Mailinglist Archive: opensuse-bugs (14787 mails)

< Previous Next >
[Bug 216901] New: No Sound With Suse 10.1 Using Device CM8738/C3DX PCI !! New Installation, no Upgrade !!
  • From: bugzilla_noreply@xxxxxxxxxx
  • Date: Wed, 1 Nov 2006 01:15:46 -0700 (MST)
  • Message-id: <bug-216901-21960@xxxxxxxxxxxxxxxxxxxxxxxxx/>
https://bugzilla.novell.com/show_bug.cgi?id=216901

Summary: No Sound With Suse 10.1 Using Device CM8738/C3DX PCI !!
New Installation, no Upgrade !!
Product: SUSE Linux 10.1
Version: Final
Platform: i686
OS/Version: Other
Status: NEW
Severity: Normal
Priority: P5 - None
Component: YaST2
AssignedTo: bnc-team-screening@xxxxxxxxxxxxxxxxxxxxxx
ReportedBy: diprob@xxxxxxxxx
QAContact: jsrain@xxxxxxxxxx


I am running 10.1 in parallel with an Suse 9.3 Installation. With Suse 9.3
sound works fine. With Suse 10.1 I was not able to get any sound out of my
speakers.
The error looks similar to bug 127738 (Suse 10.0) however none of the described
work arounds made any difference.

----------------------------------------------------------------
! As already said, it was a parallel installation and no update !
! and none of the steps described in 127738 show any succes !
-----------------------------------------------------------------

Installation with yast does not show any error message however the test button
does not deliver any sound. I tried alsaconf and alsamixer as well. Messages
show succesful restart of the sound driver but there wasn`t any success either.


Please find some information below:

hwinfo --sound:
14: PCI 0b.0: 0401 Multimedia audio controller
[Created at pci.300]
UDI: /org/freedesktop/Hal/devices/pci_13f6_111
Unique ID: gZD2.leFtcOMtGx0
SysFS ID: /devices/pci0000:00/0000:00:0b.0
SysFS BusID: 0000:00:0b.0
Hardware Class: sound
Model: "C-Media Electronics CMI8738/C3DX PCI Audio Device"
Vendor: pci 0x13f6 "C-Media Electronics Inc"
Device: pci 0x0111 "CM8738"
SubVendor: pci 0x13f6 "C-Media Electronics Inc"
SubDevice: pci 0x0111 "CMI8738/C3DX PCI Audio Device"
Revision: 0x10
Driver: "C-Media PCI"
I/O Ports: 0xe400-0xe4ff (rw)
IRQ: 185 (468 events)
Module Alias: "pci:v000013F6d00000111sv000013F6sd00000111bc04sc01i00"
Driver Info #0:
Driver Status: cmpci is not active
Driver Activation Cmd: "modprobe cmpci"
Driver Info #1:
Driver Status: snd_cmipci is active
Driver Activation Cmd: "modprobe snd_cmipci"
Config Status: cfg=yes, avail=yes, need=no, active=unknown

File: hwcfg-bus-pci-0000:00:0b.0
MODULE='snd-cmipci'
STARTMODE='auto'


file: hwcfg-bus-pci-0000:00:0b.0
MODULE='via-rhine'
MODULE_OPTIONS=''
STARTMODE='auto'

file: modprobe.d/sound
options snd-cmipci enable=1 index=0
# gZD2.leFtcOMtGx0:CMI8738/C3DX PCI Audio Device
alias snd-card-0 snd-cmipci

I did try comment #8 but nothing happened. I deleted /etc/modprobe.d/sound and
rebooted. The card is still shown on yast but needs to be configured.
Configuration seems to be successful but the test button does not deliver any
sound. Is there any dependancy with KDE Sound system? KDE settings show: Sound
system deactivated.
My system has an additional on board sound system (AC97) but due to bad
experiences in the past I disabled it in BIOS leaving only the PCI-Card active.


--
Configure bugmail: https://bugzilla.novell.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

< Previous Next >
Follow Ups