https://bugzilla.novell.com/show_bug.cgi?id=250659 Summary: camera device nodes aren't getting acls set correctly Product: openSUSE 10.3 Version: Alpha 1plus Platform: Other OS/Version: Other Status: NEW Severity: Normal Priority: P5 - None Component: Basesystem AssignedTo: lnussel@novell.com ReportedBy: crivera@novell.com QAContact: qa@suse.de CC: crivera@novell.com I'm unable to connect to my camera using f-spot or digikam. This looks like a hal-resmgr problem. The camera device node doesn't have acls set for the user. There is currently a hack in hal-resmgr that adds a property, resmgr.hack_add_usbraw_as, to the root camera device and uses this info to copy properties from the camera interface to the usbraw device exposed by the camera. This relies on the camera interface showing up before the usbraw device, which is what happens in SLED10. This is broken in 10.3 because the usbraw device is being detected before the camera interface so the hal-resmgr callouts never get added to the usbraw device and the acls never get set. Some output for hal-device-manager showing this: DeviceAdded, udi=/org/freedesktop/Hal/devices/usb_device_4a9_3070_noserial DeviceAdded, udi=/org/freedesktop/Hal/devices/usb_device_4a9_3070_noserial_usbraw PropertyModified, device=/org/freedesktop/Hal/devices/usb_device_4a9_3070_noserial key=resmgr.hack_add_usbraw_as, rem=0, add=1 value=/org/freedesktop/Hal/devices/usb_device_4a9_3070_noserial_if0 DeviceAdded, udi=/org/freedesktop/Hal/devices/usb_device_4a9_3070_noserial_if0 -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.