Mailinglist Archive: opensuse-bugs (6366 mails)
| < Previous | Next > |
[Bug 270236] Different xorg.conf is installed then was created during installation
- From: bugzilla_noreply@xxxxxxxxxx
- Date: Tue, 1 May 2007 04:32:13 -0600 (MDT)
- Message-id: <20070501103213.E1E6825C887@xxxxxxxxxxxxxxxxxxxxxx>
https://bugzilla.novell.com/show_bug.cgi?id=270236
volker3204@xxxxxxxxxxxxxxx changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
Info Provider|volker3204@xxxxxxxxxxxxxxx |
------- Comment #2 from volker3204@xxxxxxxxxxxxxxx 2007-05-01 04:32 MST -------
I copied xorg.conf before I ran sax2 again to fix things up. Differences are:
- DisplaySize 345 259
+ DisplaySize 305 229
- Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806
+ Modeline "1024x768" 76.16 1024 1088 1200 1360 768 785 788 840
+ Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625
- Modes "1024x768"
+ Modes "1024x768" "800x600"
[several times]
+ Screen 0
The pixel number was there, but the timing was wrong. I had increased vertical
from 60 to 70Hz, the 70 was in the monitor model name identifier. (sax2 the 2nd
time also added all the 800x600 settings, but that's not part of the problem.
The DisplaySize change resulted from a screen diagonal adjustment; I usually
have to set about 14.1-15 inch for this 17 inch CRT to get usable application
font sizes. It defaulted to about 20 though - without DDI any default will of
course be wrong.)
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
volker3204@xxxxxxxxxxxxxxx changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEEDINFO |NEW
Info Provider|volker3204@xxxxxxxxxxxxxxx |
------- Comment #2 from volker3204@xxxxxxxxxxxxxxx 2007-05-01 04:32 MST -------
I copied xorg.conf before I ran sax2 again to fix things up. Differences are:
- DisplaySize 345 259
+ DisplaySize 305 229
- Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806
+ Modeline "1024x768" 76.16 1024 1088 1200 1360 768 785 788 840
+ Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625
- Modes "1024x768"
+ Modes "1024x768" "800x600"
[several times]
+ Screen 0
The pixel number was there, but the timing was wrong. I had increased vertical
from 60 to 70Hz, the 70 was in the monitor model name identifier. (sax2 the 2nd
time also added all the 800x600 settings, but that's not part of the problem.
The DisplaySize change resulted from a screen diagonal adjustment; I usually
have to set about 14.1-15 inch for this 17 inch CRT to get usable application
font sizes. It defaulted to about 20 though - without DDI any default will of
course be wrong.)
--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
| < Previous | Next > |