firmware" to download the correct firmware for this driver version. For an off-line installation, go to http://en.opensuse.org/HCL/Network_Adapters_(Wireless)/Broadcom_BCM43xx and follow the instructions in the "Installing firmware from RPM packages" section. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.