https://bugzilla.novell.com/show_bug.cgi?id=259992 ------- Comment #17 from shanti@mojo.cc 2007-05-29 07:24 MST ------- cat /proc/acpi/fan/FAN/state status: on cat /proc/acpi/thermal_zone/THRM/temperature temperature: 46 C cat /proc/acpi/thermal_zone/THRM/trip_points critical (S5): 60 C passive: 50 C: tc1=4 tc2=3 tsp=60 devices=0xffff810037fe72b0 active[0]: 50 C: devices=0xffff810037fde290 this fan is the CPU which is set to "SmartFan" in BIOS .. i also have ksensors running. Since i cannot monitore northbridge/Systemfan anymore (nomore it87 and related) this is not optimal i know when this shutdown occured there was definitly NO problem with temperature at all , silent smooth and cool my system is. ATM i am running `cat /dev/zero >/dev/null` on both core (AMDx2) generating full utilaziation on the CPUs for 15 minutes and my /proc/acpi/thermal_zone/THRM/temperature doesnt even raise more than 2° , even fan is still working rather silently. My point was only if there shouldnt be a workaround in the kernel or the module or the powerwatch to concern the mistaken panic and at least wait for next result ( like a UPS would care about powerfailure ) .. as you see , this result are meaningless after the next poll ( after a few seconds ) .. now i will change to modprobed it87 and lett you know again :-) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.