Mailinglist Archive: opensuse-bugs (19716 mails)
| < Previous | Next > |
[Bug 387702] High Temperature on Acer laptops, one powers off in Performance
- From: bugzilla_noreply@xxxxxxxxxx
- Date: Wed, 21 May 2008 04:40:03 -0600 (MDT)
- Message-id: <20080521104003.8A648CC6D4@xxxxxxxxxxxxxxxxxxxxxx>
https://bugzilla.novell.com/show_bug.cgi?id=387702
User sboyce@xxxxxxxxxxxxxxxx added comment
https://bugzilla.novell.com/show_bug.cgi?id=387702#c11
--- Comment #11 from Sid Boyce <sboyce@xxxxxxxxxxxxxxxx> 2008-05-21 04:40:03
MST ---
Laptop has been idle overnight, "powersave -f" doesn't cause speed to increase
to 1800 MHz. There is not a trace of dust in the vents and previously when it's
powered off, the exhaust temp (felt by hand) is less than on the 7520. It's
possible the heatsink to CPU thermal contact isn't what it should be, but I
haven't been able to get inside to check it.
Boycie:~ # cat /proc/acpi/thermal_zone/*/*
0 - Active; 1 - Passive
<polling disabled>
state: passive
temperature: 95 C
critical (S5): 98 C
passive: 90 C: tc1=2 tc2=5 tsp=300 devices=CPU0
0 - Active; 1 - Passive
<polling disabled>
state: passive
temperature: 80 C
critical (S5): 82 C
passive: 75 C: tc1=2 tc2=5 tsp=300 devices=CPU0
Boycie:~ # sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +68.0°C
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
User sboyce@xxxxxxxxxxxxxxxx added comment
https://bugzilla.novell.com/show_bug.cgi?id=387702#c11
--- Comment #11 from Sid Boyce <sboyce@xxxxxxxxxxxxxxxx> 2008-05-21 04:40:03
MST ---
Laptop has been idle overnight, "powersave -f" doesn't cause speed to increase
to 1800 MHz. There is not a trace of dust in the vents and previously when it's
powered off, the exhaust temp (felt by hand) is less than on the 7520. It's
possible the heatsink to CPU thermal contact isn't what it should be, but I
haven't been able to get inside to check it.
Boycie:~ # cat /proc/acpi/thermal_zone/*/*
0 - Active; 1 - Passive
<polling disabled>
state: passive
temperature: 95 C
critical (S5): 98 C
passive: 90 C: tc1=2 tc2=5 tsp=300 devices=CPU0
0 - Active; 1 - Passive
<polling disabled>
state: passive
temperature: 80 C
critical (S5): 82 C
passive: 75 C: tc1=2 tc2=5 tsp=300 devices=CPU0
Boycie:~ # sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +68.0°C
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
| < Previous | Next > |