Mailinglist Archive: opensuse-bugs (15136 mails)
| < Previous | Next > |
[Bug 328934] New: ext3 fs kernel bug output in /var/log/messages
- From: bugzilla_noreply@xxxxxxxxxx
- Date: Thu, 27 Sep 2007 07:54:37 -0600 (MDT)
- Message-id: <bug-328934-21960@xxxxxxxxxxxxxxxxxxxxxxxxx/>
https://bugzilla.novell.com/show_bug.cgi?id=328934#c1
Summary: ext3 fs kernel bug output in /var/log/messages
Product: openSUSE 10.2
Version: Final
Platform: i586
OS/Version: openSUSE 10.2
Status: NEW
Severity: Critical
Priority: P5 - None
Component: Kernel
AssignedTo: kernel-maintainers@xxxxxxxxxxxxxxxxxxxxxx
ReportedBy: reitenbach@xxxxxxxxxxx
QAContact: qa@xxxxxxx
Found By: Customer
The nfs client started to hang on an ls on imported file systems, therefore the
client was rebooted. after a reboot, the client was unable to mount nfs shares
again, for the following reason:
srv:~ # mount /import/docs
nfs server reported tcp not available, falling back to udp
Using NFS over UDP can cause data corruption.
Please refer to the WARNINGS section of the nfs(5) manual page.
mount: nfsserver:/raid/docs: can't read superblock
Therfore a quick look into the messages file on the nfs server revealed the
following:
iotype_init(92) register nullio
ioctl(301) invalid ioctl cmd 48086904
iSCSI Enterprise Target Software - version 0.4.15
iotype_init(92) register fileio
iotype_init(92) register blockio
iotype_init(92) register nullio
ioctl(301) invalid ioctl cmd 48086904
ioctl(301) invalid ioctl cmd c06c690d
ioctl(301) invalid ioctl cmd c06c690d
iSCSI Enterprise Target Software - version 0.4.15
iotype_init(92) register fileio
iotype_init(92) register blockio
iotype_init(92) register nullio
ioctl(301) invalid ioctl cmd 48086904
ioctl(301) invalid ioctl cmd c06c690d
iSCSI Enterprise Target Software - version 0.4.15
iotype_init(92) register fileio
iotype_init(92) register blockio
iotype_init(92) register nullio
ioctl(301) invalid ioctl cmd 48086904
iSCSI Enterprise Target Software - version 0.4.13
iotype_init(90) register fileio
iotype_init(90) register nullio
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
iSCSI Enterprise Target Software - version 0.4.13
iotype_init(90) register fileio
iotype_init(90) register nullio
iSCSI Enterprise Target Software - version 0.4.13
iotype_init(90) register fileio
iotype_init(90) register nullio
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
Assertion failure in dx_probe() at fs/ext3/namei.c:384: "dx_get_limit(entries)
== dx_root_limit(dir, root->info.info_length)"
Sep 27 13:29:28 ogo kernel: ------------[ cut here ]------------
Sep 27 13:29:28 ogo kernel: kernel BUG at fs/ext3/namei.c:384!
Sep 27 13:29:28 ogo kernel: invalid opcode: 0000 [#1]
Sep 27 13:29:28 ogo kernel: SMP
Sep 27 13:29:28 ogo kernel: last sysfs file: /block/sda/size
Sep 27 13:29:28 ogo kernel: Modules linked in: iscsi_trgt nls_utf8 nfsd
exportfs lockd nfs_acl sunrpc crc32c libcrc32c joydev st ide_cd iptable_filter
ip_tables x_tables af_packet reiserfs hfs vfat fat ipv6 button battery ac loop
dm_mod e1000 uhci_hcd shpchp usbcore i2c_i801 e7xxx_edac edac_mc i2c_core
pci_hotplug ext3 mbcache jbd mptspi mptscsih mptbase scsi_transport_spi gdth
piix sg edd fan sr_mod cdrom ata_piix libata thermal processor sd_mod scsi_mod
ide_disk ide_core
Sep 27 13:29:28 ogo kernel: CPU: 3
Sep 27 13:29:28 ogo kernel: EIP: 0060:[<f8922fc7>] Tainted: G U VLI
Sep 27 13:29:28 ogo kernel: EFLAGS: 00010296 (2.6.18.2-34-default #1)
Sep 27 13:29:28 ogo kernel: EIP is at dx_probe+0x174/0x2d8 [ext3]
Sep 27 13:29:28 ogo kernel: eax: 00000081 ebx: f768caac ecx: 00000092
edx: 00000000
Sep 27 13:29:28 ogo kernel: esi: d24d7018 edi: 00000000 ebp: db579f0c
esp: d7cb5d78
Sep 27 13:29:28 ogo kernel: ds: 007b es: 007b ss: 0068
Sep 27 13:29:28 ogo kernel: Process nfsd (pid: 24838, ti=d7cb4000 task=f16a6370
task.ti=d7cb4000)
Sep 27 13:29:28 ogo kernel: Stack: f892ee9a f892de48 f892ee8a 00000180 f892f020
c01314f2 d7cb5d90 f768caac
Sep 27 13:29:28 ogo kernel: 00000002 6d000f88 efe7fae0 f768caac efe7fae0
00000000 f8923a67 d7cb5e34
Sep 27 13:29:28 ogo kernel: d7cb5e5c c011a7d8 00000286 00000000 d7cb5e88
efe7fae0 00000004 f7d96800
Sep 27 13:29:28 ogo kernel: Call Trace:
Sep 27 13:29:28 ogo kernel: [<c01314f2>] autoremove_wake_function+0x0/0x35
Sep 27 13:29:28 ogo kernel: [<f8923a67>] ext3_find_entry+0xc6/0x56e [ext3]
Sep 27 13:29:28 ogo kernel: [<c011a7d8>] try_to_wake_up+0x357/0x361
Sep 27 13:29:28 ogo kernel: [<f8e69781>] expkey_match+0x49/0x58 [nfsd]
Sep 27 13:29:28 ogo kernel: [<f8e6931a>] svc_expkey_lookup+0xa1/0xa7 [nfsd]
Sep 27 13:29:28 ogo kernel: [<c012c251>] set_current_groups+0x15b/0x167
Sep 27 13:29:28 ogo kernel: [<f8925448>] ext3_lookup+0x27/0xc4 [ext3]
Sep 27 13:29:28 ogo kernel: [<c0178d1f>] d_alloc+0x142/0x18f
Sep 27 13:29:28 ogo kernel: [<c0171231>] __lookup_hash+0xac/0xc5
Sep 27 13:29:28 ogo kernel: [<c0171650>] lookup_one_len+0x4b/0x59
Sep 27 13:29:28 ogo kernel: [<f8e68d62>] nfsd_lookup+0x320/0x3ce [nfsd]
Sep 27 13:29:28 ogo kernel: [<f8e6cd6b>] nfsd3_proc_lookup+0xc7/0xd5 [nfsd]
Sep 27 13:29:28 ogo kernel: [<f8e0cc03>] svcauth_unix_accept+0xdf/0x1a0
[sunrpc]
Sep 27 13:29:28 ogo kernel: [<f8e630d5>] nfsd_dispatch+0xc5/0x180 [nfsd]
Sep 27 13:29:28 ogo kernel: [<c02a5ce7>] _spin_lock_bh+0x8/0x18
Sep 27 13:29:28 ogo kernel: [<f8e09bd3>] svc_process+0x3b4/0x626 [sunrpc]
Sep 27 13:29:28 ogo kernel: [<c02a5ce7>] _spin_lock_bh+0x8/0x18
Sep 27 13:29:28 ogo kernel: [<f8e635e3>] nfsd+0x1b0/0x315 [nfsd]
Sep 27 13:29:28 ogo kernel: [<c0103ca6>] ret_from_fork+0x6/0x20
Sep 27 13:29:28 ogo kernel: [<f8e63433>] nfsd+0x0/0x315 [nfsd]
Sep 27 13:29:28 ogo kernel: [<c0102005>] kernel_thread_helper+0x5/0xb
Sep 27 13:29:28 ogo kernel: Code: 44 24 10 20 f0 92 f8 c7 44 24 0c 80 01 00 00
c7 44 24 08 8a ee 92 f8 c7 44 24 04 48 de 92 f8 c7 04 24 9a ee 92 f8 e8 31 dd
7f c7 <0f> 0b 80 01 8a ee 92 f8 8b 44 24 3c 89 44 24 20 66 8b 46 02 66
Sep 27 13:29:28 ogo kernel: EIP: [<f8922fc7>] dx_probe+0x174/0x2d8 [ext3]
SS:ESP 0068:d7cb5d78
The nfs client was restarted about an hour later.
On the nfs server, iSCSI target module was created as described here:
https://bugzilla.novell.com/show_bug.cgi?id=232970
the following is the beginning of the /var/log/boot.msg:
Inspecting /boot/System.map-2.6.18.2-34-default
Loaded 23374 symbols from /boot/System.map-2.6.18.2-34-default.
Symbols match kernel version 2.6.18.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 0000000000099c00 (usable)
<4> BIOS-e820: 0000000000099c00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
<4> BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data)
<4> BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000ff780
<7>On node 0 totalpages: 524272
<7> DMA zone: 4096 pages, LIFO batch:0
<7> Normal zone: 225280 pages, LIFO batch:31
<7> HighMem zone: 294896 pages, LIFO batch:31
<6>DMI 2.3 present.
<6>Using APIC driver default
<6>IO/L-APIC allowed because system is MP or new enough
<7>ACPI: RSDP (v000 INTEL ) @ 0x000ff9b0
<7>ACPI: RSDT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0x7fff0000
<7>ACPI: FADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0x7fff0030
<7>ACPI: MADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0x7fff00b0
<7>ACPI: OEMR (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0x7fff0140
<7>ACPI: DSDT (v001 INTEL SWV25 0x00000100 INTL 0x20020918) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x408
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 15:2 APIC version 20
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
<4>Processor #6 15:2 APIC version 20
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<4>Processor #1 15:2 APIC version 20
<6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
<4>Processor #7 15:2 APIC version 20
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
<6>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[24])
<4>IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 24-47
<6>ACPI: IOAPIC (id[0x0a] address[0xfec81400] gsi_base[48])
<4>IOAPIC[2]: apic_id 10, version 32, address 0xfec81400, GSI 48-71
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode: Flat. Using 3 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
<4>Detected 3056.925 MHz processor.
<4>Built 1 zonelists. Total pages: 524272
<5>Kernel command line: root=/dev/sda2 resume=/dev/sda1 splash=silent ip=dhcp
showopts
<6>bootsplash: silent mode.
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<7>mapped IOAPIC to ffffb000 (fec81000)
<7>mapped IOAPIC to ffffa000 (fec81400)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2071812k/2097088k available (1697k kernel code, 23892k reserved,
968k data, 196k init, 1179584k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 6118.37 BogoMIPS
(lpj=12236756)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 3192k freed
<6>ACPI: Core revision 20060707
<4>ACPI Warning (dswload-0695): Type override - [DEB_] had invalid type
(Integer) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [MLIB] had invalid type
(Integer) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [DATA] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [SIO_] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [LEDP] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [GPEN] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [GPST] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [WUES] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [WUSE] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [SBID] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [SWCE] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
<6>SMP alternatives: switching to SMP code
<4>Booting processor 1/1 eip 3000
<6>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 6114.03 BogoMIPS
(lpj=12228067)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#1.
<6>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU1: Thermal monitoring enabled
<4>CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
<6>SMP alternatives: switching to SMP code
<4>Booting processor 2/6 eip 3000
<6>Initializing CPU#2
<4>Calibrating delay using timer specific routine.. 6114.07 BogoMIPS
(lpj=12228143)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 3
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#2.
<6>CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU2: Thermal monitoring enabled
<4>CPU2: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
<6>SMP alternatives: switching to SMP code
<4>Booting processor 3/7 eip 3000
<6>Initializing CPU#3
<4>Calibrating delay using timer specific routine.. 6114.10 BogoMIPS
(lpj=12228204)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 3
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#3.
<6>CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU3: Thermal monitoring enabled
<4>CPU3: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
<6>Total of 4 processors activated (24460.58 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>checking TSC synchronization across 4 CPUs: passed.
<6>Brought up 4 CPUs
<4>migration_cost=185,752
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdb75, last bus=4
<6>PCI: Using configuration type 1
<4>Setting up standard PCI resources
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
<4>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<7>Boot video device is 0000:01:0c.0
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Embedded Controller [EC0] (gpe 8) interrupt mode.
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P6._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P7._PRT]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 11 devices
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
<6>pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
<6>pnp: 00:01: ioport range 0x400-0x4bf could not be reserved
<6>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
<6>pnp: 00:01: ioport range 0x40b-0x40b could not be reserved
<6>pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
<6>PCI: Bridge: 0000:02:1d.0
<6> IO window: disabled.
<6> MEM window: fe900000-fe9fffff
<6> PREFETCH window: f7b00000-fbbfffff
<6>PCI: Bridge: 0000:02:1f.0
<6> IO window: 2000-2fff
<6> MEM window: fdf00000-fe8fffff
<6> PREFETCH window: f7a00000-f7afffff
<6>PCI: Bridge: 0000:00:03.0
<6> IO window: 2000-2fff
<6> MEM window: fdf00000-feafffff
<6> PREFETCH window: f7a00000-fbcfffff
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: 1000-1fff
<6> MEM window: fbe00000-fdefffff
<6> PREFETCH window: f7900000-f79fffff
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>Machine check exception polling timer started.
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<5>audit(1187366526.152:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>PNP: PS/2 controller doesn't have AUX irq; using default 12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>input: AT Translated Set 2 keyboard as /class/input/input1
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<6>ACPI: (supports S0 S1 S4 S5)
<6>Time: tsc clocksource has been installed.
<6>Freeing unused kernel memory: 196k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
<3>ACPI: Getting cpuindex for acpiid 0x6
<4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
<3>ACPI: Getting cpuindex for acpiid 0x7
<7>libata version 2.00 loaded.
<7>ata_piix 0000:00:1f.1: version 2.00ac7
<4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
<7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
<6>ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x3A0 irq 14
<6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3A8 irq 15
<6>scsi0 : ata_piix
<6>scsi1 : ata_piix
<4>ATA: abnormal status 0x7F on port 0x177
<4>ATA: abnormal status 0x7F on port 0x177
<6>ata2.00: ATAPI, max UDMA/33
<6>ata2.00: configured for UDMA/33
<5> Vendor: SAMSUNG Model: CD-ROM SN-124 Rev: N102
<5> Type: CD-ROM ANSI SCSI revision: 05
<6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
<4>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 1:0:0:0: Attached scsi CD-ROM sr0
<5>sr 1:0:0:0: Attached scsi generic sg0 type 5
<4>GDT-HA: Storage RAID Controller Driver. Version: 3.05
<6>ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 48 (level, low) -> IRQ 177
<4>GDT-HA: Found 1 PCI Storage RAID Controllers
<4>Configuring GDT-PCI HA at 4/8 IRQ 177
<4>GDT-HA 0: Name: SRCZCR
<6>scsi2 : SRCZCR
<5> Vendor: Intel Model: Host Drive #00 Rev:
<5> Type: Direct-Access ANSI SCSI revision: 02
<5>SCSI device sda: 143299800 512-byte hdwr sectors (73369 MB)
<5>sda: assuming Write Enabled
<3>sda: assuming drive cache: write through
<5>SCSI device sda: 143299800 512-byte hdwr sectors (73369 MB)
<5>sda: assuming Write Enabled
<3>sda: assuming drive cache: write through
<6> sda: sda1 sda2
<5>sd 2:0:0:0: Attached scsi disk sda
<5>sd 2:0:0:0: Attached scsi generic sg1 type 0
<5> Vendor: ESG-SHV Model: SCA HSBP M22 Rev: 0.06
<5> Type: Processor ANSI SCSI revision: 02
<5>scsi 2:2:6:0: Attached scsi generic sg2 type 3
<6>Fusion MPT base driver 3.04.01
<6>Copyright (c) 1999-2005 LSI Logic Corporation
<6>Fusion MPT SPI Host driver 3.04.01
<6>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 27 (level, low) -> IRQ 185
<6>mptbase: Initiating ioc0 bringup
<6>ioc0: 53C1030: Capabilities={Initiator,Target}
<6>scsi3 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=185
<5> Vendor: transtec Model: T5016R Rev: 0001
<5> Type: Direct-Access ANSI SCSI revision: 03
<6> target3:0:0: Beginning Domain Validation
<6> target3:0:0: Domain Validation skipping write tests
<6> target3:0:0: Ending Domain Validation
<6> target3:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
<5>SCSI device sdb: 3515580416 512-byte hdwr sectors (1799977 MB)
<5>sdb: Write Protect is off
<7>sdb: Mode Sense: ad 00 00 08
<5>SCSI device sdb: drive cache: write back
<5>SCSI device sdb: 3515580416 512-byte hdwr sectors (1799977 MB)
<5>sdb: Write Protect is off
<7>sdb: Mode Sense: ad 00 00 08
<5>SCSI device sdb: drive cache: write back
<6> sdb: sdb1 sdb2
<5>sd 3:0:0:0: Attached scsi disk sdb
<5>sd 3:0:0:0: Attached scsi generic sg3 type 0
<4>scsi: host 3 channel 0 id 0 lun 0x00000200080c0400 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0xff010000ffffffff has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x00028080000a0000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun33554435 has a LUN larger than allowed by the
host adapter
<4>scsi: host 3 channel 0 id 0 lun772 has a LUN larger than allowed by the host
adapter
<4>scsi: host 3 channel 0 id 0 lun 0x0005008002000001 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x0006001440000000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x040703462e800000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x0009000015220000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x070a001130000000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x000bffff080c0400 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0xff0c0000ffffffff has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun168165389 has a LUN larger than allowed by
the host adapter
<4>scsi: host 3 channel 0 id 0 lun 0x000e0c16c0000080 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x000f00000000d18b has a LUN larger than
currently supported.
<5> Vendor: transtec Model: T5016R Rev: 0001
<5> Type: Direct-Access ANSI SCSI revision: 03
<6> target3:0:1: Beginning Domain Validation
<6> target3:0:1: Domain Validation skipping write tests
<6> target3:0:1: Ending Domain Validation
<6> target3:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
<5>SCSI device sdc: 3515580416 512-byte hdwr sectors (1799977 MB)
<5>sdc: Write Protect is off
<7>sdc: Mode Sense: ad 00 00 08
<5>SCSI device sdc: drive cache: write back
<5>SCSI device sdc: 3515580416 512-byte hdwr sectors (1799977 MB)
<5>sdc: Write Protect is off
<7>sdc: Mode Sense: ad 00 00 08
<5>SCSI device sdc: drive cache: write back
<6> sdc: sdc1 sdc2
<5>sd 3:0:1:0: Attached scsi disk sdc
<5>sd 3:0:1:0: Attached scsi generic sg4 type 0
<4>scsi: host 3 channel 0 id 1 lun 0x7400616e73746563 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x5401303136522020 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x3002393530383933 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x3003303130333420 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun772 has a LUN larger than allowed by the host
adapter
<4>scsi: host 3 channel 0 id 1 lun 0x0005008002000001 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x0006001440000000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x040703462e800000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x0009000015220000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x070a001130000000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x000bffff080c0400 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0xff0c0000ffffffff has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun168165389 has a LUN larger than allowed by
the host adapter
<4>scsi: host 3 channel 0 id 1 lun 0x000e0c16c0000080 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x000f00000000d18b has a LUN larger than
currently supported.
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda2, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>EDAC MC: Ver: 2.0.1 Nov 27 2006
<6>EDAC e7xxx: tolm = 80000, remapbase = 4000, remaplimit = 0
<6>EDAC MC0: Giving out device to e7xxx_edac E7501: DEV 0000:00:00.0
<3>i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
<6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 193
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>USB Universal Host Controller Interface driver v3.0
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1d.0: irq 169, io base 0x00003020
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<3>intel_rng: FWH not detected
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.1: irq 201, io base 0x00003000
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
<6>Copyright (c) 1999-2006 Intel Corporation.
<6>ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 30 (level, low) -> IRQ 209
<6>e1000: 0000:03:07.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0e:0c:30:9d:50
<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 31 (level, low) -> IRQ 217
<6>e1000: 0000:03:07.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:0e:0c:30:9d:51
<6>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>Adding 4474060k swap on /dev/sda1. Priority:-1 extents:1 across:4474060k
<6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@xxxxxxxxxx
<6>loop: loaded (max 8 devices)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Aug 17 16:02:06 2007
Trying manual resume from /dev/sda1
Creating device nodes with udev
Loading ide-core
Loading ide-disk
Loading scsi_mod
Loading sd_mod
Loading processor
Loading thermal
Loading libata
Loading ata_piix
Loading fan
Loading edd
Loading piix
Loading gdth
Loading scsi_transport_spi
Loading mptbase
Loading mptscsih
Loading mptspi
Loading jbd
Loading mbcache
Loading ext3
Invoking userspace resume from /dev/sda1
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.3
resume: Could not read the image
Invoking in-kernel resume from /dev/sda1
Waiting for device /dev/sda2 to appear: ok
fsck 1.39 (29-May-2006)
[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda2
/dev/sda2: clean, 64547/8404992 files, 642406/16793949 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda2
Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Aug 17
18:02:24 2007
<notice>boot.udev start
Starting udevd done
<notice>'boot.udev start' exits with status 0
<notice>boot.rootfsck start
Activating swap-devices in /etc/fstab...
done<notice>'boot.rootfsck start' exits with status 0
<notice>boot.loadmodules start
Loading required kernel modules
done<notice>'boot.loadmodules start' exits with status 0
<notice>boot.preload_early start
done
<notice>'boot.preload_early start' exits with status 0
<notice>boot.scpm start
<notice>'boot.scpm start' exits with status 0
<notice>boot.device-mapper start
Activating device mapper...
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
Summary: ext3 fs kernel bug output in /var/log/messages
Product: openSUSE 10.2
Version: Final
Platform: i586
OS/Version: openSUSE 10.2
Status: NEW
Severity: Critical
Priority: P5 - None
Component: Kernel
AssignedTo: kernel-maintainers@xxxxxxxxxxxxxxxxxxxxxx
ReportedBy: reitenbach@xxxxxxxxxxx
QAContact: qa@xxxxxxx
Found By: Customer
The nfs client started to hang on an ls on imported file systems, therefore the
client was rebooted. after a reboot, the client was unable to mount nfs shares
again, for the following reason:
srv:~ # mount /import/docs
nfs server reported tcp not available, falling back to udp
Using NFS over UDP can cause data corruption.
Please refer to the WARNINGS section of the nfs(5) manual page.
mount: nfsserver:/raid/docs: can't read superblock
Therfore a quick look into the messages file on the nfs server revealed the
following:
iotype_init(92) register nullio
ioctl(301) invalid ioctl cmd 48086904
iSCSI Enterprise Target Software - version 0.4.15
iotype_init(92) register fileio
iotype_init(92) register blockio
iotype_init(92) register nullio
ioctl(301) invalid ioctl cmd 48086904
ioctl(301) invalid ioctl cmd c06c690d
ioctl(301) invalid ioctl cmd c06c690d
iSCSI Enterprise Target Software - version 0.4.15
iotype_init(92) register fileio
iotype_init(92) register blockio
iotype_init(92) register nullio
ioctl(301) invalid ioctl cmd 48086904
ioctl(301) invalid ioctl cmd c06c690d
iSCSI Enterprise Target Software - version 0.4.15
iotype_init(92) register fileio
iotype_init(92) register blockio
iotype_init(92) register nullio
ioctl(301) invalid ioctl cmd 48086904
iSCSI Enterprise Target Software - version 0.4.13
iotype_init(90) register fileio
iotype_init(90) register nullio
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
iSCSI Enterprise Target Software - version 0.4.13
iotype_init(90) register fileio
iotype_init(90) register nullio
iSCSI Enterprise Target Software - version 0.4.13
iotype_init(90) register fileio
iotype_init(90) register nullio
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
Assertion failure in dx_probe() at fs/ext3/namei.c:384: "dx_get_limit(entries)
== dx_root_limit(dir, root->info.info_length)"
Sep 27 13:29:28 ogo kernel: ------------[ cut here ]------------
Sep 27 13:29:28 ogo kernel: kernel BUG at fs/ext3/namei.c:384!
Sep 27 13:29:28 ogo kernel: invalid opcode: 0000 [#1]
Sep 27 13:29:28 ogo kernel: SMP
Sep 27 13:29:28 ogo kernel: last sysfs file: /block/sda/size
Sep 27 13:29:28 ogo kernel: Modules linked in: iscsi_trgt nls_utf8 nfsd
exportfs lockd nfs_acl sunrpc crc32c libcrc32c joydev st ide_cd iptable_filter
ip_tables x_tables af_packet reiserfs hfs vfat fat ipv6 button battery ac loop
dm_mod e1000 uhci_hcd shpchp usbcore i2c_i801 e7xxx_edac edac_mc i2c_core
pci_hotplug ext3 mbcache jbd mptspi mptscsih mptbase scsi_transport_spi gdth
piix sg edd fan sr_mod cdrom ata_piix libata thermal processor sd_mod scsi_mod
ide_disk ide_core
Sep 27 13:29:28 ogo kernel: CPU: 3
Sep 27 13:29:28 ogo kernel: EIP: 0060:[<f8922fc7>] Tainted: G U VLI
Sep 27 13:29:28 ogo kernel: EFLAGS: 00010296 (2.6.18.2-34-default #1)
Sep 27 13:29:28 ogo kernel: EIP is at dx_probe+0x174/0x2d8 [ext3]
Sep 27 13:29:28 ogo kernel: eax: 00000081 ebx: f768caac ecx: 00000092
edx: 00000000
Sep 27 13:29:28 ogo kernel: esi: d24d7018 edi: 00000000 ebp: db579f0c
esp: d7cb5d78
Sep 27 13:29:28 ogo kernel: ds: 007b es: 007b ss: 0068
Sep 27 13:29:28 ogo kernel: Process nfsd (pid: 24838, ti=d7cb4000 task=f16a6370
task.ti=d7cb4000)
Sep 27 13:29:28 ogo kernel: Stack: f892ee9a f892de48 f892ee8a 00000180 f892f020
c01314f2 d7cb5d90 f768caac
Sep 27 13:29:28 ogo kernel: 00000002 6d000f88 efe7fae0 f768caac efe7fae0
00000000 f8923a67 d7cb5e34
Sep 27 13:29:28 ogo kernel: d7cb5e5c c011a7d8 00000286 00000000 d7cb5e88
efe7fae0 00000004 f7d96800
Sep 27 13:29:28 ogo kernel: Call Trace:
Sep 27 13:29:28 ogo kernel: [<c01314f2>] autoremove_wake_function+0x0/0x35
Sep 27 13:29:28 ogo kernel: [<f8923a67>] ext3_find_entry+0xc6/0x56e [ext3]
Sep 27 13:29:28 ogo kernel: [<c011a7d8>] try_to_wake_up+0x357/0x361
Sep 27 13:29:28 ogo kernel: [<f8e69781>] expkey_match+0x49/0x58 [nfsd]
Sep 27 13:29:28 ogo kernel: [<f8e6931a>] svc_expkey_lookup+0xa1/0xa7 [nfsd]
Sep 27 13:29:28 ogo kernel: [<c012c251>] set_current_groups+0x15b/0x167
Sep 27 13:29:28 ogo kernel: [<f8925448>] ext3_lookup+0x27/0xc4 [ext3]
Sep 27 13:29:28 ogo kernel: [<c0178d1f>] d_alloc+0x142/0x18f
Sep 27 13:29:28 ogo kernel: [<c0171231>] __lookup_hash+0xac/0xc5
Sep 27 13:29:28 ogo kernel: [<c0171650>] lookup_one_len+0x4b/0x59
Sep 27 13:29:28 ogo kernel: [<f8e68d62>] nfsd_lookup+0x320/0x3ce [nfsd]
Sep 27 13:29:28 ogo kernel: [<f8e6cd6b>] nfsd3_proc_lookup+0xc7/0xd5 [nfsd]
Sep 27 13:29:28 ogo kernel: [<f8e0cc03>] svcauth_unix_accept+0xdf/0x1a0
[sunrpc]
Sep 27 13:29:28 ogo kernel: [<f8e630d5>] nfsd_dispatch+0xc5/0x180 [nfsd]
Sep 27 13:29:28 ogo kernel: [<c02a5ce7>] _spin_lock_bh+0x8/0x18
Sep 27 13:29:28 ogo kernel: [<f8e09bd3>] svc_process+0x3b4/0x626 [sunrpc]
Sep 27 13:29:28 ogo kernel: [<c02a5ce7>] _spin_lock_bh+0x8/0x18
Sep 27 13:29:28 ogo kernel: [<f8e635e3>] nfsd+0x1b0/0x315 [nfsd]
Sep 27 13:29:28 ogo kernel: [<c0103ca6>] ret_from_fork+0x6/0x20
Sep 27 13:29:28 ogo kernel: [<f8e63433>] nfsd+0x0/0x315 [nfsd]
Sep 27 13:29:28 ogo kernel: [<c0102005>] kernel_thread_helper+0x5/0xb
Sep 27 13:29:28 ogo kernel: Code: 44 24 10 20 f0 92 f8 c7 44 24 0c 80 01 00 00
c7 44 24 08 8a ee 92 f8 c7 44 24 04 48 de 92 f8 c7 04 24 9a ee 92 f8 e8 31 dd
7f c7 <0f> 0b 80 01 8a ee 92 f8 8b 44 24 3c 89 44 24 20 66 8b 46 02 66
Sep 27 13:29:28 ogo kernel: EIP: [<f8922fc7>] dx_probe+0x174/0x2d8 [ext3]
SS:ESP 0068:d7cb5d78
The nfs client was restarted about an hour later.
On the nfs server, iSCSI target module was created as described here:
https://bugzilla.novell.com/show_bug.cgi?id=232970
the following is the beginning of the /var/log/boot.msg:
Inspecting /boot/System.map-2.6.18.2-34-default
Loaded 23374 symbols from /boot/System.map-2.6.18.2-34-default.
Symbols match kernel version 2.6.18.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<5>Linux version 2.6.18.2-34-default (geeko@buildhost) (gcc version 4.1.2
20061115 (prerelease) (SUSE Linux)) #1 SMP Mon Nov 27 11:46:27 UTC 2006
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 0000000000099c00 (usable)
<4> BIOS-e820: 0000000000099c00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
<4> BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data)
<4> BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS)
<4> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
<4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
<4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
<5>1151MB HIGHMEM available.
<5>896MB LOWMEM available.
<6>found SMP MP-table at 000ff780
<7>On node 0 totalpages: 524272
<7> DMA zone: 4096 pages, LIFO batch:0
<7> Normal zone: 225280 pages, LIFO batch:31
<7> HighMem zone: 294896 pages, LIFO batch:31
<6>DMI 2.3 present.
<6>Using APIC driver default
<6>IO/L-APIC allowed because system is MP or new enough
<7>ACPI: RSDP (v000 INTEL ) @ 0x000ff9b0
<7>ACPI: RSDT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0x7fff0000
<7>ACPI: FADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0x7fff0030
<7>ACPI: MADT (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0x7fff00b0
<7>ACPI: OEMR (v001 INTEL SWV25 0x00000001 MSFT 0x01000000) @ 0x7fff0140
<7>ACPI: DSDT (v001 INTEL SWV25 0x00000100 INTL 0x20020918) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0x408
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<4>Processor #0 15:2 APIC version 20
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
<4>Processor #6 15:2 APIC version 20
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
<4>Processor #1 15:2 APIC version 20
<6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
<4>Processor #7 15:2 APIC version 20
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
<6>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
<4>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[24])
<4>IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 24-47
<6>ACPI: IOAPIC (id[0x0a] address[0xfec81400] gsi_base[48])
<4>IOAPIC[2]: apic_id 10, version 32, address 0xfec81400, GSI 48-71
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode: Flat. Using 3 I/O APICs
<6>Using ACPI (MADT) for SMP configuration information
<4>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
<4>Detected 3056.925 MHz processor.
<4>Built 1 zonelists. Total pages: 524272
<5>Kernel command line: root=/dev/sda2 resume=/dev/sda1 splash=silent ip=dhcp
showopts
<6>bootsplash: silent mode.
<7>mapped APIC to ffffd000 (fee00000)
<7>mapped IOAPIC to ffffc000 (fec00000)
<7>mapped IOAPIC to ffffb000 (fec81000)
<7>mapped IOAPIC to ffffa000 (fec81400)
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<4>Console: colour VGA+ 80x25
<4>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Memory: 2071812k/2097088k available (1697k kernel code, 23892k reserved,
968k data, 196k init, 1179584k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay using timer specific routine.. 6118.37 BogoMIPS
(lpj=12236756)
<6>Security Framework v1.0.0 initialized
<4>Mount-cache hash table entries: 512
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU0: Thermal monitoring enabled
<4>Compat vDSO mapped to ffffe000.
<6>Checking 'hlt' instruction... OK.
<6>SMP alternatives: switching to UP code
<6>checking if image is initramfs... it is
<6>Freeing initrd memory: 3192k freed
<6>ACPI: Core revision 20060707
<4>ACPI Warning (dswload-0695): Type override - [DEB_] had invalid type
(Integer) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [MLIB] had invalid type
(Integer) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [DATA] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [SIO_] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [LEDP] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [GPEN] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [GPST] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [WUES] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [WUSE] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [SBID] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>ACPI Warning (dswload-0695): Type override - [SWCE] had invalid type
(String) for Scope operator, changed to (Scope) [20060707]
<4>CPU0: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
<6>SMP alternatives: switching to SMP code
<4>Booting processor 1/1 eip 3000
<6>Initializing CPU#1
<4>Calibrating delay using timer specific routine.. 6114.03 BogoMIPS
(lpj=12228067)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 0
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#1.
<6>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU1: Thermal monitoring enabled
<4>CPU1: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
<6>SMP alternatives: switching to SMP code
<4>Booting processor 2/6 eip 3000
<6>Initializing CPU#2
<4>Calibrating delay using timer specific routine.. 6114.07 BogoMIPS
(lpj=12228143)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 3
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#2.
<6>CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU2: Thermal monitoring enabled
<4>CPU2: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
<6>SMP alternatives: switching to SMP code
<4>Booting processor 3/7 eip 3000
<6>Initializing CPU#3
<4>Calibrating delay using timer specific routine.. 6114.10 BogoMIPS
(lpj=12228204)
<7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 512K
<6>CPU: Physical Processor ID: 3
<7>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400
00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#3.
<6>CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU3: Thermal monitoring enabled
<4>CPU3: Intel(R) Xeon(TM) CPU 3.06GHz stepping 09
<6>Total of 4 processors activated (24460.58 BogoMIPS).
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
<6>checking TSC synchronization across 4 CPUs: passed.
<6>Brought up 4 CPUs
<4>migration_cost=185,752
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<6>PCI: PCI BIOS revision 2.10 entry at 0xfdb75, last bus=4
<6>PCI: Using configuration type 1
<4>Setting up standard PCI resources
<6>ACPI: Interpreter enabled
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<7>PCI: Probing PCI hardware (bus 00)
<4>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
<4>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
<6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
<7>Boot video device is 0000:01:0c.0
<6>PCI: Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<6>ACPI: Embedded Controller [EC0] (gpe 8) interrupt mode.
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P6._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P7._PRT]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>pnp: PnP ACPI: found 11 devices
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
<6>pnp: 00:01: ioport range 0x3f0-0x3f1 has been reserved
<6>pnp: 00:01: ioport range 0x400-0x4bf could not be reserved
<6>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
<6>pnp: 00:01: ioport range 0x40b-0x40b could not be reserved
<6>pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
<6>PCI: Bridge: 0000:02:1d.0
<6> IO window: disabled.
<6> MEM window: fe900000-fe9fffff
<6> PREFETCH window: f7b00000-fbbfffff
<6>PCI: Bridge: 0000:02:1f.0
<6> IO window: 2000-2fff
<6> MEM window: fdf00000-fe8fffff
<6> PREFETCH window: f7a00000-f7afffff
<6>PCI: Bridge: 0000:00:03.0
<6> IO window: 2000-2fff
<6> MEM window: fdf00000-feafffff
<6> PREFETCH window: f7a00000-fbcfffff
<6>PCI: Bridge: 0000:00:1e.0
<6> IO window: 1000-1fff
<6> MEM window: fbe00000-fdefffff
<6> PREFETCH window: f7900000-f79fffff
<7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
<6>NET: Registered protocol family 2
<4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
<4>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>TCP reno registered
<6>Machine check exception polling timer started.
<6>apm: BIOS not found.
<6>audit: initializing netlink socket (disabled)
<5>audit(1187366526.152:1): initialized
<4>highmem bounce pool size: 64 pages
<4>Total HugeTLB memory allocated, 0
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>Initializing Cryptographic API
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12ac
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a National Semiconductor PC87306
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>PNP: PS/2 controller doesn't have AUX irq; using default 12
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker as /class/input/input0
<6>input: AT Translated Set 2 keyboard as /class/input/input1
<6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: bitmap version 4.39
<6>NET: Registered protocol family 1
<4>Using IPI No-Shortcut mode
<6>ACPI: (supports S0 S1 S4 S5)
<6>Time: tsc clocksource has been installed.
<6>Freeing unused kernel memory: 196k freed
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<5>SCSI subsystem initialized
<4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
<3>ACPI: Getting cpuindex for acpiid 0x6
<4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not
present [20060707]
<3>ACPI: Getting cpuindex for acpiid 0x7
<7>libata version 2.00 loaded.
<7>ata_piix 0000:00:1f.1: version 2.00ac7
<4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
<6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
<7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
<6>ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x3A0 irq 14
<6>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3A8 irq 15
<6>scsi0 : ata_piix
<6>scsi1 : ata_piix
<4>ATA: abnormal status 0x7F on port 0x177
<4>ATA: abnormal status 0x7F on port 0x177
<6>ata2.00: ATAPI, max UDMA/33
<6>ata2.00: configured for UDMA/33
<5> Vendor: SAMSUNG Model: CD-ROM SN-124 Rev: N102
<5> Type: CD-ROM ANSI SCSI revision: 05
<6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
<4>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 1:0:0:0: Attached scsi CD-ROM sr0
<5>sr 1:0:0:0: Attached scsi generic sg0 type 5
<4>GDT-HA: Storage RAID Controller Driver. Version: 3.05
<6>ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 48 (level, low) -> IRQ 177
<4>GDT-HA: Found 1 PCI Storage RAID Controllers
<4>Configuring GDT-PCI HA at 4/8 IRQ 177
<4>GDT-HA 0: Name: SRCZCR
<6>scsi2 : SRCZCR
<5> Vendor: Intel Model: Host Drive #00 Rev:
<5> Type: Direct-Access ANSI SCSI revision: 02
<5>SCSI device sda: 143299800 512-byte hdwr sectors (73369 MB)
<5>sda: assuming Write Enabled
<3>sda: assuming drive cache: write through
<5>SCSI device sda: 143299800 512-byte hdwr sectors (73369 MB)
<5>sda: assuming Write Enabled
<3>sda: assuming drive cache: write through
<6> sda: sda1 sda2
<5>sd 2:0:0:0: Attached scsi disk sda
<5>sd 2:0:0:0: Attached scsi generic sg1 type 0
<5> Vendor: ESG-SHV Model: SCA HSBP M22 Rev: 0.06
<5> Type: Processor ANSI SCSI revision: 02
<5>scsi 2:2:6:0: Attached scsi generic sg2 type 3
<6>Fusion MPT base driver 3.04.01
<6>Copyright (c) 1999-2005 LSI Logic Corporation
<6>Fusion MPT SPI Host driver 3.04.01
<6>ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 27 (level, low) -> IRQ 185
<6>mptbase: Initiating ioc0 bringup
<6>ioc0: 53C1030: Capabilities={Initiator,Target}
<6>scsi3 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=185
<5> Vendor: transtec Model: T5016R Rev: 0001
<5> Type: Direct-Access ANSI SCSI revision: 03
<6> target3:0:0: Beginning Domain Validation
<6> target3:0:0: Domain Validation skipping write tests
<6> target3:0:0: Ending Domain Validation
<6> target3:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
<5>SCSI device sdb: 3515580416 512-byte hdwr sectors (1799977 MB)
<5>sdb: Write Protect is off
<7>sdb: Mode Sense: ad 00 00 08
<5>SCSI device sdb: drive cache: write back
<5>SCSI device sdb: 3515580416 512-byte hdwr sectors (1799977 MB)
<5>sdb: Write Protect is off
<7>sdb: Mode Sense: ad 00 00 08
<5>SCSI device sdb: drive cache: write back
<6> sdb: sdb1 sdb2
<5>sd 3:0:0:0: Attached scsi disk sdb
<5>sd 3:0:0:0: Attached scsi generic sg3 type 0
<4>scsi: host 3 channel 0 id 0 lun 0x00000200080c0400 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0xff010000ffffffff has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x00028080000a0000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun33554435 has a LUN larger than allowed by the
host adapter
<4>scsi: host 3 channel 0 id 0 lun772 has a LUN larger than allowed by the host
adapter
<4>scsi: host 3 channel 0 id 0 lun 0x0005008002000001 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x0006001440000000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x040703462e800000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x0009000015220000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x070a001130000000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x000bffff080c0400 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0xff0c0000ffffffff has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun168165389 has a LUN larger than allowed by
the host adapter
<4>scsi: host 3 channel 0 id 0 lun 0x000e0c16c0000080 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 0 lun 0x000f00000000d18b has a LUN larger than
currently supported.
<5> Vendor: transtec Model: T5016R Rev: 0001
<5> Type: Direct-Access ANSI SCSI revision: 03
<6> target3:0:1: Beginning Domain Validation
<6> target3:0:1: Domain Validation skipping write tests
<6> target3:0:1: Ending Domain Validation
<6> target3:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31)
<5>SCSI device sdc: 3515580416 512-byte hdwr sectors (1799977 MB)
<5>sdc: Write Protect is off
<7>sdc: Mode Sense: ad 00 00 08
<5>SCSI device sdc: drive cache: write back
<5>SCSI device sdc: 3515580416 512-byte hdwr sectors (1799977 MB)
<5>sdc: Write Protect is off
<7>sdc: Mode Sense: ad 00 00 08
<5>SCSI device sdc: drive cache: write back
<6> sdc: sdc1 sdc2
<5>sd 3:0:1:0: Attached scsi disk sdc
<5>sd 3:0:1:0: Attached scsi generic sg4 type 0
<4>scsi: host 3 channel 0 id 1 lun 0x7400616e73746563 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x5401303136522020 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x3002393530383933 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x3003303130333420 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun772 has a LUN larger than allowed by the host
adapter
<4>scsi: host 3 channel 0 id 1 lun 0x0005008002000001 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x0006001440000000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x040703462e800000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x0009000015220000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x070a001130000000 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x000bffff080c0400 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0xff0c0000ffffffff has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun168165389 has a LUN larger than allowed by
the host adapter
<4>scsi: host 3 channel 0 id 1 lun 0x000e0c16c0000080 has a LUN larger than
currently supported.
<4>scsi: host 3 channel 0 id 1 lun 0x000f00000000d18b has a LUN larger than
currently supported.
<4>Attempting manual resume
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS on sda2, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
<6>EDAC MC: Ver: 2.0.1 Nov 27 2006
<6>EDAC e7xxx: tolm = 80000, remapbase = 4000, remaplimit = 0
<6>EDAC MC0: Giving out device to e7xxx_edac E7501: DEV 0000:00:00.0
<3>i8xx TCO timer: failed to reset NO_REBOOT flag, reboot disabled by hardware
<6>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 193
<6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<6>usbcore: registered new driver usbfs
<6>usbcore: registered new driver hub
<6>USB Universal Host Controller Interface driver v3.0
<6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
<7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1d.0: irq 169, io base 0x00003020
<6>usb usb1: new device found, idVendor=0000, idProduct=0000
<6>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:1d.0
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<3>intel_rng: FWH not detected
<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201
<7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1d.1: irq 201, io base 0x00003000
<6>usb usb2: new device found, idVendor=0000, idProduct=0000
<6>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.18.2-34-default uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1d.1
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<6>Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI
<6>Copyright (c) 1999-2006 Intel Corporation.
<6>ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 30 (level, low) -> IRQ 209
<6>e1000: 0000:03:07.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:0e:0c:30:9d:50
<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 31 (level, low) -> IRQ 217
<6>e1000: 0000:03:07.1: e1000_probe: (PCI-X:100MHz:64-bit) 00:0e:0c:30:9d:51
<6>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
<6>Adding 4474060k swap on /dev/sda1. Priority:-1 extents:1 across:4474060k
<6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@xxxxxxxxxx
<6>loop: loaded (max 8 devices)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Fri Aug 17 16:02:06 2007
Trying manual resume from /dev/sda1
Creating device nodes with udev
Loading ide-core
Loading ide-disk
Loading scsi_mod
Loading sd_mod
Loading processor
Loading thermal
Loading libata
Loading ata_piix
Loading fan
Loading edd
Loading piix
Loading gdth
Loading scsi_transport_spi
Loading mptbase
Loading mptscsih
Loading mptspi
Loading jbd
Loading mbcache
Loading ext3
Invoking userspace resume from /dev/sda1
resume: Could not stat configuration file
resume: libgcrypt version: 1.2.3
resume: Could not read the image
Invoking in-kernel resume from /dev/sda1
Waiting for device /dev/sda2 to appear: ok
fsck 1.39 (29-May-2006)
[/bin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda2
/dev/sda2: clean, 64547/8404992 files, 642406/16793949 blocks
fsck succeeded. Mounting root device read-write.
Mounting root /dev/sda2
Boot logging started on /dev/tty1(/dev/console (deleted)) at Fri Aug 17
18:02:24 2007
<notice>boot.udev start
Starting udevd done
<notice>'boot.udev start' exits with status 0
<notice>boot.rootfsck start
Activating swap-devices in /etc/fstab...
done<notice>'boot.rootfsck start' exits with status 0
<notice>boot.loadmodules start
Loading required kernel modules
done<notice>'boot.loadmodules start' exits with status 0
<notice>boot.preload_early start
done
<notice>'boot.preload_early start' exits with status 0
<notice>boot.scpm start
<notice>'boot.scpm start' exits with status 0
<notice>boot.device-mapper start
Activating device mapper...
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
| < Previous | Next > |