Mailinglist Archive: opensuse-bugs (14787 mails)

[bugzilla_noreply@xxxxxxxxxx]

https://bugzilla.novell.com/show_bug.cgi?id=220286





------- Comment #7 from wolfgang.kropff@xxxxxx  2006-11-22 12:36 MST -------
After loading the 'ahci'-module the installation started and the first part was
successfull. The reboot of the system ends with the following messages:
"...
Loading ahci
ahci 0000:00:12.0 AHCI 0001.0100 32 slots4 ports 3Gbps 0xf impl IDE mode
ahci 0000:00:12.0 flags: 64bit ncq ilck pm led clo pmp pio slumport
ata1: SATA max UDMA/133 cmd 0xFFFFC200001C100 C+1 0x0 bmdma 0x0 irq 177
ata2: SATA max UDMA/133 cmd 0xFFFFC200001C180 C+1 0x0 bmdma 0x0 irq 177
ata3: SATA max UDMA/133 cmd 0xFFFFC200001C200 C+1 0x0 bmdma 0x0 irq 177
ata4: SATA max UDMA/133 cmd 0xFFFFC200001C280 C+1 0x0 bmdma 0x0 irq 177
scsi: ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7 max, UDMA/133, 48839718 sectors: LBAU8 NCQ (depth 31/32)
ata1.00: ata1: dev0 multi count 16
ata1.00: configued for UDMA/133
.
.
.
scsi3: ahci
ata4: SATA link down (SStatus 0 SControl 300)
    Vendor: ATA               Model: WDC WD 2500JS055N         Rev: 10.0
    Type: direct access                                        ANSISCSI:
revision 05
SCSI device sda: 48839718 512-kbyte hdwr sectors (250059 MB)
sda: Write Protect off
.
.
.
SCSI device sda: device cache: write back
    sda: sda1 sda2 ....
sd 0:0:0:0: Attached scsi disk sda
.
.
.
Loading ext3
resume device /dev/sdg7 not found (ignored)
Waiting for device /dev/sdg8 to appear ................................. not
found -- exiting to /bin/sh
sh: no job control in this shell"

The keyboard was inactive, so I can not attach any output of dmesg or hwinfo of
the beta2.


-- 
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.