https://bugzilla.novell.com/show_bug.cgi?id=230194 Summary: usb stick doesnt show up as a drive anymore Product: openSUSE 10.2 Version: Final Platform: x86-64 OS/Version: SuSE Other Status: NEW Severity: Normal Priority: P5 - None Component: Hotplug AssignedTo: ihno@novell.com ReportedBy: admin@eregion.de QAContact: qa@suse.de I have this 1gig usb stick which used to work just fine on 10.0 and 10.1, but now on a different box (dell optiplex gs620 running 10.2-x86_64) it appears in dmesg, is manually mountable and usable, but doesnt show up by itself, neither with that "new drive detected" popup message, nor in sysinfo:/ in kde. dmesg output: usb 1-8: new high speed USB device using ehci_hcd and address 6 usb 1-8: new device found, idVendor=090c, idProduct=1000 usb 1-8: new device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-8: Product: USBDrive usb 1-8: Manufacturer: LG usb 1-8: SerialNumber: AA04012700014944 usb 1-8: configuration #1 chosen from 1 choice scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning Vendor: LG Model: USBDrive Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sdb: 1981440 512-byte hdwr sectors (1014 MB) sdb: Write Protect is off sdb: Mode Sense: 43 00 00 00 sdb: assuming drive cache: write through SCSI device sdb: 1981440 512-byte hdwr sectors (1014 MB) sdb: Write Protect is off sdb: Mode Sense: 43 00 00 00 sdb: assuming drive cache: write through sdb: sdb1 sd 5:0:0:0: Attached scsi removable disk sdb sd 5:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete lsusb -v output: mhomann@mhomann-linux:~> sudo lsusb -d 090c:1000 -v Bus 001 Device 006: ID 090c:1000 Feiya Technology Corp. Memory Bar Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x090c Feiya Technology Corp. idProduct 0x1000 Memory Bar bcdDevice 11.00 iManufacturer 1 LG iProduct 2 USBDrive iSerial 3 AA04012700014944 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 255 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 255 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) mhomann@mhomann-linux:~> software versions involved: suse 10.2 (boxed), kde 3.5.5 (buildtree) -- Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.