Mailinglist Archive: opensuse-autoinstall (41 mails)
| < Previous | Next > |
Re: [opensuse-autoinstall] autoinstallation hangs at reboot
- From: m.frerichs <m.frerichs@xxxxxxxxxxxxx>
- Date: Thu, 29 Mar 2012 12:41:24 +0200
- Message-id: <4F743C54.9070606@fz-juelich.de>
Hello ,
hurra , i succeeded to autoinstall a 12.1-client
after i explicitly umounted some filesystems at the end of post.sh
which i had mounted in it .
( i did this withount umount for instalaltion of 11.3 without irritation)
But many questions remain because of error messages in my xml-file, see
downwards.
In my script after installation the addition of many repos and " zypper
in " of hundreds
of rpms took a long , long time of several hours ,
which normally was executed in less then 1 hour in 11.3.
I shortened this process by adding
ipv6.disable=1 in the bootoptions.
Where can i lay this down in the xml-File and in /etc/sysconfig ?
Many thanks to Christopher "m4z" Holm for his hints.
Marianne Frerichs
Have you tried both 2) removing the systemd-sysvinit and 3) including
the chroot-script to "insserv autoyast" at the same time?
yes , both was configured at the same time
yast2_basis
i installed this:
<pattern>yast2_basis</pattern>
<pattern>yast2_basis-32bit</pattern>
<pattern>yast2_install_wf</pattern>
<pattern>yast2_install_wf-32bit</pattern>
<pattern>kde4_yast</pattern>
<pattern>kde4_yast-32bit</pattern>
<package>yast2-schema</package>
<package>autoyast2</package>
<package>yast2-slp</package>
<package>yast2-bootloader</package>
<package>yast2-online-update-configuration</package>
<package>yast2-firstboot</package>
even if i succeed in installation i get error messages in my xml-File
* Section bootloader: Error
* Section chroot-scripts: Error
* Section deploy_image: OK
* Section general: Error
* Section groups: OK
* Section keyboard: OK
* Section language: OK
* Section login_settings: OK
* Section networking: Error
* Section nfs: OK
* Section nis: OK
* Section partitioning: Error
* Section report: OK
* Section runlevels: Error
* Section scripts: OK
* Section software: Error
* Section sysconfig: OK
* Section timezone: OK
* Section user_defaults: Error
* Section users: OK
* Section x11: Error
/usr/bin/xmllint --noout --relaxng
/usr/share/YaST2/schema/autoyast/rng/profile.rng
/tmp/YaST2-13674-aSXamr/bootloader.xml
/tmp/YaST2-13674-aSXamr/bootloader.xml:4: element bootloader: Relax-NG
validity error : Element profile has extra content: bootloader
/tmp/YaST2-13674-aSXamr/bootloader.xml fails to validate
and same for all "error" sections
There are no former explanations and i can see nothing wrong in my
appended XML-File
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzender des Aufsichtsrats: MinDir Dr. Karl Eugen Huthmacher
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Kennen Sie schon unsere app? http://www.fz-juelich.de/app
<?xml version="1.0"?>
<!DOCTYPE profile SYSTEM "/usr/share/autoinstall/profile.dtd">
<profile xmlns="http://www.suse.com/1.0/yast2ns";
xmlns:config="http://www.suse.com/1.0/configns";>
<networking>
<dns>
<dhcp_hostname config:type="boolean">true</dhcp_hostname>
<domain></domain>
<hostname>zamxxxx</hostname>
<searchlist config:type="list">
<search>xxxxxxxxxxxxx</search>
</searchlist>
<nameservers config:type="list">
<nameserver>xxxxxxxxxxx</nameserver>
</nameservers>
<options>ndots:2</options>
</dns>
<interfaces config:type="list">
<interface>
<bootproto>dhcp</bootproto>
<device>eth0</device>
<module>pcnet32</module>
<startmode>onboot</startmode>
</interface>
</interfaces>
</networking>
<nis>
<nis_domain>xxxxxxx</nis_domain>
<nis_servers config:type="list">
<nis_server>xxxxxxxxxxxxxxxxxxxxxxxxx</nis_server>
</nis_servers>
<start_autofs config:type="boolean">true</start_autofs>
<start_nis config:type="boolean">true</start_nis>
</nis>
<nfs>
<enable_nfs4 config:type="boolean">true</enable_nfs4>
<idmapd_domain>xxxxxxx</idmapd_domain>
<nfs_entries config:type="list">
<nfs_entry>
<mount_point>/home</mount_point>
<nfs_options>defaults</nfs_options>
<server_path>xxxxxxxxxxxxxxxxxxxxxxxx:/export/zam1/home</server_path>
<vfstype>nfs</vfstype>
</nfs_entry>
<nfs_entry>
<mount_point>/usr/local</mount_point>
<nfs_options>ro</nfs_options>
<server_path>xxxxxxxxxxxxxxxxxxxxxxxx:/export/_usr_local/linux_12.1</server_path>
<vfstype>nfs</vfstype>
</nfs_entry>
</nfs_entries>
</nfs>
<runlevels>
<default>5</default>
<services config:type="list">
<service>
<service_name>autofs</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>ntp</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>ypbind</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>smb</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>sshd</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>nfs</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>nfslock</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>atd</service_name>
<service_start>2 3 5</service_start>
</service>
</services>
</runlevels>
<timezone>
<hwclock>localtime</hwclock>
<timezone>Europe/Berlin</timezone>
</timezone>
<keyboard>
<keymap>german</keymap>
</keyboard>
<language>
<language>de_DE</language>
<languages></languages>
</language>
<chroot-scripts config:type="list">
<script>
<chrooted config:type="boolean">true</chrooted>
<interpreter>shell</interpreter>
<source><![CDATA[
insserv autoyast
]]></source>
</script>
</chroot-scripts>
<scripts>
<post-scripts config:type="list">
<script>
<filename>post.sh</filename>
<interpreter>shell</interpreter>
<source>
<![CDATA[
mkdir -p /export/SuSE-release/12.1
mount -o nolock xxxxxxxxxxxxxxxxxxxxxxxxxxx:/SuSE-release/12.1
/export/SuSE-release/12.1
mkdir -p /export/suse/12.1
mount -o nolock linuxris.zam.kfa-juelich.de:/export/suse/12.1
/export/suse/12.1
mount | grep export
/export/suse/12.1/FZJ_CONFIG/FZJ_post_test.sh zam1259 zamaxp1
xxxxxxxxxxxxxxxxxxxxxxxx m.frerichs@xxxxxxxxxxxxx 2>&1 | tee -a
/var/adm/autoinstall/logs/post.sh.log
umount /export/SuSE-release/12.1
umount /export/suse/12.1
rm -rf /export/SuSE-release /export/suse
]]>
</source>
</script>
</post-scripts>
</scripts>
<sysconfig config:type="list">
<sysconfig_entry>
<sysconfig_path>ntp</sysconfig_path>
<sysconfig_key>XNTPD_INITIAL_NTPDATE</sysconfig_key>
<sysconfig_value>XXX</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/network/config</sysconfig_path>
<sysconfig_key>MODIFY_RESOLV_CONF_DYNAMICALLY</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/network/dhcp</sysconfig_path>
<sysconfig_key>DHCLIENT_MODIFY_RESOLV_CONF</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/network/dhcp</sysconfig_path>
<sysconfig_key>WRITE_HOSTNAME_TO_HOSTS</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/network/dhcp</sysconfig_path>
<sysconfig_key>DHCLIENT_SET_HOSTNAME</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/kernel</sysconfig_path>
<sysconfig_key>MODULES_LOADED_ON_BOOT</sysconfig_key>
<sysconfig_value>ip_conntrack_ftp</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>windowmanager</sysconfig_path>
<sysconfig_key>DEFAULT_WM</sysconfig_key>
<sysconfig_value>kde</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>displaymanager</sysconfig_path>
<sysconfig_key>DISPLAYMANAGER</sysconfig_key>
<sysconfig_value>kdm</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>displaymanager</sysconfig_path>
<sysconfig_key>DISPLAYMANAGER_KDM_THEME</sysconfig_key>
<sysconfig_value>KDE</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>syslog</sysconfig_path>
<sysconfig_key>SYSLOG_DAEMON</sysconfig_key>
<sysconfig_value>syslog-ng</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>postfix</sysconfig_path>
<sysconfig_key>POSTFIX_ADD_MESSAGE_SIZE_LIMIT</sysconfig_key>
<sysconfig_value>52428800</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_key>YAST_KEYBOARD</sysconfig_key>
<sysconfig_path>/etc/sysconfig/keyboard</sysconfig_path>
<sysconfig_value>de_DE</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>boot</sysconfig_path>
<sysconfig_key>RUN_PARALLEL</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
</sysconfig>
<users config:type="list">
<user>
<encrypted config:type="boolean">true</encrypted>
<user_password>xxxxxxxxxxxxx</user_password>
<username>root</username>
</user>
</users>
<x11>
<display_manager>kdm</display_manager>
</x11>
<bootloader>
<activate config:type="boolean">true</activate>
<linear config:type="boolean">false</linear>
<location>mbr</location>
</bootloader>
<general>
<mode>
<confirm config:type="boolean">false</confirm>
<halt config:type="boolean">false</halt>
<forceboot config:type="boolean">true</forceboot>
<reboot config:type="boolean">true</reboot>
<final_reboot config:type="boolean">true</final_reboot>
</mode>
</general>
<partitioning config:type="list">
<drive>
<device>/dev/sda</device>
<partitions config:type="list">
<partition>
<partition_nr config:type="integer">1</partition_nr>
<create config:type="boolean">false</create>
<format config:type="boolean">true</format>
<mount>/boot</mount>
</partition>
<partition>
<partition_nr config:type="integer">2</partition_nr>
<create config:type="boolean">false</create>
<format config:type="boolean">true</format>
<mount>swap</mount>
</partition>
<partition>
<partition_nr config:type="integer">3</partition_nr>
<create config:type="boolean">false</create>
<format config:type="boolean">true</format>
<mount>/</mount>
</partition>
<partition>
<partition_nr config:type="integer">4</partition_nr>
<create config:type="boolean">false</create>
<format config:type="boolean">false</format>
<mount>/private</mount>
</partition>
</partitions>
</drive>
</partitioning>
<report>
<errors>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</errors>
<messages>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">3</timeout>
</messages>
<warnings>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">3</timeout>
</warnings>
</report>
<add-on>
<add_on_products config:type="list">
<listentry>
<!--
<media_url>nfs://xxxxxxxxxxxxxxxxxxxxxxxxxxx/export/SuSE-release/12.1/DVD2</media_url>
<product_dir>/</product_dir>
<ask_on_error config:type="boolean">true</ask_on_error>
<name>DVD2 12.1 Non OSS</name> -->
</listentry>
</add_on_products>
</add-on>
<software>
<!-- if nothing is defined , kernel pae is choosed if suitable -->
<kernel></kernel>
<patterns config:type="list">
<pattern>base</pattern>
<pattern>32bit</pattern>
<pattern>base-32bit</pattern>
<pattern>enhanced_base-32bit</pattern>
<pattern>console</pattern>
<pattern>console-32bit</pattern>
<pattern>x11</pattern>
<pattern>x11-32bit</pattern>
<pattern>x11_opt</pattern>
<pattern>x11_opt-32bit</pattern>
<pattern>non_oss</pattern>
<pattern>yast2_basis</pattern>
<pattern>yast2_basis-32bit</pattern>
<pattern>yast2_install_wf</pattern>
<pattern>yast2_install_wf-32bit</pattern>
<pattern>fonts</pattern>
<pattern>fonts-32bit</pattern>
<pattern>fonts_opt</pattern>
<pattern>fonts_opt-32bit</pattern>
<pattern>kde</pattern>
<pattern>kde4</pattern>
<pattern>kde4_admin</pattern>
<pattern>kde4_basis</pattern>
<pattern>kde4_ide</pattern>
<pattern>kde4_imaging</pattern>
<pattern>kde4_internet</pattern>
<pattern>kde4_yast</pattern>
<pattern>kde4-32bit</pattern>
<pattern>kde4_admin-32bit</pattern>
<pattern>kde4_basis-32bit</pattern>
<pattern>kde4_ide-32bit</pattern>
<pattern>kde4_internet-32bit</pattern>
<pattern>kde4_yast-32bit</pattern>
<pattern>non_oss</pattern>
<pattern>non_oss-32bit</pattern>
<pattern>sw_management</pattern>
<pattern>sw_management_kde4</pattern>
<pattern>sw_management-32bit</pattern>
<pattern>sw_management_kde4-32bit</pattern>
</patterns>
<packages config:type="list">
<package>libEMF</package>
<package>ddskk</package>
<package>gjiten</package>
<package>xml-commons-apis</package>
<package>xml-commons-resolver</package>
<package>alsa-firmware</package>
<package>reiserfs</package>
<package>yast2-schema</package>
<package>autoyast2</package>
<package>yast2-slp</package>
<package>yast2-bootloader</package>
<package>yast2-online-update-configuration</package>
<package>yast2-firstboot</package>
<package>libqt4-qt3support</package>
<package>kexec-tools</package>
<package>bind-libs-32bit</package>
<package>libstdc++33-32bit</package>
<package>libsensors4-32bit</package>
<package>libqt4-qt3support-32bit</package>
</packages>
<remove-packages config:type="list">
<!-- This way, sysvinit-init will be installed and used. -->
<package>systemd-sysvinit</package>
<package>apper</package>
<package>libpackagekit-qt2-2</package>
<package>PackageKit-gstreamer-plugin</package>
<package>PackageKit-browser-plugin</package>
<package>PackageKit-branding-openSUSE</package>
<package>PackageKit</package>
<package>libpackagekit-glib2-14</package>
</remove-packages>
<!-- do after first reboot in stage 2 -->
<post-packages config:type="list">
</post-packages>
</software>
</profile>
hurra , i succeeded to autoinstall a 12.1-client
after i explicitly umounted some filesystems at the end of post.sh
which i had mounted in it .
( i did this withount umount for instalaltion of 11.3 without irritation)
But many questions remain because of error messages in my xml-file, see
downwards.
In my script after installation the addition of many repos and " zypper
in " of hundreds
of rpms took a long , long time of several hours ,
which normally was executed in less then 1 hour in 11.3.
I shortened this process by adding
ipv6.disable=1 in the bootoptions.
Where can i lay this down in the xml-File and in /etc/sysconfig ?
Many thanks to Christopher "m4z" Holm for his hints.
Marianne Frerichs
Have you tried both 2) removing the systemd-sysvinit and 3) including
the chroot-script to "insserv autoyast" at the same time?
yes , both was configured at the same time
Are you using a particular large number of remove-packages, or aI normally expect that all neccessary functions are collected in
particular small number of patterns? (Maybe you are still missing one
of the yast2* packages that provide the missing functionality.)
yast2_basis
i installed this:
<pattern>yast2_basis</pattern>
<pattern>yast2_basis-32bit</pattern>
<pattern>yast2_install_wf</pattern>
<pattern>yast2_install_wf-32bit</pattern>
<pattern>kde4_yast</pattern>
<pattern>kde4_yast-32bit</pattern>
<package>yast2-schema</package>
<package>autoyast2</package>
<package>yast2-slp</package>
<package>yast2-bootloader</package>
<package>yast2-online-update-configuration</package>
<package>yast2-firstboot</package>
Have you verified your profile? To do so, you canit is curious:
1. run "yast autoyast" on your "profile server",
2. open your profile, and then
3. run "Tools" -> "Check Validity of Profile" (semi-useful because
there are a lot of false positives, YMMV) and
4. check your software selection for conflicts or missing packages
under "Group: Software" -> "Package Selection" -> "Edit" ->
"Dependencies" -> "Check Dependencies Now", and finally
5. (I highly recommend this!) save your profile to another filename
and diff it against the file you loaded, to make sure your syntax is
up-to-date.
even if i succeed in installation i get error messages in my xml-File
* Section bootloader: Error
* Section chroot-scripts: Error
* Section deploy_image: OK
* Section general: Error
* Section groups: OK
* Section keyboard: OK
* Section language: OK
* Section login_settings: OK
* Section networking: Error
* Section nfs: OK
* Section nis: OK
* Section partitioning: Error
* Section report: OK
* Section runlevels: Error
* Section scripts: OK
* Section software: Error
* Section sysconfig: OK
* Section timezone: OK
* Section user_defaults: Error
* Section users: OK
* Section x11: Error
/usr/bin/xmllint --noout --relaxng
/usr/share/YaST2/schema/autoyast/rng/profile.rng
/tmp/YaST2-13674-aSXamr/bootloader.xml
/tmp/YaST2-13674-aSXamr/bootloader.xml:4: element bootloader: Relax-NG
validity error : Element profile has extra content: bootloader
/tmp/YaST2-13674-aSXamr/bootloader.xml fails to validate
and same for all "error" sections
There are no former explanations and i can see nothing wrong in my
appended XML-File
(If you had package conflicts, you can also check this afterThere was no such file
installation in /var/log/YaST2/badlist)
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Forschungszentrum Juelich GmbH
52425 Juelich
Sitz der Gesellschaft: Juelich
Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498
Vorsitzender des Aufsichtsrats: MinDir Dr. Karl Eugen Huthmacher
Geschaeftsfuehrung: Prof. Dr. Achim Bachem (Vorsitzender),
Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt,
Prof. Dr. Sebastian M. Schmidt
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Kennen Sie schon unsere app? http://www.fz-juelich.de/app
<?xml version="1.0"?>
<!DOCTYPE profile SYSTEM "/usr/share/autoinstall/profile.dtd">
<profile xmlns="http://www.suse.com/1.0/yast2ns";
xmlns:config="http://www.suse.com/1.0/configns";>
<networking>
<dns>
<dhcp_hostname config:type="boolean">true</dhcp_hostname>
<domain></domain>
<hostname>zamxxxx</hostname>
<searchlist config:type="list">
<search>xxxxxxxxxxxxx</search>
</searchlist>
<nameservers config:type="list">
<nameserver>xxxxxxxxxxx</nameserver>
</nameservers>
<options>ndots:2</options>
</dns>
<interfaces config:type="list">
<interface>
<bootproto>dhcp</bootproto>
<device>eth0</device>
<module>pcnet32</module>
<startmode>onboot</startmode>
</interface>
</interfaces>
</networking>
<nis>
<nis_domain>xxxxxxx</nis_domain>
<nis_servers config:type="list">
<nis_server>xxxxxxxxxxxxxxxxxxxxxxxxx</nis_server>
</nis_servers>
<start_autofs config:type="boolean">true</start_autofs>
<start_nis config:type="boolean">true</start_nis>
</nis>
<nfs>
<enable_nfs4 config:type="boolean">true</enable_nfs4>
<idmapd_domain>xxxxxxx</idmapd_domain>
<nfs_entries config:type="list">
<nfs_entry>
<mount_point>/home</mount_point>
<nfs_options>defaults</nfs_options>
<server_path>xxxxxxxxxxxxxxxxxxxxxxxx:/export/zam1/home</server_path>
<vfstype>nfs</vfstype>
</nfs_entry>
<nfs_entry>
<mount_point>/usr/local</mount_point>
<nfs_options>ro</nfs_options>
<server_path>xxxxxxxxxxxxxxxxxxxxxxxx:/export/_usr_local/linux_12.1</server_path>
<vfstype>nfs</vfstype>
</nfs_entry>
</nfs_entries>
</nfs>
<runlevels>
<default>5</default>
<services config:type="list">
<service>
<service_name>autofs</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>ntp</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>ypbind</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>smb</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>sshd</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>nfs</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>nfslock</service_name>
<service_start>3 5</service_start>
</service>
<service>
<service_name>atd</service_name>
<service_start>2 3 5</service_start>
</service>
</services>
</runlevels>
<timezone>
<hwclock>localtime</hwclock>
<timezone>Europe/Berlin</timezone>
</timezone>
<keyboard>
<keymap>german</keymap>
</keyboard>
<language>
<language>de_DE</language>
<languages></languages>
</language>
<chroot-scripts config:type="list">
<script>
<chrooted config:type="boolean">true</chrooted>
<interpreter>shell</interpreter>
<source><![CDATA[
insserv autoyast
]]></source>
</script>
</chroot-scripts>
<scripts>
<post-scripts config:type="list">
<script>
<filename>post.sh</filename>
<interpreter>shell</interpreter>
<source>
<![CDATA[
mkdir -p /export/SuSE-release/12.1
mount -o nolock xxxxxxxxxxxxxxxxxxxxxxxxxxx:/SuSE-release/12.1
/export/SuSE-release/12.1
mkdir -p /export/suse/12.1
mount -o nolock linuxris.zam.kfa-juelich.de:/export/suse/12.1
/export/suse/12.1
mount | grep export
/export/suse/12.1/FZJ_CONFIG/FZJ_post_test.sh zam1259 zamaxp1
xxxxxxxxxxxxxxxxxxxxxxxx m.frerichs@xxxxxxxxxxxxx 2>&1 | tee -a
/var/adm/autoinstall/logs/post.sh.log
umount /export/SuSE-release/12.1
umount /export/suse/12.1
rm -rf /export/SuSE-release /export/suse
]]>
</source>
</script>
</post-scripts>
</scripts>
<sysconfig config:type="list">
<sysconfig_entry>
<sysconfig_path>ntp</sysconfig_path>
<sysconfig_key>XNTPD_INITIAL_NTPDATE</sysconfig_key>
<sysconfig_value>XXX</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/network/config</sysconfig_path>
<sysconfig_key>MODIFY_RESOLV_CONF_DYNAMICALLY</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/network/dhcp</sysconfig_path>
<sysconfig_key>DHCLIENT_MODIFY_RESOLV_CONF</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/network/dhcp</sysconfig_path>
<sysconfig_key>WRITE_HOSTNAME_TO_HOSTS</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/network/dhcp</sysconfig_path>
<sysconfig_key>DHCLIENT_SET_HOSTNAME</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>/etc/sysconfig/kernel</sysconfig_path>
<sysconfig_key>MODULES_LOADED_ON_BOOT</sysconfig_key>
<sysconfig_value>ip_conntrack_ftp</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>windowmanager</sysconfig_path>
<sysconfig_key>DEFAULT_WM</sysconfig_key>
<sysconfig_value>kde</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>displaymanager</sysconfig_path>
<sysconfig_key>DISPLAYMANAGER</sysconfig_key>
<sysconfig_value>kdm</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>displaymanager</sysconfig_path>
<sysconfig_key>DISPLAYMANAGER_KDM_THEME</sysconfig_key>
<sysconfig_value>KDE</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>syslog</sysconfig_path>
<sysconfig_key>SYSLOG_DAEMON</sysconfig_key>
<sysconfig_value>syslog-ng</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>postfix</sysconfig_path>
<sysconfig_key>POSTFIX_ADD_MESSAGE_SIZE_LIMIT</sysconfig_key>
<sysconfig_value>52428800</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_key>YAST_KEYBOARD</sysconfig_key>
<sysconfig_path>/etc/sysconfig/keyboard</sysconfig_path>
<sysconfig_value>de_DE</sysconfig_value>
</sysconfig_entry>
<sysconfig_entry>
<sysconfig_path>boot</sysconfig_path>
<sysconfig_key>RUN_PARALLEL</sysconfig_key>
<sysconfig_value>no</sysconfig_value>
</sysconfig_entry>
</sysconfig>
<users config:type="list">
<user>
<encrypted config:type="boolean">true</encrypted>
<user_password>xxxxxxxxxxxxx</user_password>
<username>root</username>
</user>
</users>
<x11>
<display_manager>kdm</display_manager>
</x11>
<bootloader>
<activate config:type="boolean">true</activate>
<linear config:type="boolean">false</linear>
<location>mbr</location>
</bootloader>
<general>
<mode>
<confirm config:type="boolean">false</confirm>
<halt config:type="boolean">false</halt>
<forceboot config:type="boolean">true</forceboot>
<reboot config:type="boolean">true</reboot>
<final_reboot config:type="boolean">true</final_reboot>
</mode>
</general>
<partitioning config:type="list">
<drive>
<device>/dev/sda</device>
<partitions config:type="list">
<partition>
<partition_nr config:type="integer">1</partition_nr>
<create config:type="boolean">false</create>
<format config:type="boolean">true</format>
<mount>/boot</mount>
</partition>
<partition>
<partition_nr config:type="integer">2</partition_nr>
<create config:type="boolean">false</create>
<format config:type="boolean">true</format>
<mount>swap</mount>
</partition>
<partition>
<partition_nr config:type="integer">3</partition_nr>
<create config:type="boolean">false</create>
<format config:type="boolean">true</format>
<mount>/</mount>
</partition>
<partition>
<partition_nr config:type="integer">4</partition_nr>
<create config:type="boolean">false</create>
<format config:type="boolean">false</format>
<mount>/private</mount>
</partition>
</partitions>
</drive>
</partitioning>
<report>
<errors>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</errors>
<messages>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">3</timeout>
</messages>
<warnings>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">3</timeout>
</warnings>
</report>
<add-on>
<add_on_products config:type="list">
<listentry>
<!--
<media_url>nfs://xxxxxxxxxxxxxxxxxxxxxxxxxxx/export/SuSE-release/12.1/DVD2</media_url>
<product_dir>/</product_dir>
<ask_on_error config:type="boolean">true</ask_on_error>
<name>DVD2 12.1 Non OSS</name> -->
</listentry>
</add_on_products>
</add-on>
<software>
<!-- if nothing is defined , kernel pae is choosed if suitable -->
<kernel></kernel>
<patterns config:type="list">
<pattern>base</pattern>
<pattern>32bit</pattern>
<pattern>base-32bit</pattern>
<pattern>enhanced_base-32bit</pattern>
<pattern>console</pattern>
<pattern>console-32bit</pattern>
<pattern>x11</pattern>
<pattern>x11-32bit</pattern>
<pattern>x11_opt</pattern>
<pattern>x11_opt-32bit</pattern>
<pattern>non_oss</pattern>
<pattern>yast2_basis</pattern>
<pattern>yast2_basis-32bit</pattern>
<pattern>yast2_install_wf</pattern>
<pattern>yast2_install_wf-32bit</pattern>
<pattern>fonts</pattern>
<pattern>fonts-32bit</pattern>
<pattern>fonts_opt</pattern>
<pattern>fonts_opt-32bit</pattern>
<pattern>kde</pattern>
<pattern>kde4</pattern>
<pattern>kde4_admin</pattern>
<pattern>kde4_basis</pattern>
<pattern>kde4_ide</pattern>
<pattern>kde4_imaging</pattern>
<pattern>kde4_internet</pattern>
<pattern>kde4_yast</pattern>
<pattern>kde4-32bit</pattern>
<pattern>kde4_admin-32bit</pattern>
<pattern>kde4_basis-32bit</pattern>
<pattern>kde4_ide-32bit</pattern>
<pattern>kde4_internet-32bit</pattern>
<pattern>kde4_yast-32bit</pattern>
<pattern>non_oss</pattern>
<pattern>non_oss-32bit</pattern>
<pattern>sw_management</pattern>
<pattern>sw_management_kde4</pattern>
<pattern>sw_management-32bit</pattern>
<pattern>sw_management_kde4-32bit</pattern>
</patterns>
<packages config:type="list">
<package>libEMF</package>
<package>ddskk</package>
<package>gjiten</package>
<package>xml-commons-apis</package>
<package>xml-commons-resolver</package>
<package>alsa-firmware</package>
<package>reiserfs</package>
<package>yast2-schema</package>
<package>autoyast2</package>
<package>yast2-slp</package>
<package>yast2-bootloader</package>
<package>yast2-online-update-configuration</package>
<package>yast2-firstboot</package>
<package>libqt4-qt3support</package>
<package>kexec-tools</package>
<package>bind-libs-32bit</package>
<package>libstdc++33-32bit</package>
<package>libsensors4-32bit</package>
<package>libqt4-qt3support-32bit</package>
</packages>
<remove-packages config:type="list">
<!-- This way, sysvinit-init will be installed and used. -->
<package>systemd-sysvinit</package>
<package>apper</package>
<package>libpackagekit-qt2-2</package>
<package>PackageKit-gstreamer-plugin</package>
<package>PackageKit-browser-plugin</package>
<package>PackageKit-branding-openSUSE</package>
<package>PackageKit</package>
<package>libpackagekit-glib2-14</package>
</remove-packages>
<!-- do after first reboot in stage 2 -->
<post-packages config:type="list">
</post-packages>
</software>
</profile>
| < Previous | Next > |