https://bugzilla.novell.com/show_bug.cgi?id=277475 Summary: Sane gt68xx backend unable to scan on AMD64 Product: openSUSE 10.3 Version: Alpha 4 Platform: x86-64 OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Other AssignedTo: bnc-team-screening@forge.provo.novell.com ReportedBy: mt@novell.com QAContact: qa@suse.de While it works fine with same configuration on a i686 Box, it fails to scan on x86_64 (AMD64 X2) completely. /etc/sane.d/gt68xx.conf: # Mustek ScanExpress 1200 UB Plus: override "mustek-scanexpress-1200-ub-plus" firmware "/etc/sane.d/firmware/sbfw.usb" # rpm -qa | grep sane sane-frontends-1.0.14-85 sane-backends-1.0.18-30 # scanimage scanimage: open of device gt68xx:libusb:002:004 failed: Invalid argument in /var/log/messages: May 23 18:02:57 xanthos kernel: usb 2-4.2: usbfs: interface 0 claimed by usbfs while 'xscanimage' sets config #1 May 23 18:03:10 xanthos kernel: usb 2-4.2: usbfs: USBDEVFS_CONTROL failed cmd xscanimage rqt 192 rq 1 len 64 ret -110 May 23 18:03:48 xanthos kernel: usb 2-4.2: usbfs: USBDEVFS_CONTROL failed cmd scanimage rqt 192 rq 1 len 64 ret -110 May 23 18:04:31 xanthos kernel: usb 2-4.2: usbfs: USBDEVFS_CONTROL failed cmd scanimage rqt 192 rq 1 len 64 ret -110 May 23 18:05:12 xanthos kernel: usb 2-4.2: usbfs: USBDEVFS_CONTROL failed cmd scanimage rqt 192 rq 1 len 64 ret -110 May 23 18:13:32 xanthos kernel: usb 2-4.2: USB disconnect, address 4 May 23 18:13:32 xanthos kernel: usb 2-4.2: new full speed USB device using ehci_hcd and address 6 May 23 18:13:32 xanthos kernel: usb 2-4.2: new device found, idVendor=05d8, idProduct=4002 May 23 18:13:32 xanthos kernel: usb 2-4.2: new device strings: Mfr=0, Product=0, SerialNumber=0 May 23 18:13:32 xanthos kernel: usb 2-4.2: configuration #1 chosen from 1 choice -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.