https://bugzilla.novell.com/show_bug.cgi?id=398337 Summary: Marvell 88SE6145 SataII controller not working Product: openSUSE 11.0 Version: RC 1 Platform: 64bit OS/Version: openSUSE 11.0 Status: NEW Severity: Major Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: birger.kollstrand@googlemail.com QAContact: jsrain@novell.com CC: pth@novell.com Found By: Beta-Customer I just inistalled a brand new machine with 11Rc1. It has a Marvell 88SE6145 SataII kontroller. It seems that 11.0RC1 identifies this as a PATA device as the driver loaded is pata_marvell. Should it not be the sata_mv driver that should be loaded? (ref. information here : http://linux-ata.org/driver-status.html#marvell) hwinfo: 100: udi = '/org/freedesktop/Hal/devices/pci_11ab_6145' pci.vendor_id = 4523 (0x11ab) linux.subsystem = 'pci' info.subsystem = 'pci' info.linux.driver = 'pata_marvell' pci.subsys_product_id = 33462 (0x82b6) info.product = '88SE6145 SATA II PCI-E controller' pci.subsys_vendor_id = 4163 (0x1043) info.udi = '/org/freedesktop/Hal/devices/pci_11ab_6145' pci.device_class = 1 (0x1) pci.device_subclass = 1 (0x1) pci.device_protocol = 143 (0x8f) pci.vendor = 'Marvell Technology Group Ltd.' linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.4/0000:02:00.0' info.vendor = 'Marvell Technology Group Ltd.' info.parent = '/org/freedesktop/Hal/devices/pci_8086_2948' pci.product = '88SE6145 SATA II PCI-E controller' pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1c.4/0000:02:00.0' pci.subsys_vendor = 'ASUSTeK Computer Inc.' pci.product_id = 24901 (0x6145) linux.hotplug_type = 2 (0x2) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.