http://bugzilla.novell.com/show_bug.cgi?id=586837
http://bugzilla.novell.com/show_bug.cgi?id=586837#c16
Dennis Olsson changed:
What |Removed |Added
----------------------------------------------------------------------------
Version|Milestone 3 |RC 2
--- Comment #16 from Dennis Olsson 2010-07-07 02:11:33 CEST ---
Have tested with openSUSE 11.3 RC2.
Still does not work!
After the installation procedure reaches the 1. reboot, the system cannot
reboot correctly, in that it stops with the message "Waiting for device
/dev/disk/by-label/root113 to appear: ............", a device node that never
appears!
For complete error messages, see attachment "20100707T0039 Error messages.jpg".
After having tried with "Y", the boot sequence continues, but still cannot
mount any of the file systems using "LABEL=<name>"; Here it fails to mount
"/home" and "/boot" (attachment "20100707T0050 More errors.jpg").
In spite of these errors the installation procedure continues, although warning
about "/home" not having been mounted, which may cause problems later on.
Also, the MD device has not been correctly assembled (see also bug #588840c11),
even to the extend that "/dev/sda" has been removed; Needed to re-add it
manually.
After having awaiting the resync'ing of the re-added "/dev/sda" disk, the
system was rebooted to see, if it would be able to boot correctly.
Unfortunately, the installed system cannot boot cleanly -- It has the same
problem as during the 1. pre-install rebooting, i.e. is waiting on the
"/dev/disk/by-label/root113" to appear!
Answering "Y" to the question of using "/dev/mapper/system-root" instead,
allows for the boot sequence to continue, but once again neither "/boot"
(LABEL=boot) nor "/home" (LABEL=home) gets mounted!
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.