https://bugzilla.novell.com/show_bug.cgi?id=355156 Summary: dummy device on ICH7 make booting nearly hang Product: openSUSE 11.0 Version: Alpha 1 Platform: i686 OS/Version: openSUSE 11.0 Status: NEW Severity: Normal Priority: P5 - None Component: Kernel AssignedTo: kernel-maintainers@forge.provo.novell.com ReportedBy: Joachim.Reichelt@helmholtz-hzi.de QAContact: qa@suse.de Found By: Beta-Customer booting is dog slow, as the kernel wants to check a dummy device: the drive is: pci-0000:00:1f.2-scsi-1:0:0:0 /proc/scsi/scsi: Host: scsi8 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Config Disk Rev: RGL1 Type: Direct-Access ANSI SCSI revision: 05 in /var/log/boot.msg: <5>sd 7:0:1:0: [sdd] Attached SCSI disk <5>sd 8:0:0:0: [sde] 640 512-byte hardware sectors (0 MB) <5>sd 8:0:0:0: [sde] Write Protect is off <7>sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00 <5>sd 8:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA <5>sd 8:0:0:0: [sde] 640 512-byte hardware sectors (0 MB) <5>sd 8:0:0:0: [sde] Write Protect is off <7>sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00 <5>sd 8:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA <6> sde:<3>ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen <3>ata8.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in <4> res 50/01:01:01:00:00/00:00:00:00:00/00 Emask 0x202 (HSM violation) <3>ata8.00: status: { DRDY } <6>ata8: soft resetting link <4>ata8.00: device is on DMA blacklist, disabling DMA <6>ata8.00: configured for PIO4 <6>ata8: EH complete <3>ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen <3>ata8.00: cmd c4/00:08:00:00:00/00:00:00:00:00/e0 tag 0 pio 4096 in <4> res 40/00:01:01:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) <3>ata8.00: status: { DRDY } <6>ata8: soft resetting link <4>ata8.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80) <3>ata8.00: revalidation failed (errno=-5) <4>ata8: failed to recover some devices, retrying in 5 secs <6>ata8: soft resetting link <4>ata8: port is slow to respond, please be patient (Status 0xd0) <3>ata8: SRST failed (errno=-16) <6>ata8: soft resetting link <4>ata8: port is slow to respond, please be patient (Status 0xd0) <3>ata8: SRST failed (errno=-16) <6>ata8: soft resetting link <4>ata8: port is slow to respond, please be patient (Status 0xd0) <3>ata8: SRST failed (errno=-16) <6>ata8: soft resetting link <3>ata8: SRST failed (errno=-16) <3>ata8: reset failed, giving up <4>ata8.00: disabled <6>ata8: EH complete <6>sd 8:0:0:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK <4>end_request: I/O error, dev sde, sector 0 <3>Buffer I/O error on device sde, logical block 0 <5>sd 8:0:0:0: [sde] READ CAPACITY failed <6>sd 8:0:0:0: [sde] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK <5>sd 8:0:0:0: [sde] Sense not available. <5>sd 8:0:0:0: [sde] Write Protect is off <7>sd 8:0:0:0: [sde] Mode Sense: 00 00 00 00 <3>sd 8:0:0:0: [sde] Asking for cache data failed <3>sd 8:0:0:0: [sde] Assuming drive cache: write through <3>Buffer I/O error on device sde, logical block 0 <3>Buffer I/O error on device sde, logical block 0 <3>Buffer I/O error on device sde, logical block 0 <2>ldm_validate_partition_table(): Disk read failed. <3>Buffer I/O error on device sde, logical block 0 <3>Buffer I/O error on device sde, logical block 0 <3>Buffer I/O error on device sde, logical block 0 <3>Buffer I/O error on device sde, logical block 0 <3>Buffer I/O error on device sde, logical block 0 .. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.