Mailinglist Archive: opensuse-bugs (15082 mails)
| < Previous | Next > |
[Bug 310422] New: PATA disk: 'limited to UDMA/33 due to 40-wire cable' wrong
- From: bugzilla_noreply@xxxxxxxxxx
- Date: Thu, 13 Sep 2007 15:26:12 -0600 (MDT)
- Message-id: <bug-310422-21960@xxxxxxxxxxxxxxxxxxxxxxxxx/>
https://bugzilla.novell.com/show_bug.cgi?id=310422
Summary: PATA disk: 'limited to UDMA/33 due to 40-wire cable'
wrong
Product: openSUSE 10.3
Version: Beta 3
Platform: x86-64
OS/Version: openSUSE 10.3
Status: NEW
Severity: Normal
Priority: P5 - None
Component: Kernel
AssignedTo: kernel-maintainers@xxxxxxxxxxxxxxxxxxxxxx
ReportedBy: schnatbaum.k.m@xxxxxxxxx
QAContact: qa@xxxxxxx
Found By: Beta-Customer
In dmesg output I see:
..
libata version 3.00 loaded.
pata_amd 0000:00:04.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:04.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
0x000000000001f000 irq 14
ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
0x000000000001f008 irq 15
ata1.00: ATA-7: SAMSUNG SP1634N, UZ100-03, max UDMA/133
ata1.00: 312581808 sectors, multi 1: LBA48
ata1.00: limited to UDMA/33 due to 40-wire cable
..
This causes my PATA disk to run with udma2 only.
But UDMA/133 (udma6) is used by Windows/XP on same machine.
Mainboard: Asus M2N-E
Harddisk: Samsung SP1634N (PATA)
Output of 'hdparm -I /dev/sda':
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG SP1634N
Serial Number: S0BKJ10YC06234
Firmware Revision: UZ100-03
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 1
Supported: 7 6 5 4 & some of 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 1
Recommended acoustic management value: 254, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
100min for SECURITY ERASE UNIT. 100min for ENHANCED SECURITY ERASE
UNIT.
Checksum: correct
Output of 'lspci':
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:06.0 SCSI storage controller: Tekram Technology Co.,Ltd. TRM-S1040 (rev 01)
01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
02:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300
(PCIE)]
02:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
Mainboard: Asus M2N-E
Harddisk: Samsung SP1634N (PATA)
Output of 'hdparm -I /dev/sda':
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG SP1634N
Serial Number: S0BKJ10YC06234
Firmware Revision: UZ100-03
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 1
Supported: 7 6 5 4 & some of 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 1
Recommended acoustic management value: 254, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
100min for SECURITY ERASE UNIT. 100min for ENHANCED SECURITY ERASE
UNIT.
Checksum: correct
Output of 'lspci -n':
00:00.0 Class 0500: 10de:0369 (rev a1)
00:01.0 Class 0601: 10de:0360 (rev a2)
00:01.1 Class 0c05: 10de:0368 (rev a2)
00:01.2 Class 0500: 10de:036a (rev a2)
00:02.0 Class 0c03: 10de:036c (rev a1)
00:02.1 Class 0c03: 10de:036d (rev a2)
00:04.0 Class 0101: 10de:036e (rev a1)
00:05.0 Class 0101: 10de:037f (rev a2)
00:05.1 Class 0101: 10de:037f (rev a2)
00:05.2 Class 0101: 10de:037f (rev a2)
00:06.0 Class 0604: 10de:0370 (rev a2)
00:06.1 Class 0403: 10de:0371 (rev a2)
00:08.0 Class 0680: 10de:0373 (rev a2)
00:0f.0 Class 0604: 10de:0377 (rev a2)
00:18.0 Class 0600: 1022:1100
00:18.1 Class 0600: 1022:1101
00:18.2 Class 0600: 1022:1102
00:18.3 Class 0600: 1022:1103
01:06.0 Class 0100: 1de1:0391 (rev 01)
01:08.0 Class 0200: 10ec:8139 (rev 10)
02:00.0 Class 0300: 1002:5b60
02:00.1 Class 0380: 1002:5b70
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
Summary: PATA disk: 'limited to UDMA/33 due to 40-wire cable'
wrong
Product: openSUSE 10.3
Version: Beta 3
Platform: x86-64
OS/Version: openSUSE 10.3
Status: NEW
Severity: Normal
Priority: P5 - None
Component: Kernel
AssignedTo: kernel-maintainers@xxxxxxxxxxxxxxxxxxxxxx
ReportedBy: schnatbaum.k.m@xxxxxxxxx
QAContact: qa@xxxxxxx
Found By: Beta-Customer
In dmesg output I see:
..
libata version 3.00 loaded.
pata_amd 0000:00:04.0: version 0.3.8
PCI: Setting latency timer of device 0000:00:04.0 to 64
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma
0x000000000001f000 irq 14
ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma
0x000000000001f008 irq 15
ata1.00: ATA-7: SAMSUNG SP1634N, UZ100-03, max UDMA/133
ata1.00: 312581808 sectors, multi 1: LBA48
ata1.00: limited to UDMA/33 due to 40-wire cable
..
This causes my PATA disk to run with udma2 only.
But UDMA/133 (udma6) is used by Windows/XP on same machine.
Mainboard: Asus M2N-E
Harddisk: Samsung SP1634N (PATA)
Output of 'hdparm -I /dev/sda':
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG SP1634N
Serial Number: S0BKJ10YC06234
Firmware Revision: UZ100-03
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 1
Supported: 7 6 5 4 & some of 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 1
Recommended acoustic management value: 254, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
100min for SECURITY ERASE UNIT. 100min for ENHANCED SECURITY ERASE
UNIT.
Checksum: correct
Output of 'lspci':
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:06.0 SCSI storage controller: Tekram Technology Co.,Ltd. TRM-S1040 (rev 01)
01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
02:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300
(PCIE)]
02:00.1 Display controller: ATI Technologies Inc RV370 [Radeon X300SE]
Mainboard: Asus M2N-E
Harddisk: Samsung SP1634N (PATA)
Output of 'hdparm -I /dev/sda':
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG SP1634N
Serial Number: S0BKJ10YC06234
Firmware Revision: UZ100-03
Standards:
Used: ATA/ATAPI-6 T13 1410D revision 1
Supported: 7 6 5 4 & some of 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 1
Recommended acoustic management value: 254, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
100min for SECURITY ERASE UNIT. 100min for ENHANCED SECURITY ERASE
UNIT.
Checksum: correct
Output of 'lspci -n':
00:00.0 Class 0500: 10de:0369 (rev a1)
00:01.0 Class 0601: 10de:0360 (rev a2)
00:01.1 Class 0c05: 10de:0368 (rev a2)
00:01.2 Class 0500: 10de:036a (rev a2)
00:02.0 Class 0c03: 10de:036c (rev a1)
00:02.1 Class 0c03: 10de:036d (rev a2)
00:04.0 Class 0101: 10de:036e (rev a1)
00:05.0 Class 0101: 10de:037f (rev a2)
00:05.1 Class 0101: 10de:037f (rev a2)
00:05.2 Class 0101: 10de:037f (rev a2)
00:06.0 Class 0604: 10de:0370 (rev a2)
00:06.1 Class 0403: 10de:0371 (rev a2)
00:08.0 Class 0680: 10de:0373 (rev a2)
00:0f.0 Class 0604: 10de:0377 (rev a2)
00:18.0 Class 0600: 1022:1100
00:18.1 Class 0600: 1022:1101
00:18.2 Class 0600: 1022:1102
00:18.3 Class 0600: 1022:1103
01:06.0 Class 0100: 1de1:0391 (rev 01)
01:08.0 Class 0200: 10ec:8139 (rev 10)
02:00.0 Class 0300: 1002:5b60
02:00.1 Class 0380: 1002:5b70
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
| < Previous | Next > |