https://bugzilla.novell.com/show_bug.cgi?id=374106 User edearl@satx.rr.com added comment https://bugzilla.novell.com/show_bug.cgi?id=374106#c1 Summary: "SaX2 cannot offer 3d acceleration" on GeForce 7800 GS AGP. Product: openSUSE 10.3 Version: Final Platform: i386 OS/Version: openSUSE 10.3 Status: NEW Severity: Normal Priority: P5 - None Component: SaX2 AssignedTo: ms@novell.com ReportedBy: edearl@satx.rr.com QAContact: qa@suse.de Found By: Other FULL MESSAGE: "SaX2 cannot offer activation of the 3d subsystem because your graphics card/driver doesn't support 3d." However, the GeForce 7800 GS AGP is a 3d card, and openSUSE 10.2 does support 3d acceleration on my system. Buttons: --x11 ##Y2support-/tmp/siga/siga.txt: 1. Hardware ------------------------------------------------------------------------------- 1.1 procinfo - /usr/bin/procinfo Linux 2.6.22.17-0.1-default (geeko@buildhost) (gcc 4.2.1) #1 1CPU [ed.] Memory: Total Used Free Shared Buffers Mem: 1035968 944976 90992 0 27164 Swap: 522104 0 522104 Bootup: Wed Mar 26 13:43:55 2008 Load average: 1.17 1.81 1.38 1/242 4879 user : 0:06:22.85 44.4% page in : 670806 disk 1: 34094r 20560w nice : 0:00:23.27 2.7% page out: 186650 disk 2: 236r 26w system: 0:00:45.57 5.3% page act: 83284 IOwait: 0:01:39.44 11.5% page dea: 0 hw irq: 0:00:01.66 0.2% page flt: 1672184 sw irq: 0:00:02.30 0.3% swap in : 0 idle : 0:06:10.76 43.0% swap out: 0 uptime: 0:14:22.27 context : 1055972 irq 0: 277 timer irq 14: 15719 libata irq 1: 1603 i8042 irq 15: 56960 libata irq 3: 37 irq 17: 14239 uhci_hcd:usb1 irq 4: 39 irq 18: 0 uhci_hcd:usb2 irq 6: 11 floppy [2] irq 19: 2 ehci_hcd:usb3 irq 8: 2 rtc irq 20: 4806 Intel 82801DB-ICH4 irq 9: 1 acpi irq 21: 9189 eth0 irq 12: 4 i8042 ------------------------------------------------------------------------------- 1.2 cmdline - /proc/cmdline root=/dev/sda1 vga=0x31a resume=/dev/sdb3 splash=silent elevator=as ------------------------------------------------------------------------------- 1.3 lsPCI - /sbin/lspci 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01) 00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7800 GS] (rev a2) 05:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VM (LOM) Ethernet Controller (rev 81) lspci - /sbin/lspci -vvv 00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Unknown device 00b8 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- 00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- 05:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VM (LOM) Ethernet Controller (rev 81) Subsystem: Compaq Computer Corporation Unknown device 0012 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- &1 |:; /sbin/modprobe --ignore-install ata_piix include /etc/modprobe.d include /etc/modprobe.conf.local ------------------------------------------------------------------------------- 2.7 modprobe.conf.local - /etc/modprobe.conf.local no output ------------------------------------------------------------------------------- 2.8 messages filtered tail -n 200 /var/log/messages Mar 26 10:52:42 ed smartd[3195]: Device: /dev/sda, SMART Usage Attribute: 194 Temperature_Celsius changed from 88 to 91 Mar 26 11:14:29 ed dhclient: DHCPREQUEST on eth0 to 192.168.1.1 port 67 Mar 26 11:14:29 ed dhclient: DHCPACK from 192.168.1.1 Mar 26 11:14:29 ed dhclient: bound to 192.168.1.102 -- renewal in 1687 seconds. Mar 26 11:22:20 ed syslog-ng[2096]: STATS: dropped 0 Mar 26 11:42:36 ed dhclient: DHCPREQUEST on eth0 to 192.168.1.1 port 67 Mar 26 11:42:36 ed dhclient: DHCPACK from 192.168.1.1 Mar 26 11:42:36 ed dhclient: bound to 192.168.1.102 -- renewal in 1388 seconds. Mar 26 12:05:44 ed dhclient: DHCPREQUEST on eth0 to 192.168.1.1 port 67 Mar 26 12:05:44 ed dhclient: DHCPACK from 192.168.1.1 Mar 26 12:05:44 ed dhclient: bound to 192.168.1.102 -- renewal in 1369 seconds. Mar 26 12:22:20 ed syslog-ng[2096]: STATS: dropped 0 Mar 26 12:28:33 ed dhclient: DHCPREQUEST on eth0 to 192.168.1.1 port 67 Mar 26 12:28:33 ed dhclient: DHCPACK from 192.168.1.1 Mar 26 12:28:33 ed dhclient: bound to 192.168.1.102 -- renewal in 1425 seconds. Mar 26 12:52:18 ed dhclient: DHCPREQUEST on eth0 to 192.168.1.1 port 67 Mar 26 12:52:18 ed dhclient: DHCPACK from 192.168.1.1 Mar 26 12:52:18 ed dhclient: bound to 192.168.1.102 -- renewal in 1800 seconds. Mar 26 12:52:42 ed smartd[3195]: Device: /dev/sda, SMART Usage Attribute: 190 Temperature_Celsius changed from 91 to 88 Mar 26 12:52:42 ed smartd[3195]: Device: /dev/sda, SMART Usage Attribute: 194 Temperature_Celsius changed from 91 to 88 Mar 26 13:18:45 ed kcheckpass[13298]: Authentication failure for edearl (invoked by uid 1000) Mar 26 13:18:53 ed kcheckpass[13300]: Authentication failure for edearl (invoked by uid 1000) Mar 26 13:22:18 ed dhclient: DHCPREQUEST on eth0 to 192.168.1.1 port 67 Mar 26 13:22:18 ed dhclient: DHCPACK from 192.168.1.1 Mar 26 13:22:18 ed dhclient: bound to 192.168.1.102 -- renewal in 1652 seconds. Mar 26 13:22:20 ed syslog-ng[2096]: STATS: dropped 0 Mar 26 13:37:05 ed kernel: end_request: I/O error, dev fd0, sector 0 Mar 26 13:37:05 ed kernel: end_request: I/O error, dev fd0, sector 0 Mar 26 13:37:33 ed kernel: pnp: Device 00:07 disabled. Mar 26 13:37:34 ed kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff Mar 26 13:37:34 ed kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff Mar 26 13:37:34 ed kernel: parport 0x378: You gave this address, but there is probably no parallel port there! Mar 26 13:37:34 ed kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] Mar 26 13:37:34 ed kernel: pnp: Device 00:07 activated. Mar 26 13:37:34 ed kernel: parport_pc 00:07: reported by Plug and Play ACPI Mar 26 13:37:34 ed kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Mar 26 13:37:34 ed kernel: lp0: using parport0 (interrupt-driven). Mar 26 13:37:37 ed kernel: pnp: Device 00:07 disabled. Mar 26 13:37:37 ed kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff Mar 26 13:37:37 ed kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff Mar 26 13:37:37 ed kernel: parport 0x378: You gave this address, but there is probably no parallel port there! Mar 26 13:37:37 ed kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] Mar 26 13:37:37 ed kernel: ppa: Version 2.07 (for Linux 2.4.x) Mar 26 13:37:37 ed kernel: end_request: I/O error, dev fd0, sector 0 Mar 26 13:37:58 ed syslog-ng[2096]: last message repeated 3 times Mar 26 13:44:26 ed syslog-ng[2094]: syslog-ng version 1.6.12 starting Mar 26 13:44:27 ed rchal: CPU frequency scaling is not supported by your processor. Mar 26 13:44:27 ed rchal: boot with 'CPUFREQ=no' in to avoid this warning. Mar 26 13:44:27 ed rchal: Cannot load cpufreq governors - No cpufreq driver available Mar 26 13:44:31 ed kernel: klogd 1.4.1, log source = /proc/kmsg started. Mar 26 13:44:31 ed kernel: powernow: This module only works with AMD K7 CPUs Mar 26 13:44:35 ed kernel: NET: Registered protocol family 10 Mar 26 13:44:35 ed kernel: lo: Disabled Privacy Extensions Mar 26 13:44:35 ed kernel: Mobile IPv6 Mar 26 13:44:35 ed kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team Mar 26 13:44:36 ed SuSEfirewall2: Warning: ip6tables does not support state matching. Extended IPv6 support disabled. Mar 26 13:44:36 ed kernel: ip_tables: (C) 2000-2006 Netfilter Core Team Mar 26 13:44:36 ed kernel: Netfilter messages via NETLINK v0.30. Mar 26 13:44:36 ed kernel: nf_conntrack version 0.5.0 (8191 buckets, 65528 max) Mar 26 13:44:36 ed SuSEfirewall2: batch committing... Mar 26 13:44:37 ed SuSEfirewall2: Firewall rules set to CLOSE. Mar 26 13:44:37 ed network: Starting the DHCP DBUS Daemon Mar 26 13:44:38 ed network: Starting the NetworkManagerDispatcher Mar 26 13:44:38 ed network: Starting the NetworkManager Mar 26 13:44:38 ed kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready Mar 26 13:44:38 ed kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex Mar 26 13:44:38 ed kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Mar 26 13:44:38 ed dhcdbd: Started up. Mar 26 13:44:41 ed kernel: audit(1206557081.775:3): audit_pid=2797 old=0 by auid=4294967295 Mar 26 13:44:41 ed auditd[2797]: Init complete, auditd 1.5.5 listening for events (startup state disable) Mar 26 13:44:42 ed avahi-daemon[2847]: Found user 'avahi' (UID 105) and group 'avahi' (GID 108). Mar 26 13:44:42 ed avahi-daemon[2847]: Successfully dropped root privileges. Mar 26 13:44:42 ed avahi-daemon[2847]: avahi-daemon 0.6.20 starting up. Mar 26 13:44:42 ed kernel: NET: Registered protocol family 17 Mar 26 13:44:42 ed avahi-daemon[2847]: Loading service file /etc/avahi/services/sftp-ssh.service. Mar 26 13:44:42 ed avahi-daemon[2847]: Loading service file /etc/avahi/services/ssh.service. Mar 26 13:44:42 ed avahi-daemon[2847]: Network interface enumeration completed. Mar 26 13:44:42 ed avahi-daemon[2847]: Registering HINFO record with values 'I686'/'LINUX'. Mar 26 13:44:42 ed avahi-daemon[2847]: Server startup complete. Host name is ed.local. Local service cookie is 4284006968. Mar 26 13:44:42 ed avahi-daemon[2847]: Service "ed" (/etc/avahi/services/ssh.service) successfully established. Mar 26 13:44:42 ed avahi-daemon[2847]: Service "SFTP File Transfer on ed" (/etc/avahi/services/sftp-ssh.service) successfully established. Mar 26 13:44:43 ed dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 Mar 26 13:44:43 ed dhclient: DHCPACK from 192.168.1.1 Mar 26 13:44:43 ed dhclient: bound to 192.168.1.102 -- renewal in 1623 seconds. Mar 26 13:44:43 ed avahi-daemon[2847]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.1.102. Mar 26 13:44:43 ed avahi-daemon[2847]: New relevant interface eth0.IPv4 for mDNS. Mar 26 13:44:43 ed avahi-daemon[2847]: Registering new address record for 192.168.1.102 on eth0.IPv4. Mar 26 13:44:43 ed avahi-dnsconfd[2923]: Successfully connected to Avahi daemon. Mar 26 13:44:45 ed SuSEfirewall2: /var/lock/SuSEfirewall2.booting exists which means system boot in progress, exit. Mar 26 13:44:45 ed avahi-daemon[2847]: Registering new address record for fe80::208:2ff:fec4:b55 on eth0.*. Mar 26 13:44:49 ed /usr/sbin/cron[3134]: (CRON) STARTUP (V5.0) Mar 26 13:44:50 ed powersaved[3155]: WARNING (readConfigFile:173) Found actions variable for non existing event: 'global.suspend2disk' Mar 26 13:44:50 ed powersaved[3155]: WARNING (readConfigFile:173) Found actions variable for non existing event: 'global.suspend2ram' Mar 26 13:44:50 ed powersaved[3155]: WARNING (readConfigFile:173) Found actions variable for non existing event: 'global.standby' Mar 26 13:44:50 ed powersaved[3155]: WARNING (readConfigFile:173) Found actions variable for non existing event: 'global.resume.suspend2disk' Mar 26 13:44:50 ed powersaved[3155]: WARNING (readConfigFile:173) Found actions variable for non existing event: 'global.resume.suspend2ram' Mar 26 13:44:50 ed powersaved[3155]: WARNING (readConfigFile:173) Found actions variable for non existing event: 'global.resume.standby' Mar 26 13:44:50 ed powersaved[3155]: WARNING (readConfigFile:173) Found actions variable for non existing event: 'global.suspend2disk.other' Mar 26 13:44:53 ed powersaved[3155]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 26 13:44:53 ed powersaved[3155]: WARNING (CpufreqManagement:51) No capability cpufreq_control Mar 26 13:44:53 ed powersaved[3155]: WARNING (continueEvent:248) Could not execute program /usr/lib/powersave/scripts for event daemon.scheme.change: No such file or directory Mar 26 13:44:53 ed smartd[3174]: smartd version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen Mar 26 13:44:53 ed smartd[3174]: Home page is http://smartmontools.sourceforge.net/ Mar 26 13:44:53 ed smartd[3174]: Opened configuration file /etc/smartd.conf Mar 26 13:44:53 ed smartd[3174]: Drive: DEVICESCAN, implied '-a' Directive on line 27 of file /etc/smartd.conf Mar 26 13:44:53 ed smartd[3174]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices Mar 26 13:44:53 ed smartd[3174]: Problem creating device name scan list Mar 26 13:44:53 ed smartd[3174]: Device: /dev/sda, opened Mar 26 13:44:53 ed smartd[3174]: Device /dev/sda: ATA disk detected behind SAT layer Mar 26 13:44:53 ed smartd[3174]: Try adding '-d sat' to the device line in the smartd.conf file. Mar 26 13:44:53 ed smartd[3174]: For example: '/dev/sda -a -d sat' Mar 26 13:44:53 ed smartd[3174]: Device: /dev/sdb, opened Mar 26 13:44:54 ed smartd[3174]: Device /dev/sdb: ATA disk detected behind SAT layer Mar 26 13:44:54 ed smartd[3174]: Try adding '-d sat' to the device line in the smartd.conf file. Mar 26 13:44:54 ed smartd[3174]: For example: '/dev/sdb -a -d sat' Mar 26 13:44:54 ed smartd[3174]: Device: /dev/sda, opened Mar 26 13:44:54 ed kernel: eth0: no IPv6 routers present Mar 26 13:44:54 ed smartd[3174]: Device: /dev/sda, found in smartd database. Mar 26 13:44:55 ed smpppd[3184]: smpppd version 1.59 started Mar 26 13:44:55 ed smartd[3174]: Device: /dev/sda, is SMART capable. Adding to "monitor" list. Mar 26 13:44:55 ed smartd[3174]: Device: /dev/sdb, opened Mar 26 13:44:55 ed smartd[3174]: Device: /dev/sdb, found in smartd database. Mar 26 13:44:56 ed smartd[3174]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. Mar 26 13:44:56 ed smartd[3174]: Monitoring 2 ATA and 0 SCSI devices Mar 26 13:44:56 ed sshd[3225]: Server listening on :: port 22. Mar 26 13:44:56 ed smartd[3227]: smartd has fork()ed into background mode. New PID=3227. Mar 26 13:44:57 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/chargen [file=/etc/xinetd.conf] [line=26] Mar 26 13:44:57 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/chargen-udp [file=/etc/xinetd.d/chargen-udp] [line=12] Mar 26 13:44:57 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/cups-lpd [file=/etc/xinetd.d/cups-lpd] [line=13] Mar 26 13:44:57 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/cvs [file=/etc/xinetd.d/cvs] [line=10] Mar 26 13:45:00 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/daytime [file=/etc/xinetd.d/daytime] [line=14] Mar 26 13:45:00 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/daytime-udp [file=/etc/xinetd.d/daytime-udp] [line=12] Mar 26 13:45:00 ed SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ... Mar 26 13:45:00 ed SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext' Mar 26 13:45:00 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/discard [file=/etc/xinetd.d/discard] [line=13] Mar 26 13:45:01 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/discard-udp [file=/etc/xinetd.d/discard-udp] [line=12] Mar 26 13:45:01 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/echo [file=/etc/xinetd.d/echo] [line=13] Mar 26 13:45:01 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/echo-udp [file=/etc/xinetd.d/echo-udp] [line=12] Mar 26 13:45:01 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/netstat [file=/etc/xinetd.d/netstat] [line=13] Mar 26 13:45:01 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/rsync [file=/etc/xinetd.d/rsync] [line=14] Mar 26 13:45:01 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/sane-port [file=/etc/xinetd.d/sane-port] [line=11] Mar 26 13:45:01 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/servers [file=/etc/xinetd.d/servers] [line=13] Mar 26 13:45:01 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/services [file=/etc/xinetd.d/services] [line=12] Mar 26 13:45:01 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/svnserve [file=/etc/xinetd.d/svnserve] [line=12] Mar 26 13:45:02 ed xinetd[3230]: Unknown user: svn [file=/etc/xinetd.d/svnserve] [line=8] Mar 26 13:45:02 ed xinetd[3230]: Error parsing attribute user - DISABLING SERVICE [file=/etc/xinetd.d/svnserve] [line=8] Mar 26 13:45:02 ed xinetd[3230]: Unknown group: svn [file=/etc/xinetd.d/svnserve] [line=9] Mar 26 13:45:02 ed xinetd[3230]: Error parsing attribute group - DISABLING SERVICE [file=/etc/xinetd.d/svnserve] [line=9] Mar 26 13:45:02 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/swat [file=/etc/xinetd.d/swat] [line=12] Mar 26 13:45:02 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/systat [file=/etc/xinetd.d/systat] [line=11] Mar 26 13:45:02 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=15] Mar 26 13:45:02 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/time-udp [file=/etc/xinetd.d/time-udp] [line=13] Mar 26 13:45:02 ed xinetd[3230]: Reading included configuration file: /etc/xinetd.d/vnc [file=/etc/xinetd.d/vnc] [line=13] Mar 26 13:45:02 ed SuSEfirewall2: batch committing... Mar 26 13:45:02 ed xinetd[3230]: removing svn Mar 26 13:45:02 ed xinetd[3230]: Service chargen will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: Service chargen will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: Service daytime will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: Service daytime will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: Service discard will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: Service discard will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: Service echo will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: Service echo will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: No such internal service: servers/stream - DISABLING Mar 26 13:45:02 ed xinetd[3230]: No such internal service: services/stream - DISABLING Mar 26 13:45:02 ed xinetd[3230]: Service time will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: Service time will use IPv6 or fallback to IPv4 Mar 26 13:45:02 ed xinetd[3230]: xinetd Version 2.3.14 started with libwrap loadavg options compiled in. Mar 26 13:45:02 ed xinetd[3230]: Started working: 23 available services Mar 26 13:45:03 ed SuSEfirewall2: Firewall rules successfully set Mar 26 13:45:35 ed gconfd (edearl-3539): starting (version 2.20.0), pid 3539 user 'edearl' Mar 26 13:45:35 ed gconfd (edearl-3539): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0 Mar 26 13:45:35 ed gconfd (edearl-3539): Resolved address "xml:readwrite:/home/edearl/.gconf" to a writable configuration source at position 1 Mar 26 13:45:35 ed gconfd (edearl-3539): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2 Mar 26 13:45:35 ed gconfd (edearl-3539): Resolved address "xml:readonly:/etc/gconf/gconf.xml.schemas" to a read-only configuration source at position 3 Mar 26 13:48:39 ed sudo: edearl : TTY=pts/4 ; PWD=/home/edearl ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 26 13:48:39 ed sudo: edearl : TTY=pts/4 ; PWD=/home/edearl ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 26 13:49:15 ed kernel: st: Version 20070203, fixed bufsize 32768, s/g segs 256 Mar 26 13:49:18 ed kernel: end_request: I/O error, dev fd0, sector 0 Mar 26 13:49:18 ed kernel: end_request: I/O error, dev fd0, sector 0 Mar 26 13:49:49 ed kernel: pnp: Device 00:07 disabled. Mar 26 13:49:49 ed kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff Mar 26 13:49:49 ed kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff Mar 26 13:49:49 ed kernel: parport 0x378: You gave this address, but there is probably no parallel port there! Mar 26 13:49:49 ed kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] Mar 26 13:49:50 ed kernel: lp0: using parport0 (polling). Mar 26 13:49:50 ed kernel: pnp: Device 00:07 activated. Mar 26 13:49:50 ed kernel: parport_pc 00:07: reported by Plug and Play ACPI Mar 26 13:49:50 ed kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Mar 26 13:49:50 ed kernel: lp0: using parport0 (interrupt-driven). Mar 26 13:49:56 ed kernel: pnp: Device 00:07 disabled. Mar 26 13:49:56 ed kernel: parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff Mar 26 13:49:56 ed kernel: parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff Mar 26 13:49:56 ed kernel: parport 0x378: You gave this address, but there is probably no parallel port there! Mar 26 13:49:56 ed kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] Mar 26 13:49:56 ed kernel: ppa: Version 2.07 (for Linux 2.4.x) Mar 26 13:49:56 ed kernel: end_request: I/O error, dev fd0, sector 0 Mar 26 13:50:29 ed syslog-ng[2094]: last message repeated 3 times Mar 26 13:53:49 ed sudo: edearl : TTY=pts/6 ; PWD=/home/edearl ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - Mar 26 13:53:49 ed sudo: edearl : TTY=pts/6 ; PWD=/home/edearl ; USER=root ; COMMAND=/opt/kde3/bin/kdesu_stub - ------------------------------------------------------------------------------- 7. XFree86 ------------------------------------------------------------------------------- 3.1 sysp - /usr/sbin/sysp -s mouse Mouse0 => Protocol : explorerps/2 Mouse0 => Device : /dev/input/mice Mouse0 => Buttons : 7 Mouse0 => Wheel : 1 Mouse0 => Emulate : 0 Mouse0 => Name : Logitech Marble Mouse (4-button) Mouse0 => VendorID : 0x046d Mouse0 => DeviceID : 0xc408 Mouse0 => Profile : Mouse0 => RealDevice : /dev/input/by-id/usb-Logitech_USB_Trackball-mouse Mouse0 => NutShell : 0 sysp - /usr/sbin/sysp -c Chip: 0 is -> NVidia GeForce 7800 GS AGP 01:00:0 0x10de 0x00f5 AGP nv sysp - /usr/sbin/sysp -s keyboard Keyboard0 => XkbModel : microsoftpro Keyboard0 => XkbLayout : us Keyboard0 => Name : AT Translated Set 2 keyboard Keyboard0 => VendorID : 0x0211 Keyboard0 => DeviceID : 0x0001 Keyboard0 => Profile : Keyboard0 => RealDevice : /dev/input/event0 ------------------------------------------------------------------------------- 3.2 XF Links --- xinit --- ls: cannot access /usr/X11R6/bin/xinit: No such file or directory --- /dev/video --- ls: cannot access /dev/video*: No such file or directory --- /dev/mouse --- ls: cannot access /dev/mouse*: No such file or directory ------------------------------------------------------------------------------- 3.3 xf86config4 - /etc/X11/xorg.conf Section "Files" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/URW" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/PEX" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/latin2/misc:unscaled" FontPath "/usr/share/fonts/latin2/75dpi:unscaled" FontPath "/usr/share/fonts/latin2/100dpi:unscaled" FontPath "/usr/share/fonts/latin2/Type1" FontPath "/usr/share/fonts/latin7/75dpi:unscaled" FontPath "/usr/share/fonts/baekmuk:unscaled" FontPath "/usr/share/fonts/japanese:unscaled" FontPath "/usr/share/fonts/kwintv" FontPath "/usr/share/fonts/truetype" FontPath "/usr/share/fonts/uni:unscaled" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/ucs/misc:unscaled" FontPath "/usr/share/fonts/ucs/75dpi:unscaled" FontPath "/usr/share/fonts/ucs/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/misc:unscaled" FontPath "/usr/share/fonts/hellas/75dpi:unscaled" FontPath "/usr/share/fonts/hellas/100dpi:unscaled" FontPath "/usr/share/fonts/hellas/Type1" FontPath "/usr/share/fonts/misc/sgi:unscaled" FontPath "/usr/share/fonts/xtest" FontPath "/opt/kde3/share/fonts" FontPath "unix/:7100" InputDevices "/dev/gpmdata" InputDevices "/dev/input/mice" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "on" EndSection Section "Module" Load "glx" Load "type1" Load "extmod" Load "dbe" Load "freetype" Load "v4l" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "pc104" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "7" Option "Device" "/dev/input/mice" Option "Name" "Logitech USB Trackball" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" DisplaySize 474 296 HorizSync 29-81 Identifier "Monitor[0]" ModelName "AL2223W" Option "DPMS" VendorName "ACR" VertRefresh 43-75 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1920x1200" 211.22 1920 2056 2264 2608 1200 1201 1204 1246 Modeline "1900x1200" 208.63 1904 2032 2240 2576 1200 1201 1204 1246 Modeline "1600x1200" 176.23 1600 1712 1888 2176 1200 1201 1204 1246 Modeline "1680x1050" 181.61 1680 1792 1976 2272 1050 1051 1054 1095 Modeline "1600x1024" 174.46 1600 1712 1888 2176 1024 1025 1028 1069 Modeline "1600x1024" 161.18 1600 1704 1880 2160 1024 1025 1028 1066 Modeline "1600x1024" 149.25 1600 1704 1880 2160 1024 1025 1028 1063 Modeline "1600x1024" 136.36 1600 1704 1872 2144 1024 1025 1028 1060 Modeline "1600x1000" 169.13 1600 1704 1880 2160 1000 1001 1004 1044 Modeline "1600x1000" 157.40 1600 1704 1880 2160 1000 1001 1004 1041 Modeline "1600x1000" 144.66 1600 1704 1872 2144 1000 1001 1004 1038 Modeline "1600x1000" 133.14 1600 1704 1872 2144 1000 1001 1004 1035 Modeline "1400x1050" 151.56 1400 1496 1648 1896 1050 1051 1054 1095 Modeline "1280x1024" 138.54 1280 1368 1504 1728 1024 1025 1028 1069 Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 Modeline "1280x1024" 119.40 1280 1368 1504 1728 1024 1025 1028 1063 Modeline "1280x1024" 108.88 1280 1360 1496 1712 1024 1025 1028 1060 Modeline "1440x900" 136.49 1440 1536 1688 1936 900 901 904 940 Modeline "1440x900" 126.98 1440 1536 1688 1936 900 901 904 937 Modeline "1440x900" 116.56 1440 1528 1680 1920 900 901 904 934 Modeline "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932 Modeline "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 Modeline "1280x960" 120.84 1280 1368 1504 1728 960 961 964 999 Modeline "1280x960" 110.95 1280 1360 1496 1712 960 961 964 997 Modeline "1280x960" 102.10 1280 1360 1496 1712 960 961 964 994 Modeline "1366x768" 110.19 1368 1456 1600 1832 768 769 772 802 Modeline "1366x768" 101.70 1368 1448 1592 1816 768 769 772 800 Modeline "1366x768" 93.37 1368 1440 1584 1800 768 769 772 798 Modeline "1366x768" 85.86 1368 1440 1584 1800 768 769 772 795 Modeline "1280x800" 107.21 1280 1360 1496 1712 800 801 804 835 Modeline "1280x800" 98.89 1280 1352 1488 1696 800 801 804 833 Modeline "1280x800" 91.61 1280 1352 1488 1696 800 801 804 831 Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828 Modeline "1152x864" 104.99 1152 1224 1352 1552 864 865 868 902 Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900 Modeline "1152x864" 89.56 1152 1224 1344 1536 864 865 868 897 Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 Modeline "1280x768" 102.98 1280 1360 1496 1712 768 769 772 802 Modeline "1280x768" 94.98 1280 1352 1488 1696 768 769 772 800 Modeline "1280x768" 87.97 1280 1352 1488 1696 768 769 772 798 Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795 Modeline "1024x768" 81.80 1024 1080 1192 1360 768 769 772 802 Modeline "1024x768" 76.16 1024 1080 1192 1360 768 769 772 800 Modeline "1024x768" 69.71 1024 1080 1184 1344 768 769 772 798 Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795 Modeline "1280x600" 79.00 1280 1344 1480 1680 600 601 604 627 Modeline "1280x600" 72.80 1280 1336 1472 1664 600 601 604 625 Modeline "1280x600" 66.74 1280 1336 1464 1648 600 601 604 623 Modeline "1280x600" 61.50 1280 1336 1464 1648 600 601 604 622 Modeline "1024x600" 63.20 1024 1080 1184 1344 600 601 604 627 Modeline "1024x600" 58.10 1024 1072 1176 1328 600 601 604 625 Modeline "1024x600" 53.78 1024 1072 1176 1328 600 601 604 623 Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 Modeline "800x600" 48.91 800 840 920 1040 600 601 604 627 Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 Modeline "800x600" 42.11 800 840 920 1040 600 601 604 623 Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622 Modeline "768x576" 45.51 768 808 888 1008 576 577 580 602 Modeline "768x576" 41.66 768 800 880 992 576 577 580 600 Modeline "768x576" 38.56 768 800 880 992 576 577 580 598 Modeline "768x576" 34.96 768 792 872 976 576 577 580 597 Modeline "640x480" 30.72 640 664 728 816 480 481 484 502 Modeline "640x480" 28.56 640 664 728 816 480 481 484 500 Modeline "640x480" 25.95 640 656 720 800 480 481 484 499 Modeline "640x480" 23.86 640 656 720 800 480 481 484 497 EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1920x1200" "1900x1200" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1440x900" "1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1920x1200" "1900x1200" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1440x900" "1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1920x1200" "1900x1200" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1440x900" "1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1920x1200" "1900x1200" "1600x1200" "1680x1050" "1600x1024" "1600x1000" "1400x1050" "1280x1024" "1440x900" "1280x960" "1366x768" "1280x800" "1152x864" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "Device" BoardName "GeForce 7800 GS AGP" BusID "1:0:0" Driver "nv" Identifier "Device[0]" Screen 0 VendorName "NVidia" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Option "Clone" "off" Option "Xinerama" "off" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection Section "Extensions" EndSection ------------------------------------------------------------------------------- 3.4 3Ddiag - /usr/bin/3Ddiag 3Ddiag version 0.740 Verifying 3D configuration: Using 3dinfo ************************************************************ Verifying 3D configuration for 3D board "nVidia Corporation GeForce 7800 GS AGP (10de@00f5)": Verifying driver installation: nvidia ... failed! ======================= !!! WARNING !!! ======================== Due to license issues only a Dummy Nvidia 2D/3D driver with Software 3D/OpenGL rendering is provided. Please download the official 2D/3D Nvidia driver from the nVidia webserver (http://www.nvidia.com), if you want to use 3D hardware accelerated 3D/OpenGL. ================================================================ Tests for X.Org configuration: Config File /etc/X11/xorg.conf ... done. Driver ... failed! ================================================================ 3D Hardware acceleration is not used. To use 3D Hardware acceleration please specify the entry Driver "nvidia" in the Section "Device" of your /etc/X11/xorg.conf. ================================================================ Extensions ... done. Options ... done. Checking GL/GLU/glut runtime configuration: GL/GLU ... done (package Mesa) glut ... done (package freeglut) ------------------------------------------------------------------------------- 3.5 /usr/lib/libGL* ------------------------------------------------------------------------------- lrwxrwxrwx 1 root root 10 Mar 12 13:27 /usr/lib/libGL.so -> libGL.so.1 lrwxrwxrwx 1 root root 12 Mar 12 13:27 /usr/lib/libGL.so.1 -> libGL.so.1.2 -rwxr-xr-x 1 root root 391344 Sep 21 2007 /usr/lib/libGL.so.1.2 lrwxrwxrwx 1 root root 11 Mar 12 15:20 /usr/lib/libGLU.so -> libGLU.so.1 lrwxrwxrwx 1 root root 20 Mar 12 13:27 /usr/lib/libGLU.so.1 -> libGLU.so.1.3.070001 -rwxr-xr-x 1 root root 495800 Sep 21 2007 /usr/lib/libGLU.so.1.3.070001 lrwxrwxrwx 1 root root 16 Mar 12 13:27 /usr/lib/libGLcore.so.1 -> libGLcore.so.1.0 -rwxr-xr-x 1 root root 4912 Sep 21 2007 /usr/lib/libGLcore.so.1.0 ------------------------------------------------------------------------------- 3.6 Framebuffer - /usr/sbin/hwinfo --framebuffer 02: None 00.0: 11001 VESA Framebuffer [Created at bios.447] Unique ID: rdCR.Y33aj5zw8bF Hardware Class: framebuffer Model: "NVIDIA G71 Board - p492h2 " Vendor: "NVIDIA Corporation" Device: "G71 Board - p492h2 " SubVendor: "NVIDIA" SubDevice: Revision: "Chip Rev" Memory Size: 256 MB Memory Range: 0xe0000000-0xefffffff (rw) Mode 0x0300: 640x400 (+640), 8 bits Mode 0x0301: 640x480 (+640), 8 bits Mode 0x0303: 800x600 (+800), 8 bits Mode 0x0305: 1024x768 (+1024), 8 bits Mode 0x0307: 1280x1024 (+1280), 8 bits Mode 0x030e: 320x200 (+640), 16 bits Mode 0x030f: 320x200 (+1280), 24 bits Mode 0x0311: 640x480 (+1280), 16 bits Mode 0x0312: 640x480 (+2560), 24 bits Mode 0x0314: 800x600 (+1600), 16 bits Mode 0x0315: 800x600 (+3200), 24 bits Mode 0x0317: 1024x768 (+2048), 16 bits Mode 0x0318: 1024x768 (+4096), 24 bits Mode 0x031a: 1280x1024 (+2560), 16 bits Mode 0x031b: 1280x1024 (+5120), 24 bits Mode 0x0330: 320x200 (+320), 8 bits Mode 0x0331: 320x400 (+320), 8 bits Mode 0x0332: 320x400 (+640), 16 bits Mode 0x0333: 320x400 (+1280), 24 bits Mode 0x0334: 320x240 (+320), 8 bits Mode 0x0335: 320x240 (+640), 16 bits Mode 0x0336: 320x240 (+1280), 24 bits Mode 0x033d: 640x400 (+1280), 16 bits Mode 0x033e: 640x400 (+2560), 24 bits Config Status: cfg=no, avail=yes, need=no, active=unknown ------------------------------------------------------------------------------- 3.7 /var/log/XFree86.?.log ------------------------------------------------------------------------------- no /var/log/XFree86.0.log exists no /var/log/XFree86.1.log exists ------------------------------------------------------------------------------- 3.8 SaX.log - /var/log/SaX.log /************* SaX2 log : SaX2 version 8.1 - SVN Release: 1.49 2003/03/17 ************** SVN RELEASE : 1443 : DESCRIPTION : X11 configuration log file to collect information : about detection, startup and configuration. : There are three parts of logging: : --- : 1) INIT ( detection, 3D ) : 2) STARTUP ( xorg.conf, X11 log, glxinfo ) : 3) CONFIG ( config actions ) : --- : VERSION : SaX2 compiled for: [openSUSE 10.3 (i586)] PARAMETER : no parameter(s) given : LOG DATE : Wed Mar 26 13:53:58 CDT 2008 *************/ ============================ Framebuffer Info: ---------------------------- Framebuffer is active 26-Mar 13:53:59 Startup... 26-Mar 13:53:59 [ Startup on already running Server: :0.0 -> grant ] 26-Mar 13:53:59 Checksum of installed configuration is invalid ! 26-Mar 13:54:00 Imported: Card 26-Mar 13:54:00 Imported: Desktop 26-Mar 13:54:01 Imported: Pointers 26-Mar 13:54:01 Imported: Keyboard 26-Mar 13:54:01 Imported: Layout 26-Mar 13:54:02 Imported: Path 26-Mar 13:54:02 Imported: Extensions 26-Mar 13:54:05 SCCMonitorDisplay::using DDC reference resolutions 26-Mar 13:54:05 *** not yet handled: Pad Properties on display 0 ------------------------------------------------------------------------------- 3.9 ~/.X.err ------------------------------------------------------------------------------- no /root/.X.err exists ------------------------------------------------------------------------------- 3.10 ~/.xsession-errors ------------------------------------------------------------------------------- /root/.xsession-errors /etc/X11/xim: Checking whether an input method should be started. /etc/X11/xim: user environment variable LANG=POSIX /etc/X11/xim: user environment variable LC_CTYPE=en_US.UTF-8 sourcing /etc/sysconfig/language to get the value of INPUT_METHOD INPUT_METHOD is not set or empty (no user selected input method). Trying to start a default input method for the locale en_US.UTF-8 ... There is no default input method for the current locale. startkde: Starting up... kbuildsycoca running... QObject::connect: No such signal Kicker::settingsChanged(SettingsCategory) QObject::connect: (sender name: 'kicker') QObject::connect: (receiver name: 'animtt') JACK tmpdir identified as [/dev/shm] akode: Guessed format: xiph beagled will not run as root. Kerry will quit now because of that. KNotify::playTimeout You can not run beagle as root. Beagle is designed to run from your own user account. If you want to create multiuser or system-wide indexes, use the beagle-build-index tool. You can override this setting using the beagle-config or beagle-settings tools. KNotify::playTimeout KNotify::playTimeout KNotify::playTimeout KNotify::playTimeout KNotify::playTimeout KNotify::playTimeout KNotify::playTimeout QClipboard::setData: Cannot set X11 selection owner for CLIPBOARD kbuildsycoca running... X Error: BadWindow (invalid Window parameter) 3 Major opcode: 19 Minor opcode: 0 Resource id: 0x2200079 (K3bDevice::HalConnection) initializing HAL >= 0.5 Mapping udi /org/freedesktop/Hal/devices/storage_model_CD_ROM_GCR_8480B to device /dev/sr1 Mapping udi /org/freedesktop/Hal/devices/storage_model_LTR_48126S to device /dev/sr0 /dev/sr1 resolved to /dev/sr1 /dev/sr1 is block device (1) /dev/sr1 seems to be cdrom bus: 0, id: 1, lun: 0 (K3bDevice::Device) /dev/sr1: init() (K3bDevice::ScsiCommand) failed: command: MODE SENSE (5a) errorcode: 70 sense key: ILLEGAL REQUEST (5) asc: 24 ascq: 0 (K3bDevice::Device) /dev/sr1: MODE SENSE length det failed. (K3bDevice::ScsiCommand) failed: command: MODE SENSE (5a) errorcode: 70 sense key: ILLEGAL REQUEST (5) asc: 24 ascq: 0 (K3bDevice::Device) /dev/sr1: MODE SENSE with real length 65535 failed. (K3bDevice::Device) /dev/sr1: modeSense 0x05 failed! (K3bDevice::Device) /dev/sr1: Cannot check write modes. (K3bDevice::ScsiCommand) failed: command: MODE SENSE (5a) errorcode: 70 sense key: ILLEGAL REQUEST (5) asc: 24 ascq: 0 (K3bDevice::Device) /dev/sr1: MODE SENSE length det failed. (K3bDevice::ScsiCommand) failed: command: MODE SENSE (5a) errorcode: 70 sense key: ILLEGAL REQUEST (5) asc: 24 ascq: 0 (K3bDevice::Device) /dev/sr1: MODE SENSE with real length 65535 failed. /dev/sr0 resolved to /dev/sr0 /dev/sr0 is block device (0) /dev/sr0 seems to be cdrom bus: 0, id: 0, lun: 0 (K3bDevice::Device) /dev/sr0: init() (K3bDevice::Device) /dev/sr0 feature: CD Mastering (K3bDevice::Device) /dev/sr0 feature: CD Track At Once (K3bDevice::Device) /dev/sr0 unknown profile: 2 (K3bDevice::Device) /dev/sr0: dataLen: 60 (K3bDevice::Device) /dev/sr0: checking for TAO (K3bDevice::Device) /dev/sr0: checking for SAO (K3bDevice::Device) /dev/sr0: checking for SAO_R96P (K3bDevice::Device) /dev/sr0: checking for SAO_R96R (K3bDevice::Device) /dev/sr0: checking for RAW_R16 (K3bDevice::Device) /dev/sr0: checking for RAW_R96P (K3bDevice::Device) /dev/sr0: checking for RAW_R96R (K3bDevice::ScsiCommand) failed: command: GET PERFORMANCE (ac) errorcode: 70 sense key: NOT READY (2) asc: 3a ascq: 0 (K3bDevice::Device) /dev/sr0: GET PERFORMANCE length det failed. (K3bDevice::Device) /dev/sr0: Number of supported write speeds via 2A: 10 (K3bDevice::Device) /dev/sr0 : 8448 KB/s (K3bDevice::Device) /dev/sr0 : 7040 KB/s (K3bDevice::Device) /dev/sr0 : 5632 KB/s (K3bDevice::Device) /dev/sr0 : 4224 KB/s (K3bDevice::Device) /dev/sr0 : 2816 KB/s (K3bDevice::Device) /dev/sr0 : 2112 KB/s (K3bDevice::Device) /dev/sr0 : 1760 KB/s (K3bDevice::Device) /dev/sr0 : 1408 KB/s (K3bDevice::Device) /dev/sr0 Invalid DVD speed: 704 KB/s (K3bDevice::DeviceManager) setting current write speed of device /dev/sr0 to 0 Could not resolve /dev/hdb /dev/hdb resolved to /dev/hdb (K3bDevice::Device) could not open device /dev/hdb for reading (No such file or directory) could not open device /dev/hdb (No such file or directory) Could not resolve /dev/hda /dev/hda resolved to /dev/hda (K3bDevice::Device) could not open device /dev/hda for reading (No such file or directory) could not open device /dev/hda (No such file or directory) /dev/sr1 resolved to /dev/sr1 (K3bDevice::DeviceManager) dev /dev/sr1 already found /dev/sr0 resolved to /dev/sr0 (K3bDevice::DeviceManager) dev /dev/sr0 already found (K3bDevice::DeviceManager) found config entry for devicetype: HL-DT-ST CD-ROM GCR-8480B (K3bDevice::DeviceManager) found config entry for devicetype: LITE-ON LTR-48126S Devices: ------------------------------ Blockdevice: /dev/sr1 Generic device: Vendor: HL-DT-ST Description: CD-ROM GCR-8480B Version: 1.03 Write speed: 0 Profiles: CD-ROM Read Cap: CD-ROM Write Cap: Error Writing modes: None Reader aliases: /dev/sr1 ------------------------------ Blockdevice: /dev/sr0 Generic device: Vendor: LITE-ON Description: LTR-48126S Version: 2QS5 Write speed: 8448 Profiles: CD-ROM, CD-R, CD-RW Read Cap: CD-ROM, CD-R, CD-RW Write Cap: CD-R, CD-RW Writing modes: SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R Reader aliases: /dev/sr0 ------------------------------ X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 Minor opcode: 0 Resource id: 0x220054d X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 Minor opcode: 0 Resource id: 0x220054d X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 Minor opcode: 0 Resource id: 0x220054d X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 Minor opcode: 0 Resource id: 0x220054d X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 Minor opcode: 0 Resource id: 0x220054d X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 Minor opcode: 0 Resource id: 0x220054d (K3bDevice::DeviceManager) request for empty device! JACK tmpdir identified as [/dev/shm] akode: Guessed format: xiph KNotify::playTimeout KNotify::playTimeout X Error: BadWindow (invalid Window parameter) 3 Major opcode: 7 Minor opcode: 0 Resource id: 0x2800008 X Error: BadWindow (invalid Window parameter) 3 Major opcode: 6 Minor opcode: 0 Resource id: 0x2800008 X Error: BadWindow (invalid Window parameter) 3 Major opcode: 7 Minor opcode: 0 Resource id: 0x3000008 X Error: BadWindow (invalid Window parameter) 3 Major opcode: 6 Minor opcode: 0 Resource id: 0x3000008 X Error: BadWindow (invalid Window parameter) 3 Major opcode: 7 Minor opcode: 0 Resource id: 0x2a00008 X Error: BadWindow (invalid Window parameter) 3 Major opcode: 6 Minor opcode: 0 Resource id: 0x2a00008 X Error: BadWindow (invalid Window parameter) 3 Major opcode: 7 Minor opcode: 0 Resource id: 0x1200046 X Error: BadWindow (invalid Window parameter) 3 Major opcode: 6 Minor opcode: 0 Resource id: 0x1200046 org.freedesktop.NetworkManagerInfo already owned. WARNING: deleting stale lockfile /root/.kde/share/config/kdeglobals.lock ICE default IO error handler doing an exit(), pid = 8354, errno = 11 startkde: Shutting down... warning: leaving MCOP Dispatcher and still 8 object references alive. - Arts::SampleStorage - Arts::Synth_MULTI_ADD - Arts::Synth_MULTI_ADD - Arts::Synth_PLAY - Arts::StereoVolumeControl - Arts::StereoEffectStack - Arts::Synth_BUS_DOWNLINK - Arts::SoundServerV2 warning: leaving MCOP Dispatcher and still 75 types alive. sound server terminated klauncher: Exiting on signal 1 startkde: Running shutdown scripts... unset SSH_AUTH_SOCK; unset SSH_AGENT_PID; echo Agent pid 7999 killed; /opt/kde3/shutdown/stopkde.suse.sh: line 10: kill: (7169) - No such process startkde: Done. ------------------------------------------------------------------------------- 3.11 ~/ServerLog no /root/ServerLog exists ------------------------------------------------------------------------------- 3.12 ~/StartLog no /root/StartLog exists ------------------------------------------------------------------------------- 3.13 xdpyinfo - /usr/X11R6/bin/xdpyinfo command /usr/X11R6/bin/xdpyinfo not found ------------------------------------------------------------------------------- ##Y2support-/tmp/siga/siga.txt-- -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.