https://bugzilla.novell.com/show_bug.cgi?id=278700
------- Comment #4 from harbaugh@ncifcrf.gov 2007-05-29 12:37 MST -------
I installed the
kernel-ppc64-2.6.22_rc2_git7-20070527162723.ppc.rpm
after 'repairing' the system to a slightly earlier state.
But the bug is still there:
0 > boot hd:4,\suseboot\yaboot load-size=5ac0d adler32=d416af9a
Loading ELF
yaboot starting: loaded at 00200000 002223f0 (0/200000/ff846d38; sp: 0022afd0)
Config file 'yaboot.conf' read, 1103 bytes
Welcome to yaboot version 10.1.22-r948.SuSE
booted from '/ht/pci@7/k2-sata-root/k2-sata@0/disk@0:4,\suseboot\yaboot'
Enter "help" to get some basic usage information
boot:
lin2622 linux * linsysdep
boot: lin2622
Please wait, loading kernel...
Allocated 00a00000 bytes for kernel @ 00400000
Elf64 kernel loaded...
Loading ramdisk...
ramdisk loaded 002c8000 @ 01500000
OF stdout device is: /ht@0,f2000000/pci@3/mac-io@7/escc@13000/ch-a@13020
command line: root=/dev/sda3 console=ttyS0,57600 video=ofonly debug quiet
sysrq=1 insmod=sym53c8xx insmod=ipr
memory layout at init:
alloc_bottom : 00000000017c8000
alloc_top : 0000000030000000
alloc_top_hi : 0000000180000000
rmo_top : 0000000030000000
ram_top : 0000000180000000
Looking for displays
copying OF device tree ...
Building dt strings...
Building dt structure...
Device tree strings 0x00000000019c9000 -> 0x00000000019ca382
Device tree struct 0x00000000019cb000 -> 0x00000000019de000
Calling quiesce ...
DO-QUIESCE finishedreturning from prom_init
Hello World !
Starting Linux PPC64 #1 SMP 2007/05/27 16:27:23 UTC
-----------------------------------------------------
ppc64_pft_size = 0x0
physicalMemorySize = 0x100000000
ppc64_caches.dcache_line_size = 0x80
ppc64_caches.icache_line_size = 0x80
htab_address = 0xc00000017c000000
htab_hash_mask = 0x7ffff
-----------------------------------------------------
Linux version 2.6.22-rc2-git7-20070527162723-ppc64 (geeko@buildhost) (gcc
version 4.1.3 20070521 (prerelease) (SUSE Linux)) #1 SMP 2007/05/27 16:27:23
UTC
CF000012
Setup Arch
[boot]0012 Setup Arch
Found U3-AGP PCI host bridge. Firmware bus number: 240->255
Can't get bus-range for /ht@0,f2000000, assume bus 0
Found U3-HT PCI host bridge. Firmware bus number: 0->239
PCI Host 0, io start: 400000; io end: bfffff
PCI Host 1, io start: 0; io end: 3fffff
via-pmu: Server Mode is disabled
PMU driver v2 initialized for Core99, firmware: 0c
nvram: Checking bank 0...
nvram: gen0=236, gen1=235
nvram: Active bank is: 0
nvram: OF partition at 0x410
nvram: XP partition at 0x1020
nvram: NR partition at 0x1120
Zone PFN ranges:
DMA 0 -> 1572864
Normal 1572864 -> 1572864
early_node_map[2] active PFN ranges
0: 0 -> 524288
0: 1048576 -> 1572864
CF000015
Setup Done
[boot]0015 Setup Done
Built 1 zonelists. Total pages: 1027072
Kernel command line: root=/dev/sda3 console=ttyS0,57600 video=ofonly debug
quiet sysrq=1 insmod=sym53c8xx insmod=ipr
smp_core99_probe
smp_core99_kick_cpu
smp_core99_kick_cpu done
core99_setup_cpu 0 done
SuSE Linux
#1 SMP 2007/05/27 16:27:23 UTC
rtas_flash: no firmware flash support
------------[ cut here ]------------
Badness at lib/kref.c:33
------------[ cut here ]------------
Badness at lib/kref.c:33
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc000000000208158
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=128 NUMA PowerMac
Modules linked in:
NIP: c000000000208158 LR: c00000000020813c CTR: 0000000000000000
REGS: c00000017bf0f8b0 TRAP: 0300 Not tainted
(2.6.22-rc2-git7-20070527162723-ppc64)
MSR: 9000000000009032