https://bugzilla.novell.com/show_bug.cgi?id=241098 Summary: sax2 fails to configure external vga out correctly Product: openSUSE 10.2 Version: Final Platform: 32bit OS/Version: Linux Status: NEW Severity: Major Priority: P5 - None Component: SaX2 AssignedTo: ms@novell.com ReportedBy: reitenbach@rapideye.de QAContact: qa@suse.de the problem is more or less described here: https://bugzilla.novell.com/show_bug.cgi?id=235127 as this bug was closed, as a duplicate, and the original bug was closed as fixed too, I installed the sax patch, and tried to reconfigure the screen. the LCD is setup correctly, 1680x1050, and the external vga connector is configured with sax to be 1024x768. But when connecting the projector to it, the screen is 1024x1024@60Hz, on the left side, about 3-5 centimeters are missing (some contents I can see on the notebook lcd) in /etc/sysconfig/videobios, the following is configured: VIDEOBIOS_PARAMETERS="30 1680 1050" with the above line, 915resolution -l shows the following: Intel 800/900 Series VBIOS Hack : version 0.5.2 Chipset: 945GM965G BIOS: TYPE 1 Mode Table Offset: $C0000 + $269 Mode Table Entries: 36 Mode 30 : 1680x1050, 8 bits/pixel Mode 32 : 800x600, 8 bits/pixel Mode 34 : 1024x768, 8 bits/pixel Mode 38 : 1280x1024, 8 bits/pixel Mode 3a : 1600x1200, 8 bits/pixel Mode 3c : 1920x1440, 8 bits/pixel Mode 41 : 1680x1050, 16 bits/pixel Mode 43 : 800x600, 16 bits/pixel Mode 45 : 1024x768, 16 bits/pixel Mode 49 : 1280x1024, 16 bits/pixel Mode 4b : 1600x1200, 16 bits/pixel Mode 4d : 1920x1440, 16 bits/pixel Mode 50 : 1680x1050, 32 bits/pixel Mode 52 : 800x600, 32 bits/pixel Mode 54 : 1024x768, 32 bits/pixel Mode 58 : 1280x1024, 32 bits/pixel Mode 5a : 1600x1200, 32 bits/pixel Mode 5c : 1920x1440, 32 bits/pixel expected behaviour: the external vga outlet should use the configured 1024x768@60Hz. -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.