http://bugzilla.novell.com/show_bug.cgi?id=558054 http://bugzilla.novell.com/show_bug.cgi?id=558054#c0 Summary: radeonhd[HD4200/RS880, Asus M4A785D-M PRO Mainboard] Xserver shows no output (screen going powersave) Classification: openSUSE Product: openSUSE 11.1 Version: Final Platform: i686 OS/Version: openSUSE 11.1 Status: NEW Severity: Normal Priority: P5 - None Component: X.Org AssignedTo: bnc-team-xorg-bugs@forge.provo.novell.com ReportedBy: abittner@stud.fh-heilbronn.de QAContact: xorg-maintainer-bugs@forge.provo.novell.com CC: sndirsch@novell.com Depends on: 470341 Found By: --- Blocker: --- +++ This bug was initially created as a clone of Bug #470341 +++ this is the same bug as Bug #470341, but on the rs880 radeon hd 4200 gpu chipset, released second half of 2009, on amd/ati 785G based chipsets using with opensuse 11.1 again same as the other bug, also with xorg-x11-driver-video-radeonhd-1.3.0_20091106_619706-2.2 opensuse 11.1, x86, all onlineupdate patches applied. my system uses the above mainboard, with only using the mainboards vga (dsub15) connector, in combination with a hardware kvm (keyboard video mouse) switch (avocent switchview mm1), it distributes dsub15 vga signals and usb (1.x) signals for keyboard/mouse/etc.. physical monitor (lge, flatpanel, flatron l227wt) is attached also via dsub vga15 to either the kvm switch or to the mainboard directly for this bugreport. summing up this bug, because of already obtained knowledge while going through the bugreporting of the other bug: the whole problem boils down to, that the current opensuse systems (will provide more feedback for opensuse 11.2 later, also in the other bug you can already find logfiles etc.) seem to have a serious problem when the system boots up with the kvm switch-port being activated (screen output visible all the time from the affected opensuse system) for the affected system. the Xserver then cannout initialize the graphics mode, and doesnt output pixels or initialize the vga port or whatever it is exactly. whenever i reboot the opensuse system (in this bug, and from the other bug handling the HD3xxx system) but the kvm switchport NOT being set/activated for the affected system but for example another running windows system or just another dead kvm switch-port and waiting for a while til the opensuse system most likely finished the bootprocess and only then switching the kvm switch-port to that opensuse system, then the Xserver is apparently running fine (more or less) and was able to activate the signals and is outputting pixels on the vga port of the mainboard, and the kvm(-switchport) receiving the vga signals, and my flatpanel monitor shows the vga signals normally. log files and more explanations will follow. please always see attachment/logfile names for more details about the steps/situation when they were recorded. -- Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.