https://bugzilla.novell.com/show_bug.cgi?id=462383
User jengelh@medozas.de added comment
https://bugzilla.novell.com/show_bug.cgi?id=462383#c6
--- Comment #6 from Jan Engelhardt 2009-01-20 16:04:43 MST ---
Yes maybe I SHOULD tuck the battery in. But the timing "4 minutes" is
absolutely false.
23:54 takeshi:~ > powersave -b
Battery1:
Remaining percent: 99
Remaining minutes: 4 minutes
Charging state: charging
23:54 takeshi:~ > cd /proc/acpi/battery/BAT1/
23:55 takeshi:../battery/BAT1 > grep '' *
alarm:alarm: unsupported
info:present: yes
info:design capacity: 59940 mWh
info:last full capacity: 57740 mWh
info:battery technology: non-rechargeable
info:design voltage: 11100 mV
info:design capacity warning: 0 mWh
info:design capacity low: 120 mWh
info:capacity granularity 1: 0 mWh
info:capacity granularity 2: 10 mWh
info:model number:
info:serial number:
info:battery type: LION
info:OEM info: Sony Corp.
state:present: yes
state:capacity state: ok
state:charging state: charging
state:present rate: 4731 mW
state:remaining capacity: 57380 mWh
state:present voltage: 12550 mV
After a while, the number in "4 minutes" grew to "5 minutes". I dunno what's
going on, since the 11.0-powersave also shows 5 minutes. The battery certainly
is loaded above 95% because the hardware LED does not indicate "loading".
As for thermal info:
#powersave from 11.0 works perfect:
00:00 takeshi:/dev/shm/rt > LD_LIBRARY_PATH=$PWD/usr/lib ./usr/bin/powersave -T
Thermal Device no. 0:
Temperature: 39
Critical: 90
Active 0: 79
# thermal info from /proc/acpi/thermal_zone/ATF0/
00:01 takeshi:../thermal_zone/ATF0 > grep '' *
cooling_mode:<setting not supported>
polling_frequency:<polling disabled>
state:state: ok
temperature:temperature: 38 C
trip_points:critical (S5): 90 C
trip_points:active[0]: 79 C: devices=LRA0
The 11.1 powersave does not return me thermal info, which needs to be fixed.
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.