http://bugzilla.novell.com/show_bug.cgi?id=559048 http://bugzilla.novell.com/show_bug.cgi?id=559048#c0 Summary: Boot hangs at "Starting udevd", "Loading drivers, configuring devices" until timeout (3 minutes) Classification: openSUSE Product: openSUSE 11.2 Version: Final Platform: x86-64 OS/Version: openSUSE 11.2 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: alexander.koenig@koenig-a.de QAContact: qa@suse.de Found By: --- Blocker: --- Created an attachment (id=329908) --> (http://bugzilla.novell.com/attachment.cgi?id=329908) Boot messages User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; de; rv:1.9.1.5) Gecko/20091103 SUSE/3.5.5-1.1.2 Firefox/3.5.5 Because of bug 548108 I had to install and boot my system with kernel parameter "acpi=ht". Whenever I boot I get messages like on the attached picture (the fsck message of course differ. Proper disk unmouting at shutdown doesn't work either - separate bug report) When it reaches "Starting udevd", "Loading drivers, configuring devices" the boot process hangs for more than three minutes. Even with "acpi=ht" openSUSE - on another partition of the same computer - boots normally without delay. Reproducible: Always Steps to Reproduce: 1.Boot system with "acpi=ht" 2.Press <ESC> to see boot messages Actual Results: System nangs at "Starting udevd", "Loading drivers, configuring devices" Boot contunues after about 3 minutes Expected Results: Boot process without major delay Hardware: - CPU: AMD Phenom X4 9550 4x2.2GHz (95W) 65nm Quad Core - Memory: 4GB - 2x2048MB DDR2-800 CL5, Dual Channel 2x1024MB - Motherboard: GIGABYTE GA-MA770-DS3, AMD 770 / SB600 chipsets - Graphics: NVidia GeForce 7300 GS, 256MB, TV-Out, DVI, PCIe - Floppy: 1.44MB - 1. hard disk: 500GB Seagate 7200 RPM SATA II - 2. hard disk: 500GB Seagate 7200 RPM SATA II - DVD-ROM: Optiarc DDU 1615 16x/48x, IDE - DVD-RW: NEC AD-7200, IDE - SCSI-Controller: Adaptec 2940 SCSI adapter, SCSI ID: 7 - Tape Streamer: Seagate (CONNER) CTT8000-S SCSI Tr 4, SCSI ID: 4 - Scanner: UMAX Astra 610S SCSI SCSI ID: 5 - Card Reader: Apacer AE101, 16 card types - DVB Controller: Technotrend/Hauppauge DVB card rev2.1 - Modem: ELSA MicroLink 56k basic V90 - Webcam: Lifetec LT 9338 USB Camera -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.