http://bugzilla.novell.com/show_bug.cgi?id=559697
http://bugzilla.novell.com/show_bug.cgi?id=559697#c37
--- Comment #37 from pierre Labarbe 2009-12-23 10:03:45 UTC ---
IIf uou open this web page
http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/faq_scn.html
and yoy select
When scanning I receive the error "Error during device I/O".
you find this page
"# When scanning I receive the error "Error during device I/O".
The Brother Linux scanner driver works only with a superuser by default.
To use it with a normal user, you will have to make some settings.
Setting for normal users "
setting for normal user give
"openSUSE11.2
1. Open "/etc/udev/rules.d/55-libsane.rules"
2. Add the following 2 lines at the last of the device entry. (just before
"# The following rule...")
# Brother
ATTR{idVendor}=="04f9", MODE="0664", GROUP="lp", ENV{libsane_matched}="yes"
3. Restart the OS.
page top
openSUSE 11.1
1. Open "/etc/udev/rules.d/55-libsane.rules"
2. Add 2 lines for Brother products.
The lines to be added---------------------------------
#Brother
ATTR{idVendor}=="04f9", MODE="0666", GROUP="scanner",
ENV{libsane_matched}="yes""
it is different for suse 11.1 and suse 11.2
during my instal this information was not updated and i have modified like for
suse 11.1
now I modified 55 libsane rules and I get the same problem
I observe that mode is 664 and every where "mode 664" ha to bee replace by
"mode 666"
I wil try to replace 664 by 666 and will give the result
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.