https://bugzilla.novell.com/show_bug.cgi?id=440928
User suse-list3@bout-tyme.net added comment
https://bugzilla.novell.com/show_bug.cgi?id=440928#c5
--- Comment #5 from Ken Schneider 2008-11-07 08:56:08 MST ---
Created an attachment (id=250709)
--> (https://bugzilla.novell.com/attachment.cgi?id=250709)
YaST2 log files from Ken
These are the y2log files from Ken
Card info:
21: PCI 0a.0: 0200 Ethernet controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_10de_54c
Unique ID: rBUF.Qh8YuQ9wg77
SysFS ID: /devices/pci0000:00/0000:00:0a.0
SysFS BusID: 0000:00:0a.0
Hardware Class: network
Model: "nVidia MCP67 Ethernet"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x054c "MCP67 Ethernet"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x30cf
Revision: 0xa2
Driver: "forcedeth"
Driver Modules: "forcedeth"
Device File: eth0
Memory Range: 0xf2588000-0xf2588fff (rw,non-prefetchable)
I/O Ports: 0x30f8-0x30ff (rw)
Memory Range: 0xf2589c00-0xf2589cff (rw,non-prefetchable)
Memory Range: 0xf2589800-0xf258980f (rw,non-prefetchable)
IRQ: 220 (16922354 events)
HW Address: 00:1e:68:a5:f9:ea
Link detected: yes
Module Alias: "pci:v000010DEd0000054Csv0000103Csd000030CFbc02sc00i00"
Driver Info #0:
Driver Status: forcedeth is active
Driver Activation Cmd: "modprobe forcedeth"
Config Status: cfg=no, avail=yes, need=no, active=unknown
34: PCI 300.0: 0280 Network controller
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_14e4_4328
Unique ID: svHJ.XEGEu1Nec22
Parent ID: qnJ_.iXEd68VX6l3
SysFS ID: /devices/pci0000:00/0000:00:0d.0/0000:03:00.0
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "Broadcom BCM4328 802.11a/b/g/n"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4328 "BCM4328 802.11a/b/g/n"
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x1366
Revision: 0x03
Driver: "b43-pci-bridge"
Driver Modules: "ssb"
Memory Range: 0xf2200000-0xf2203fff (rw,non-prefetchable)
Memory Range: 0xf2000000-0xf20fffff (rw,prefetchable)
IRQ: 10 (913 events)
Module Alias: "pci:v000014E4d00004328sv0000103Csd00001366bc02sc80i00"
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #23 (PCI bridge)
42: USB 00.0: 0000 Unclassified device
[Created at usb.122]
UDI: /org/freedesktop/Hal/devices/usb_device_7d1_3c04_noserial_if0
Unique ID: KRJj.siZwOOFHzW4
Parent ID: uIhY.OqydEZZ981A
SysFS ID: /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0
SysFS BusID: 3-1:1.0
Hardware Class: unknown
Model: "D-Link 802.11 bg WLAN"
Hotplug: USB
Vendor: usb 0x07d1 "D-Link System"
Device: usb 0x3c04 "802.11 bg WLAN"
Revision: "0.01"
Driver: "rt73usb"
Driver Modules: "rt73usb"
Device File: wmaster0
Speed: 480 Mbps
HW Address: 00:1e:58:b4:04:a7
Module Alias: "usb:v07D1p3C04d0001dc00dsc00dp00icFFiscFFipFF"
Driver Info #0:
Driver Status: rt73usb is active
Driver Activation Cmd: "modprobe rt73usb"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #37 (Hub)
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.