Mailinglist Archive: opensuse-bugs (15134 mails)

< Previous Next >
[Bug 327684] iwl4965: Connecting to WLAN via NetworkManager fails
  • From: bugzilla_noreply@xxxxxxxxxx
  • Date: Tue, 25 Sep 2007 10:46:31 -0600 (MDT)
  • Message-id: <20070925164631.743EA245269@xxxxxxxxxxxxxxxxxxxxxx>
https://bugzilla.novell.com/show_bug.cgi?id=327684#c4


Billy Coutsis <chemaja@xxxxxxxxx> changed:

           What    |Removed                                         |Added
----------------------------------------------------------------------------
                 CC|                                                |chemaja@xxxxxxxxx




--- Comment #4 from Billy Coutsis <chemaja@xxxxxxxxx>  2007-09-25 10:46:31 MST ---
My iwl4965 is also failing to connect to my 802.11g network (a Linksys WRT54GL
v1.1, using WPA2 Personal encryption).

Here's information from lspci and lsmod, and also a successful scan from
iwlist:

oceanview:~ # lspci |grep Wireless
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN
Network Connection (rev 61)
oceanview:~ # lsmod |grep iwl4965
iwl4965                96860  0
firmware_class         13568  2 microcode,iwl4965
mac80211              158216  1 iwl4965
oceanview:~ # iwlist wlan0 scan
wlan0     Scan completed :
          Cell 01 - Address: 00:1A:70:46:D3:B6
                    ESSID:"woodsman"
                    Mode:Master
                    Channel:11
                    Frequency:2.462 GHz
                    Quality=95/100  Signal level=-34 dBm  Noise level=-127 dBm
                    Encryption key:on
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
                              12 Mb/s; 48 Mb/s
                    Extra:tsf=000000085c4ba189

Here's what looks to be the relevant section from /var/log/NetworkManager:

Sep 26 02:31:25 oceanview NetworkManager: <info>  SWITCH: terminating current
connection 'eth0' because it's no longer valid.
Sep 26 02:31:25 oceanview NetworkManager: <info>  Deactivating device eth0.
Sep 26 02:31:26 oceanview NetworkManager: nm_device_is_802_3_ethernet:
assertion `dev != NULL' failed
Sep 26 02:31:26 oceanview NetworkManager: nm_device_is_802_11_wireless:
assertion `dev != NULL' failed
Sep 26 02:31:27 oceanview NetworkManager: <info>  Error getting killswitch
power arguments: org.freedesktop.DBus.Error.InvalidArgs - Argument 0 is
specified to be of type "uint32", but is actually of type "int32" 
Sep 26 02:31:59 oceanview syslog-ng[2598]: last message repeated 5 times
Sep 26 02:31:59 oceanview NetworkManager: <debug> [1190737919.121959]
nm_device_802_11_wireless_get_activation_ap(): Forcing AP 'woodsman'
Sep 26 02:31:59 oceanview NetworkManager: <info>  User Switch:
/org/freedesktop/NetworkManager/Devices/wlan0 / woodsman
Sep 26 02:31:59 oceanview NetworkManager: <info>  Deactivating device wlan0.
Sep 26 02:31:59 oceanview NetworkManager: <info>  Device wlan0 activation
scheduled...
Sep 26 02:31:59 oceanview NetworkManager: <info>  Activation (wlan0) started...
Sep 26 02:31:59 oceanview NetworkManager: <info>  Activation (wlan0) Stage 1 of
5 (Device Prepare) scheduled...
Sep 26 02:31:59 oceanview NetworkManager: <info>  Activation (wlan0) Stage 1 of
5 (Device Prepare) started...
Sep 26 02:31:59 oceanview NetworkManager: <info>  Activation (wlan0) Stage 2 of
5 (Device Configure) scheduled...
Sep 26 02:31:59 oceanview NetworkManager: <info>  Activation (wlan0) Stage 1 of
5 (Device Prepare) complete.
Sep 26 02:31:59 oceanview NetworkManager: <info>  Activation (wlan0) Stage 2 of
5 (Device Configure) starting...
Sep 26 02:31:59 oceanview NetworkManager: <info>  Activation (wlan0/wireless):
access point 'woodsman' is encrypted, but NO valid key exists.  New key needed.
Sep 26 02:31:59 oceanview NetworkManager: <info>  Activation (wlan0) New
wireless user key requested for network 'woodsman'.
Sep 26 02:31:59 oceanview NetworkManager: <info>  Activation (wlan0) Stage 2 of
5 (Device Configure) complete.
Sep 26 02:32:04 oceanview NetworkManager: <info>  Error getting killswitch
power arguments: org.freedesktop.DBus.Error.InvalidArgs - Argument 0 is
specified to be of type "uint32", but is actually of type "int32" 
Sep 26 02:32:47 oceanview syslog-ng[2598]: last message repeated 7 times
Sep 26 02:32:47 oceanview NetworkManager: <info>  Activation (wlan0) New
wireless user key for network 'woodsman' received.
Sep 26 02:32:47 oceanview NetworkManager: <info>  Activation (wlan0) Stage 1 of
5 (Device Prepare) scheduled...
Sep 26 02:32:47 oceanview NetworkManager: <info>  Activation (wlan0) Stage 1 of
5 (Device Prepare) started...
Sep 26 02:32:47 oceanview NetworkManager: <info>  Activation (wlan0) Stage 2 of
5 (Device Configure) scheduled...
Sep 26 02:32:47 oceanview NetworkManager: <info>  Activation (wlan0) Stage 1 of
5 (Device Prepare) complete.
Sep 26 02:32:47 oceanview NetworkManager: <info>  Activation (wlan0) Stage 2 of
5 (Device Configure) starting...
Sep 26 02:32:47 oceanview NetworkManager: <info>  Activation (wlan0/wireless):
access point 'woodsman' is encrypted, and a key exists.  No new key needed.
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: sending command
'INTERFACE_ADD wlan0             wext    /var/run/wpa_supplicant '
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: sending command 'AP_SCAN
1'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: sending command
'ADD_NETWORK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: response was '0'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 ssid 776f6f64736d616e'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 scan_ssid 1'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 proto WPA2'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 key_mgmt WPA-PSK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 psk <key>'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: sending command
'ENABLE_NETWORK 0'
Sep 26 02:32:48 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:32:48 oceanview NetworkManager: <info>  Activation (wlan0) Stage 2 of
5 (Device Configure) complete.
Sep 26 02:32:52 oceanview NetworkManager: <info>  Error getting killswitch
power arguments: org.freedesktop.DBus.Error.InvalidArgs - Argument 0 is
specified to be of type "uint32", but is actually of type "int32" 
Sep 26 02:32:52 oceanview NetworkManager: <info>  Error getting killswitch
power arguments: org.freedesktop.DBus.Error.InvalidArgs - Argument 0 is
specified to be of type "uint32", but is actually of type "int32" 
Sep 26 02:33:00 oceanview NetworkManager: <info>  Old device 'wlan0'
activating, won't change.
Sep 26 02:33:04 oceanview NetworkManager: <info>  Error getting killswitch
power arguments: org.freedesktop.DBus.Error.InvalidArgs - Argument 0 is
specified to be of type "uint32", but is actually of type "int32" 
Sep 26 02:33:05 oceanview NetworkManager: <info>  Old device 'wlan0'
activating, won't change.
Sep 26 02:33:10 oceanview NetworkManager: <info>  Error getting killswitch
power arguments: org.freedesktop.DBus.Error.InvalidArgs - Argument 0 is
specified to be of type "uint32", but is actually of type "int32" 
Sep 26 02:33:12 oceanview NetworkManager: <info>  Activation (wlan0/wireless):
disconnected during association, asking for new key.
Sep 26 02:33:12 oceanview NetworkManager: <info>  Activation (wlan0) New
wireless user key requested for network 'woodsman'.
Sep 26 02:33:15 oceanview NetworkManager: <info>  SWITCH: terminating current
connection 'wlan0' because it's no longer valid.
Sep 26 02:33:15 oceanview NetworkManager: <info>  Deactivating device wlan0.
Sep 26 02:33:15 oceanview NetworkManager: <info>  Activation (wlan0):
cancelling...
Sep 26 02:33:15 oceanview NetworkManager: <info>  Activation (wlan0)
cancellation handler scheduled...
Sep 26 02:33:15 oceanview NetworkManager: <info>  Activation (wlan0)
cancellation handled.
Sep 26 02:33:15 oceanview NetworkManager: <info>  Activation (wlan0):
cancelled.
Sep 26 02:33:16 oceanview NetworkManager: nm_device_is_802_3_ethernet:
assertion `dev != NULL' failed
Sep 26 02:33:16 oceanview NetworkManager: nm_device_is_802_11_wireless:
assertion `dev != NULL' failed
Sep 26 02:33:16 oceanview NetworkManager: <info>  Error getting killswitch
power arguments: org.freedesktop.DBus.Error.InvalidArgs - Argument 0 is
specified to be of type "uint32", but is actually of type "int32" 
Sep 26 02:33:42 oceanview syslog-ng[2598]: last message repeated 4 times
Sep 26 02:33:42 oceanview NetworkManager: <info>  Activation (wlan0) New
wireless user key for network 'woodsman' received.
Sep 26 02:33:42 oceanview NetworkManager: <info>  Activation (wlan0) Stage 1 of
5 (Device Prepare) scheduled...
Sep 26 02:33:42 oceanview NetworkManager: <info>  Activation (wlan0) Stage 1 of
5 (Device Prepare) started...
Sep 26 02:33:42 oceanview NetworkManager: <info>  Activation (wlan0) Stage 2 of
5 (Device Configure) scheduled...
Sep 26 02:33:42 oceanview NetworkManager: <info>  Activation (wlan0) Stage 1 of
5 (Device Prepare) complete.
Sep 26 02:33:42 oceanview NetworkManager: <info>  Activation (wlan0) Stage 2 of
5 (Device Configure) starting...
Sep 26 02:33:42 oceanview NetworkManager: <info>  Activation (wlan0/wireless):
access point 'woodsman' is encrypted, and a key exists.  No new key needed.
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: sending command
'INTERFACE_ADD wlan0             wext    /var/run/wpa_supplicant '
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: sending command 'AP_SCAN
1'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: sending command
'ADD_NETWORK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: response was '0'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 ssid 776f6f64736d616e'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 scan_ssid 1'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 proto WPA2'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 key_mgmt WPA-PSK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: sending command
'SET_NETWORK 0 psk <key>'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: sending command
'ENABLE_NETWORK 0'
Sep 26 02:33:43 oceanview NetworkManager: <info>  SUP: response was 'OK'
Sep 26 02:33:43 oceanview NetworkManager: <info>  Activation (wlan0) Stage 2 of
5 (Device Configure) complete.
Sep 26 02:33:46 oceanview NetworkManager: <info>  Error getting killswitch
power arguments: org.freedesktop.DBus.Error.InvalidArgs - Argument 0 is
specified to be of type "uint32", but is actually of type "int32" 
Sep 26 02:34:43 oceanview syslog-ng[2598]: last message repeated 9 times
Sep 26 02:34:43 oceanview NetworkManager: nm_act_request_get_ap: assertion `req
!= NULL' failed
Sep 26 02:34:43 oceanview NetworkManager: ap_is_auth_required: assertion `ap !=
NULL' failed
Sep 26 02:34:43 oceanview NetworkManager: <info>  Activation (wlan0/wireless):
association took too long (>60s), asking for new key.
Sep 26 02:34:43 oceanview NetworkManager: nm_dbus_get_user_key_for_network:
assertion `req != NULL' failed
Sep 26 02:34:47 oceanview NetworkManager: <info>  Error getting killswitch
power arguments: org.freedesktop.DBus.Error.InvalidArgs - Argument 0 is
specified to be of type "uint32", but is actually of type "int32" 


-- 
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.

< Previous Next >
References