Mailinglist Archive: opensuse-autoinstall (56 mails)
| < Previous | Next > |
[opensuse-autoinstall] SLES10sp3 Autoyast Network configs being processed but lost later.
- From: Stephen Dowdy <sdowdy@xxxxxxxx>
- Date: Tue, 12 Jan 2010 19:48:50 -0700
- Message-id: <4B4D3492.9060802@xxxxxxxx>
in SLES 10sp3..
My autoyast profile network configuration is being processed, but
forgotten. It does not end up in the "installedSystem.xml", but is
clearly being considered in 'y2log' (with no apparent reason
for discarding it)
Network Interfaces section contains:
-------------------------------------------------------------
<interfaces config:type="list">
<interface>
<bootproto>static</bootproto>
<device>eth0</device>
<ipaddr>192.168.50.33</ipaddr>
<network>192.168.50.0</network>
<broadcast>192.168.50.255</broadcast>
<netmask>255.255.255.0</netmask>
<startmode>onboot</startmode>
<usercontrol>no</usercontrol>
</interface>
</interfaces>
-------------------------------------------------------------
Looks like, at least at SOME point along the way, AutoYast
is finding the interface, setting up configuration data
for a /etc/sysconfig/network/if file, but then later on
seems to completely forget to write the file, or it gets
removed. This worked in SLES9.
- Should the above autoyast profile configuration work?
- If so, what's going wrong?
- If not, am i relegated to creating post install scripts
to manually configure the sysconfig/network files and
udev rules?
thanks,
--stephen
y2log output (reformatted to be more readable)
-------------------------------------------------------------
in3(11181) [YCP] network/complex.ycp:65
Devs=$["eth":$["id-00:26:b9:39:18:21":$["BOOTPROTO":"static"
"BROADCAST":""
"ETHTOOL_OPTIONS":""
"IPADDR":"192.168.50.33"
"MTU":""
"NAME":"Broadcom NetXtreme II BCM5709 Gigabit Ethernet"
"NETMASK":"255.255.255.0"
"NETWORK":""
"REMOTE_IPADDR":""
"STARTMODE":"auto"
"UNIQUE":"rBUF.yy10jcgJwT2"
"USERCONTROL":"no"
"_aliases":$[]
"_nm_name":"bus-pci-0000:01:00.0"]]]
in3(11181) [YCP] NetworkDevices.ycp:609
<< exact same output as above >>
in3(12869) [YCP] Detection.ycp:235
IFCONFIG1: $["exit":0
"stderr":""
"stdout":"eth0 Link encap:Ethernet HWaddr 00:26:B9:39:18:21 \n
inet addr:192.168.50.33 Bcast:192.168.50.255 Mask:255.255.255.0\n
inet6 addr: fe80::226:b9ff:fe39:1821/64 Scope:Link\n UP BROADCAST
RUNNING MULTICAST MTU:1500 Metric:1\n RX packets:32410 errors:0
dropped:0 overruns:0 frame:0\n TX packets:1483 errors:0 dropped:0
overruns:0 carrier:0\n collisions:0 txqueuelen:1000 \n RX
bytes:5966883 (5.6 Mb) TX bytes:603226 (589.0 Kb)\n Interrupt:58
Memory:d6000000-d6012800 \n\nlo Link encap:Local Loopback \n
inet addr:127.0.0.1 Mask:255.0.0.0\n inet6 addr: ::1/128 Scope:Host\n
UP LOOPBACK RUNNING MTU:16436 Metric:1\n RX packets:22
errors:0 dropped:0 overruns:0 frame:0\n TX packets:22 errors:0
dropped:0 overruns:0 carrier:0\n collisions:0 txqueuelen:0 \n
RX bytes:1424 (1.3 Kb) TX bytes:1424 (1.3 Kb)\n\n"]
in3(12869) [YCP] Detection.ycp:242
IFCONFIG2: $["exit":0
<< exact same output as under IFCONFIG1 >>
in3(12869) [YCP] NetworkDevices.ycp:505 config=$["BOOTPROTO":"static"
"BROADCAST":""
"ETHTOOL_OPTIONS":""
"IPADDR":"192.168.50.33/24"
"MTU":""
"NAME":"Broadcom NetXtreme II BCM5709 Gigabit Ethernet"
"NETWORK":""
"REMOTE_IPADDR":""
"STARTMODE":"auto"
"UNIQUE":"rBUF.yy10jcgJwT2"
"USERCONTROL":"no"
"_nm_name":"bus-pci-0000:01:00.0"]
And Finally, last place i see it referenced:
[wfm] Y2CCWFM.cc(createInLevel):149 Parsing finished
[Interpreter] network/services/proxy.ycp:338 Calling YaST client lan_auto
(arguments: ["Export"])
[YCP] clients/lan_auto.ycp:14 ----------------------------------------
[YCP] clients/lan_auto.ycp:15 Lan autoinst client started
[YCP] clients/lan_auto.ycp:188 Adding: BOOTPROTO=static
[YCP] clients/lan_auto.ycp:188 Adding: BROADCAST=
[YCP] clients/lan_auto.ycp:188 Adding: ETHTOOL_OPTIONS=
[YCP] clients/lan_auto.ycp:188 Adding: IPADDR=192.168.50.33
[YCP] clients/lan_auto.ycp:188 Adding: MTU=
[YCP] clients/lan_auto.ycp:188 Adding: NAME=Broadcom NetXtreme II BCM5709
Gigabit Ethernet
[YCP] clients/lan_auto.ycp:188 Adding: NETMASK=255.255.255.0
[YCP] clients/lan_auto.ycp:188 Adding: NETWORK=
[YCP] clients/lan_auto.ycp:188 Adding: PREFIXLEN=24
[YCP] clients/lan_auto.ycp:188 Adding: REMOTE_IPADDR=
[YCP] clients/lan_auto.ycp:188 Adding: STARTMODE=auto
[YCP] clients/lan_auto.ycp:188 Adding: UNIQUE=rBUF.yy10jcgJwT2
[YCP] clients/lan_auto.ycp:188 Adding: USERCONTROL=no
[YCP] clients/lan_auto.ycp:188 Adding: _nm_name=bus-pci-0000:01:00.0
[YCP] clients/lan_auto.ycp:337 Lan auto finished
[YCP] clients/lan_auto.ycp:338 ----------------------------------------
[Interpreter] network/services/proxy.ycp:338 Called YaST client returned.
[wfm] Y2WFMComponent.cc(import):735 Y2WFMComponent::import (Ldap)
[wfm] Y2WFMComponent.cc(import):735 Y2WFMComponent::import (Autologin)
[wfm] Y2WFMComponent.cc(import):735 Y2WFMComponent::import (Nsswitch)
[wfm] Y2WFMComponent.cc(import):735 Y2WFMComponent::import (Pam)
[wfm] Y2WFMComponent.cc(import):735 Y2WFMComponent::import (LdapPopup)
[wfm] Y2CCWFM.cc(createInLevel):149 Parsing finished
[Interpreter] clients/ldap_auto.ycp:104 Calling YaST client ldap_auto
(arguments: ["GetModified"])
-------------------------------------------------------------
--
Stephen Dowdy - Systems Administrator - NCAR/RAL
303.497.2869 - sdowdy@xxxxxxxx - http://www.ral.ucar.edu/~sdowdy/
--
To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-autoinstall+help@xxxxxxxxxxxx
| < Previous | Next > |