https://bugzilla.novell.com/show_bug.cgi?id=387207
User sboyce@blueyonder.co.uk added comment
https://bugzilla.novell.com/show_bug.cgi?id=387207#c1
Sid Boyce changed:
What |Removed |Added
----------------------------------------------------------------------------
CC| |sboyce@blueyonder.co.uk
--- Comment #1 from Sid Boyce 2008-05-06 19:49:41 MST ---
My Acer 1501LCe powers off if I boot 11.0 Alpha onwards from CD/DVD, is OK with
10.3. It will generally get as far as software selection, then power down. Also
if I try building a kernel with "powersave -f" set. Building a kernel, I have
to set "powersave -l". The one difference I notice straight off is that 11.0
immediately puts the fan into high speed, I guess because that's because the
DVD kernel sets it to Performance.
On another laptop which doesn't suffer the same problem (travelMate 7520),
though it looks to be on the high side while currently building a new kernel.
With "powersave -A" and it's operating at max CPU speed. Kernel build completed
successfully and it has dropped back to 800Mhz.
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 104
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-58
stepping : 2
cpu MHz : 1900.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
3dnowprefetch
bogomips : 3855.76
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc 100mhzsteps
processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 104
model name : AMD Turion(tm) 64 X2 Mobile Technology TL-58
stepping : 2
cpu MHz : 1900.000
cache size : 512 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm
3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
3dnowprefetch
bogomips : 3855.76
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc 100mhzsteps
# sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +56.0°C
Core0 Temp: +60.0°C
Core1 Temp: +56.0°C
Core1 Temp: +57.0°C
Temperature readings not changing throughout the build.
After the kernel build, still:-
# sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +45.0°C
Core0 Temp: +47.0°C
Core1 Temp: +43.0°C
Core1 Temp: +43.0°C
Desktop with 64x2 6000+ (1000Mhz idle)
# sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +22.0°C
Core1 Temp: +30.0°C
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.