Mailinglist Archive: opensuse-bugs (15100 mails)

[bugzilla_noreply@xxxxxxxxxx]

https://bugzilla.novell.com/show_bug.cgi?id=326372#c59


Alexander Osthof <aosthof@xxxxxxxxxx> changed:

           What    |Removed                                         |Added
----------------------------------------------------------------------------
             Status|ASSIGNED                                        |RESOLVED
         Resolution|                                                |INVALID




--- Comment #59 from Alexander Osthof <aosthof@xxxxxxxxxx>  2007-09-27 07:52:17 MST ---
Ok, I've tried to reproduce this bug using a system with nearly the same
configuration, thus an IDE harddisk for installation and an additionally SATA
harddisk with a former SLES10-SP1 on it.

I've installed a fresh 10.2 and subsequently updated to 10.3 RC3.

Everything went fine, system booted normally. No mess up of device.map.


Here are some logs, first the ones from fresh 10.2 installation:

device.map:
-----------
(fd0)   /dev/fd0
(hd0)   /dev/sda
(hd1)   /dev/hda

fstab:
------
/dev/hda1            /                    ext3       acl,user_xattr        1 1
/dev/hda2            swap                 swap       defaults              0 0
proc                 /proc                proc       defaults              0 0
sysfs                /sys                 sysfs      noauto                0 0
debugfs              /sys/kernel/debug    debugfs    noauto                0 0
usbfs                /proc/bus/usb        usbfs      noauto                0 0
devpts               /dev/pts             devpts     mode=0620,gid=5       0 0
/dev/fd0             /media/floppy        auto       noauto,user,sync      0 0

menu.lst:
---------
# Modified by YaST2. Last modification on Thu Sep 27 11:58:43 UTC 2007
default 0
timeout 8
gfxmenu (hd1,0)/boot/message

###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.2
    root (hd1,0)
    kernel /boot/vmlinuz-2.6.18.2-34-default root=/dev/hda1 vga=normal 
console=tty0 console=ttyS0,57600 sysreq=1 resume=/dev/hda2 splash=silent
showopts
    initrd /boot/initrd-2.6.18.2-34-default

###Don't change this comment - YaST2 identifier: Original name: SUSE Linux
Enterprise Server 10 SP1 (/dev/sda1)###
title SUSE Linux Enterprise Server 10 SP1 (/dev/sda1)
    kernel (hd0,0)/boot/vmlinuz-2.6.16.46-0.12-smp
root=/dev/disk/by-id/scsi-SATA_Maxtor_7L250S0_L59NYFHG_L59NYFHG-part1
vga=normal sysreq=1 resume=/dev/sd
a2 splash=silent showopts
    initrd (hd0,0)/boot/initrd-2.6.16.46-0.12-smp

###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
    rootnoverify (hd0,0)
    chainloader (fd0)+1

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.2
    root (hd1,0)
    kernel /boot/vmlinuz-2.6.18.2-34-default root=/dev/hda1 vga=normal showopts
ide=nodma apm=off acpi=off noresume edd=off 3
    initrd /boot/initrd-2.6.18.2-34-default

/proc/partitions:
-----------------
major minor  #blocks  name

   7     0      72424 loop0
   3     0   60051600 hda
   3     1   10490413 hda1
   3     2    4200997 hda2
   8     0  244140625 sda
   8     1   10490413 sda1
   8     2    2104515 sda2


And now the ones from update to 10.3 RC3:

device.map:
-----------
(fd0)   /dev/fd0
(hd1)   /dev/sda
(hd0)   /dev/sdb

fstab:
------
/dev/sda1            /                    ext3       acl,user_xattr        1 1
/dev/sda2            swap                 swap       defaults              0 0
proc                 /proc                proc       defaults              0 0
sysfs                /sys                 sysfs      noauto                0 0
debugfs              /sys/kernel/debug    debugfs    noauto                0 0
usbfs                /proc/bus/usb        usbfs      noauto                0 0
devpts               /dev/pts             devpts     mode=0620,gid=5       0 0
/dev/fd0             /media/floppy        auto       noauto,user,sync      0 0

menu.lst:
---------
# Modified by YaST2. Last modification on Thu Sep 27 15:02:50 CEST 2007
default 0
timeout 8
gfxmenu (hd1,0)/boot/message

###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3
    root (hd1,0)
    kernel /boot/vmlinuz-2.6.22.5-31-default
root=/dev/disk/by-id/scsi-SATA_IC35L060AVER07-_SZPTZTAH755-part1
console=ttyS0,57600 console=tty0 sysreq=1 resume=/dev/sda2 splash=silent 
showopts
    initrd /boot/initrd-2.6.22.5-31-default

###Don't change this comment - YaST2 identifier: Original name: SUSE Linux
Enterprise Server 10 SP1 (/dev/sda1)###
title SUSE Linux Enterprise Server 10 SP1 (/dev/sda1)
    rootnoverify (hd0,0)
    chainloader +1

###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
    rootnoverify (hd1,0)
    chainloader (fd0)+1

###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3
    root (hd1,0)
    kernel /boot/vmlinuz-2.6.22.5-31-default
root=/dev/disk/by-id/scsi-SATA_IC35L060AVER07-_SZPTZTAH755-part1 showopts
ide=nodma apm=off acpi=off noresume edd=off 3
    initrd /boot/initrd-2.6.22.5-31-default

###Don't change this comment - YaST2 identifier: Original name: xen###
title XEN
    root (hd1,0)
    kernel /boot/xen.gz console=com1 com1=57600
    module /boot/vmlinuz-xen
root=/dev/disk/by-id/scsi-SATA_IC35L060AVER07-_SZPTZTAH755-part1 
console=ttyS0,57600 console=tty0 sysreq=1 resume=/dev/sda2 splash=silent
showopts
    module /boot/initrd-xen

/proc/partitions:
-----------------
major minor  #blocks  name

   7     0      69660 loop0
   8     0   60051600 sda
   8     1   10490413 sda1
   8     2    4200997 sda2
   8    16  244140625 sdb
   8    17   10490413 sdb1
   8    18    2104515 sdb2


>From my point of view, everything looks fine. I assume there has been a fault
derived from a former installation or maybe user intervention.

As I can't reproduce, I close this bug RESOLVED INVALID.


-- 
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.