Hey,
After an autoyast installation registration of the system (and hence
automaticupdates) fail.
blade5-eth0:~ # suse_register
No products to register
blade5-eth0:~ # ls /var/lib/zypp/db/products
blade5-eth0:~ #
We used our own installation source (copy from the DVDs) but we nerver
had these problem in a manual installation.
Any ideas? (Is there a default location for the autoyast-logfile? Does
someone want to have a look at it?)
Regards
Jan
--
Autoyast config file follows:
<?xml version="1.0"?>
<!DOCTYPE profile SYSTEM "/usr/share/autoinstall/dtd/profile.dtd">
<profile xmlns="http://www.suse.com/1.0/yast2ns"
xmlns:config="http://www.suse.com/1.0/configns">
<bootloader>
<activate config:type="boolean">true</activate>
<global>
true
0
<prompt>1</prompt>
/dev/sda1
<timeout config:type="integer">8</timeout>
</global>
<module>amd74xx</module>
<module>cciss</module>
<module>qla2xxx</module>
<module>processor</module>
<module>thermal</module>
<module>fan</module>
<module>reiserfs</module>
grub
<location>mbr</location>
false
<sections config:type="list">
<section>
<append>resume=/dev/sda2 splash=silent showopts</append>
<initial>1</initial>
<initrd>/boot/initrd</initrd>
<kernel>/boot/vmlinuz</kernel>
1
<name>SUSE Linux 10.1</name>
linux
<root>/dev/sda1</root>
<type>image</type>
</section>
<section>
<append>showopts ide=nodma apm=off acpi=off noresume nosmp
noapic maxcpus=0 edd=off 3</append>
<initrd>/boot/initrd</initrd>
<kernel>/boot/vmlinuz</kernel>
2
<name>Failsafe -- SUSE Linux 10.1</name>
failsafe
<root>/dev/sda1</root>
<type>image</type>
</section>
<section>
<append>resume=/dev/sda2 splash=silent showopts</append>
<initrd>/boot/initrd-xen</initrd>
<kernel>/boot/vmlinuz-xen</kernel>
3
<name>Xen -- </name>
Xen --
<root>/dev/sda1</root>
<type>image</type>
<xen>/boot/xen.gz</xen>
</section>
</sections>
</bootloader>
<general>
<mode>
<confirm config:type="boolean">false</confirm>
</mode>
<mouse>
<id>none</id>
</mouse>
<signature-handling/>
</general>
<groups config:type="list"/>
<networking>
AUTO
<dns>
true
true
<domain>site</domain>
<hostname>linux-uqg5</hostname>
<nameservers config:type="list">
<nameserver>192.168.16.254</nameserver>
<nameserver>212.117.68.10</nameserver>
<nameserver>212.117.64.86</nameserver>
</nameservers>
<searchlist config:type="list">
<search>mwrl.net</search>
</searchlist>
</dns>
<interfaces config:type="list">
<interface>
<bootproto>dhcp</bootproto>
<device>eth-id-00:14:c2:3d:2c:a2</device>
<name>Compaq NC7782 Gigabit Server Adapter (PCI-X,
10,100,1000-T)</name>
<netmask>255.255.255.0</netmask>
<startmode>auto</startmode>
<usercontrol>no</usercontrol>
</interface>
</interfaces>
<managed config:type="boolean">false</managed>
<modules config:type="list">
<device>bus-pci-0000:02:02.0</device>
<module>tg3</module>
<options></options>
</modules>
<routing>
false
</routing>
</networking>
<nfs config:type="list">
/home
defaults
guam:/home
/data
defaults
blade6:/mnt/san_v17
</nfs>
<nis>
false
false
false
research.lab
false
guam
false
true
</nis>
<autoget config:type="boolean">false</autoget>
true
<skipPre config:type="boolean">true</skipPre>
<day config:type="integer">0</day>
<hour config:type="integer">0</hour>
<minute config:type="integer">0</minute>
true
<timing>weekly</timing>
<partitioning config:type="list">
<drive>
<device>/dev/sda</device>
<partitions config:type="list">
<partition>
<filesystem config:type="symbol">reiser</filesystem>
<format config:type="boolean">true</format>
<mount>/</mount>
131
1
primary
<size>7304015872</size>
</partition>
<partition>
<filesystem config:type="symbol">swap</filesystem>
<format config:type="boolean">true</format>
<mount>swap</mount>
130
2
primary
<size>1077511168</size>
</partition>
</partitions>
<use>all</use>
</drive>
</partitioning>
<report>
<errors>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</errors>
<messages>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</messages>
<warnings>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</warnings>
<log config:type="boolean">true</log>
<show config:type="boolean">true</show>
<timeout config:type="integer">0</timeout>
</report>
<runlevel>
<default>3</default>
</runlevel>
<software>
<addons config:type="list">
<addon>X11</addon>
<addon>Min</addon>
</addons>
<base>Minimal+X11</base>
<packages config:type="list">
<package>yast2-trans-en_US</package>
(...)
<package>xen</package>
</packages>
</software>
<expire></expire>
<group>100</group>
<groups>video,dialout</groups>
<home>/home</home>
<inactive>-1</inactive>
<shell>/bin/bash</shell>
<skel>/etc/skel</skel>
<users config:type="list">
<user>
<encrypted config:type="boolean">false</encrypted>
(..)
<username>root</username>
</user>
</users>
</profile>
--
Jan Steinkuehler
Ericsson Research
Ericsson GmbH, Eurolab
EDD/XR/N
Ericsson Allee 1
D-52134 Herzogenrath
jan.steinkuehler@ericsson.com
