https://bugzilla.novell.com/show_bug.cgi?id=227464 mszick@morethan.org changed: What |Removed |Added ---------------------------------------------------------------------------- Status|NEEDINFO |NEW Info Provider|mszick@morethan.org | ------- Comment #4 from mszick@morethan.org 2006-12-21 09:47 MST ------- SaX: initializing please wait SaX: your current configuration will not be read in SaX: no X-Server running SaX: will start own server if needed SaX: ups lost card during probing... abort SaX: something went wrong while X was called with -probeonly SaX: try to call 'sax2 -p' and select a single device ? abort prompt# sax2 -p Chip: 0 is -> Intel I815 00:02:0 0x8086 0x1132 PCI i810 Chip: 1 is -> ATI 3D Rage Pro 215GP 01:02:0 0x1002 0x4750 AGP ati (Which is correct by the way) Monitor which returns DDC is on Chip 1 Motherboard BIOS : PhoenixBIOS Version 4.0 Release 6.0 HP Build: 04/11/01 9:10:45 IP.01.07US Settings: Video Primary: PCI Multi-Display: Enabled BIOS does not allow 'Multi-Display' to be enabled unless the non-embedded display is set as the BIOS primary. M$-WindowsXP will use either card/monitor as the primary monitor in either single or dual head display modes. (I.E: it switches to the card and non-DDC monitor when the graphic drivers load.) SaX.log: /************* SaX2 log : SaX2 version 8.1 - SVN Release: 1.49 2003/03/17 ************** SVN RELEASE : 1254 : DESCRIPTION : X11 configuration log file to collect information : about detection, startup and configuration. : There are three parts of logging: : --- : 1) INIT ( detection, 3D ) : 2) STARTUP ( xorg.conf, X11 log, glxinfo ) : 3) CONFIG ( config actions ) : --- : VERSION : SaX2 compiled for: [openSUSE 10.2 (i586)] PARAMETER : -r -a -r : LOG DATE : Thu Dec 21 10:18:29 CST 2006 *************/ ============================ Framebuffer Info: ---------------------------- Framebuffer not active 21-Dec 10:18:31 <I> Initializing... 21-Dec 10:18:34 <I> [ Sysp: Mouse detection data Mouse0 => Protocol : explorerps/2 Mouse0 => Device : /dev/input/mice Mouse0 => Buttons : 7 Mouse0 => Wheel : 1 Mouse0 => Emulate : 0 Mouse0 => Name : GenPS/2 Genius Mouse Mouse0 => VendorID : 0x0210 Mouse0 => DeviceID : 0x0015 Mouse0 => Profile : <undefined> Mouse0 => RealDevice : <undefined> Mouse0 => NutShell : 0 ] 21-Dec 10:18:35 <I> [ Sysp: Keyboard detection data Keyboard0 => XkbModel : pc104 Keyboard0 => XkbLayout : us Keyboard0 => Name : AT Translated Set 2 keyboard Keyboard0 => VendorID : 0x0211 Keyboard0 => DeviceID : 0x0001 Keyboard0 => Profile : <undefined> Keyboard0 => RealDevice : /dev/input/event1 ] 21-Dec 10:18:58 <I> [ Sysp: Server detection data Card0 => DomainId : 0x0 Card0 => BusId : 0x1 Card0 => SlotId : 0x02 Card0 => FuncId : 0x0 Card0 => Vendor : ATI Card0 => Device : 3D Rage Pro 215GP Card0 => VID : 0x1002 Card0 => DID : 0x4750 Card0 => Module : ati Card0 => BusType : AGP Card0 => Detected : 2 Card0 => Flag : DEFAULT Card0 => SUB-VID : 0x1002 Card0 => SUB-DID : 0x0080 Card0 => DrvProfile : <undefined> Card1 => DomainId : 0x0 Card1 => BusId : 0x0 Card1 => SlotId : 0x02 Card1 => FuncId : 0x0 Card1 => Vendor : Intel Card1 => Device : I815 Card1 => VID : 0x8086 Card1 => DID : 0x1132 Card1 => Module : i810 Card1 => BusType : PCI Card1 => Detected : 2 Card1 => Flag : DEFAULT Card1 => SUB-VID : 0x103c Card1 => SUB-DID : 0x1245 Card1 => DrvProfile : Depth24,NoDDC ] 21-Dec 10:19:03 <I> [ Sysp: XStuff detection data SaX: ups lost card during probing... abort ] What next to test? Mike -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.