http://bugzilla.novell.com/show_bug.cgi?id=537016#c5
Peter Oddo changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
CC| |poddo@suffolk.lib.ny.us
Info Provider|poddo@suffolk.lib.ny.us |
--- Comment #5 from Peter Oddo 2009-11-18 03:28:53 UTC ---
hwinfo --network after boot
24: None 00.0: 10700 Loopback
[Created at net.124]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: "Loopback network interface"
Device File: lo
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
25: None 00.0: 10701 Ethernet
[Created at net.124]
Unique ID: usDW.ndpeucax6V1
Parent ID: rBUF.0NgK5ZS9c0D
SysFS ID: /class/net/eth0
SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:02:07.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "tulip"
Driver Modules: "tulip"
Device File: eth0
HW Address: 00:08:a1:21:f3:1f
Link detected: no
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (Ethernet controller)
26: None 00.0: 10701 Ethernet
[Created at net.124]
Unique ID: fLK9.ndpeucax6V1
SysFS ID: /class/net/pan0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "bridge"
Device File: pan0
HW Address: 92:a4:ab:51:9a:94
Config Status: cfg=new, avail=yes, need=no, active=unknown
hwinfo --network after switching to dmfe driver
24: None 00.0: 10700 Loopback
[Created at net.124]
Unique ID: ZsBS.GQNx7L4uPNA
SysFS ID: /class/net/lo
Hardware Class: network interface
Model: "Loopback network interface"
Device File: lo
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
25: None 00.0: 10701 Ethernet
[Created at net.124]
Unique ID: usDW.ndpeucax6V1
Parent ID: rBUF.0NgK5ZS9c0D
SysFS ID: /class/net/eth0
SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:02:07.0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "dmfe"
Driver Modules: "dmfe"
Device File: eth0
HW Address: 00:08:a1:21:f3:1f
Link detected: yes
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #10 (Ethernet controller)
26: None 00.0: 10701 Ethernet
[Created at net.124]
Unique ID: fLK9.ndpeucax6V1
SysFS ID: /class/net/pan0
Hardware Class: network interface
Model: "Ethernet network interface"
Driver: "bridge"
Device File: pan0
HW Address: 92:a4:ab:51:9a:94
Config Status: cfg=new, avail=yes, need=no, active=unknown
hwinfo --netcard after boot
18: PCI 207.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1282_9102
Unique ID: rBUF.0NgK5ZS9c0D
Parent ID: 6NW+.eDbWAYN5SdB
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:07.0
SysFS BusID: 0000:02:07.0
Hardware Class: network
Model: "Davicom 21x4x DEC-Tulip compatible 10/100 Ethernet"
Vendor: pci 0x1282 "Davicom Semiconductor, Inc."
Device: pci 0x9102 "21x4x DEC-Tulip compatible 10/100 Ethernet"
SubVendor: pci 0x4554
SubDevice: pci 0x434e
Revision: 0x31
Driver: "tulip"
Driver Modules: "tulip"
Device File: eth0
I/O Ports: 0xec00-0xecff (rw)
Memory Range: 0xfe2ffc00-0xfe2ffcff (rw,non-prefetchable)
Memory Range: 0xfe200000-0xfe23ffff (ro,prefetchable,disabled)
IRQ: 16 (738 events)
HW Address: 00:08:a1:21:f3:1f
Link detected: no
Module Alias: "pci:v00001282d00009102sv00004554sd0000434Ebc02sc00i00"
Driver Info #0:
Driver Status: dmfe is not active
Driver Activation Cmd: "modprobe dmfe"
Driver Info #1:
Driver Status: tulip is active
Driver Activation Cmd: "modprobe tulip"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (PCI bridge)
hwinfo --netcard after switching to dmfe driver
18: PCI 207.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_1282_9102
Unique ID: rBUF.0NgK5ZS9c0D
Parent ID: 6NW+.eDbWAYN5SdB
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:07.0
SysFS BusID: 0000:02:07.0
Hardware Class: network
Model: "Davicom 21x4x DEC-Tulip compatible 10/100 Ethernet"
Vendor: pci 0x1282 "Davicom Semiconductor, Inc."
Device: pci 0x9102 "21x4x DEC-Tulip compatible 10/100 Ethernet"
SubVendor: pci 0x4554
SubDevice: pci 0x434e
Revision: 0x31
Driver: "dmfe"
Driver Modules: "dmfe"
Device File: eth0
I/O Ports: 0xec00-0xecff (rw)
Memory Range: 0xfe2ffc00-0xfe2ffcff (rw,non-prefetchable)
Memory Range: 0xfe200000-0xfe23ffff (ro,prefetchable,disabled)
IRQ: 16 (1351 events)
HW Address: 00:08:a1:21:f3:1f
Link detected: yes
Module Alias: "pci:v00001282d00009102sv00004554sd0000434Ebc02sc00i00"
Driver Info #0:
Driver Status: dmfe is active
Driver Activation Cmd: "modprobe dmfe"
Driver Info #1:
Driver Status: tulip is not active
Driver Activation Cmd: "modprobe tulip"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (PCI bridge)
Hope this helps.
--
Configure bugmail: http://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.