https://bugzilla.novell.com/show_bug.cgi?id=335638#c1 Summary: boot from installer usb stick hangs: "/init: error while loading share" Product: openSUSE 11.0 Version: unspecified Platform: x86-64 OS/Version: openSUSE 11.0 Status: NEW Severity: Critical Priority: P5 - None Component: Installation AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: harbaugh@ncifcrf.gov QAContact: jsrain@novell.com Found By: Beta-Customer attempt to boot installer from usb stick hangs after "Freeing unused kernel memory": . . . mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 NET: Registered protocol family 1 Freeing unused kernel memory: 324k freed /init: error whiKernel panic - not syncing: Attempted to kill init! le loading share Here is the complete boot log: Available boot options: harddisk - Boot from Harddisk (this is default) linux - Installation serial - Installation via Serial manual=2 msline - Installation via Serial linemode=1 (for dumb terminal) manual=2 manual - Mnstallation - ACPI Disabled nailsafe - Installation - Safe Settings rescue - Rescue System firmware - Firmware Test memtest - Memory Test 'noacpi', 'nolapic', or 'failsafe' may be necessary on some tricky hardware. Have a lot of fun... boot: msline Linux version 2.6.23.1-6-default (geeko@buildhost) (gcc version 4.2.2 (SUSE Linux)) #1 SMP 2007/10/19 20:37:48 UTC Command line: initrd=initrd linemode=1 console=ttyS1,115200n8 manual=2 splash=silent showopts BOOT_IMAGE=linux BIOS-provided physical RAM map:........... BIOS-e820: 0000000000000000 - 0000000000098c00 (usable)........................ BIOS-e820: 0000000000098c00 - 00000000000a0000 (reserved)...................... BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cff60000 (usable) BIOS-e820: 00000000cff60000 - 00000000cff69000 (ACPI data) BIOS-e820: 00000000cff69000 - 00000000cff80000 (ACPI NVS) BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) end_pfn_map = 2293760 DMI present. ACPI: RSDP 000F5E80, 0014 (r0 PTLTD ) ACPI: RSDT CFF63603, 003C (r1 PTLTD RSDT 6040000 LTP 0) ACPI: FACP CFF68E48, 0074 (r1 INTEL TUMWATER 6040000 PTL 3) ACPI: DSDT CFF64A44, 4404 (r1 Intel BLAKFORD 6040000 MSFT 100000E) ACPI: FACS CFF69FC0, 0040 ACPI: APIC CFF68EBC, 0090 (r1 PTLTD APIC 6040000 LTP 0) ACPI: MCFG CFF68F4C, 003C (r1 PTLTD MCFG 6040000 LTP 0) ACPI: BOOT CFF68F88, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SPCR CFF68FB0, 0050 (r1 PTLTD $UCRTBL$ 6040000 PTL 1) ACPI: SSDT CFF6363F, 1405 (r1 PmRef CpuPm 3000 INTL 20050228) No NUMA configuration found Faking a node at 0000000000000000-0000000230000000 Bootmem setup node 0 0000000000000000-0000000230000000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2293760 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 152 0: 256 -> 851808 0: 1048576 -> 2293760 ACPI: PM-Timer IO Port: 0x1008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 3, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 0000000000098000 - 0000000000099000 swsusp: Registered nosave memory region: 0000000000099000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000 swsusp: Registered nosave memory region: 00000000000d2000 - 00000000000d4000 swsusp: Registered nosave memory region: 00000000000d4000 - 00000000000e4000 swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 swsusp: Registered nosave memory region: 00000000cff60000 - 00000000cff69000 swsusp: Registered nosave memory region: 00000000cff69000 - 00000000cff80000 swsusp: Registered nosave memory region: 00000000cff80000 - 00000000d0000000 swsusp: Registered nosave memory region: 00000000d0000000 - 00000000e0000000 swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000 swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000 swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec10000 swsusp: Registered nosave memory region: 00000000fec10000 - 00000000fee00000 swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee01000 swsusp: Registered nosave memory region: 00000000fee01000 - 00000000ff000000 swsusp: Registered nosave memory region: 00000000ff000000 - 0000000100000000 Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) SMP: Allowing 4 CPUs, 0 hotplug CPUs PERCPU: Allocating 47464 bytes of per cpu data Built 1 zonelists in Zone order. Total pages: 2064094 Policy zone: Normal Kernel command line: initrd=initrd linemode=1 console=ttyS1,115200n8 manual=2 splash=silent showopts BOOT_IMAGE=linux bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Detected 2000.071 MHz processor. Console: colour VGA+ 80x25 console [ttyS1] enabled Checking aperture... PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x107b000 - 0x507b000 Memory: 8175044k/9175040k available (2087k kernel code, 212508k reserved, 1036k data, 324k init) Calibrating delay using timer specific routine.. 4003.22 BogoMIPS (lpj=8006442) Security Framework v1.0.0 initialized Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code Unpacking initramfs... done Freeing initrd memory: 14883k freed ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 423 Objects with 47 Devices 131 Methods 22 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 43 Objects with 0 Devices 16 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful Using local APIC timer interrupts. result 20834075 Detected 20.834 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 4000.28 BogoMIPS (lpj=8000567) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. SMP alternatives: switching to SMP code Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 4000.23 BogoMIPS (lpj=8000466) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#2]: passed. SMP alternatives: switching to SMP code Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 4000.42 BogoMIPS (lpj=8000858) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5130 @ 2.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - e0afffff PCI: No mmconfig possible on device 0b:01 PCI: No mmconfig possible on device 0b:02 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:.......................................................... Initialized 17/22 Regions 0/0 Fields 35/35 Buffers 6/22 Packages (475 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:. Executed 1 _INI methods requiring 0 _STA executions (examined 57 objects) ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved pnp: 00:01: iomem range 0xfee00000-0xfee0ffff could not be reserved pnp: 00:01: iomem range 0xfec80000-0xfec80fff has been reserved pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved PCI: Bridge: 0000:03:00.0 IO window: 2000-2fff MEM window: d8200000-d82fffff PREFETCH window: d8000000-d80fffff PCI: Bridge: 0000:03:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: 2000-2fff MEM window: d8200000-d82fffff PREFETCH window: d8000000-d80fffff PCI: Bridge: 0000:02:02.0 IO window: 3000-3fff MEM window: d8300000-d83fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: 2000-3fff MEM window: d8200000-d83fffff PREFETCH window: d8000000-d80fffff PCI: Bridge: 0000:01:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: 2000-3fff MEM window: d8100000-d83fffff PREFETCH window: d8000000-d80fffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: d8400000-d84fffff PREFETCH window: d0000000-d7ffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 1048576 (order: 12, 25165824 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 1048576 bind 65536) TCP reno registered Simple Boot Flag at 0x38 set to 0x1 audit: initializing netlink socket (disabled) audit(1193056709.928:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability assign_interrupt_mode Found MSI capability Non-volatile memory driver v1.2 Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 NET: Registered protocol family 1 Freeing unused kernel memory: 324k freed /init: error whiKernel panic - not syncing: Attempted to kill init! le loading share -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.