Hi, I added the latest 3w-9xxx.ko modul that I compiled from the 3ware sources against the SLES10-SP1 installer kernel to a driverupdate, because I need support for the 3ware SAS controller. Now it happens that the AY installed loads the 3w-9xxx modul, but doesn't find a controller. Then later it removes it and loads it again and then finds the controller (I got this from the /var/log/boot.msg and the output on tty3. I specified "insmod=3w-9xxx" in the pxelinux.cfg because I want this controller to be recognized as first scsi device (for its raid to become sda). It seems that AY first loads the old modul from the initrd, then detects the other controllers, and after that reloads the 3ware module from the driverupdate. Is that the intended way? Do I have to put the module into the initrd to make it load before all others? cu, Frank -- Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049 * Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. * -- To unsubscribe, e-mail: opensuse-autoinstall+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-autoinstall+help@opensuse.org