http://bugzilla.novell.com/show_bug.cgi?id=612910
http://bugzilla.novell.com/show_bug.cgi?id=612910#c8
--- Comment #8 from Michael Schmidt 2010-06-20 15:47:07 UTC ---
The both isadump-commands gets all ffh back.
Here is the new output from sensors:
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +33.5°C (high = +70.0°C, crit = +81.0°C)
it8720-isa-0228
Adapter: ISA adapter
Vcore: +1.07 V (min = +0.78 V, max = +1.50 V)
Vdram: +1.49 V (min = +1.42 V, max = +1.57 V)
+3.3V: +3.33 V (min = +3.14 V, max = +3.47 V)
+5V: +5.03 V (min = +4.76 V, max = +5.24 V)
+12V: +12.24 V (min = +11.41 V, max = +12.62 V)
in5: +1.95 V (min = +0.00 V, max = +4.08 V)
in7: +2.16 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.22 V
CPU Fan: 1626 RPM (min = 1000 RPM)
Sys Fan: 2227 RPM (min = 1000 RPM)
temp1: +43.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
CPU Temp: +30.0°C (low = +127.0°C, high = +70.0°C) sensor = thermal diode
temp3: +35.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
cpu0_vid: +0.413 V
But here is new problem:
If here is a setting not correct - e.g. the Fan_min to high - an I get a ALARM,
I can the sound not turn of with a correct value in sensor3.conf and a sensors
-s. I can the sound only turn of with a reboot of the computer.
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.