Mailinglist Archive: opensuse-autoinstall (101 mails)

["mailing list" <fzmailinglist@xxxxxxxxxxxxxx>]

hi,

i have a problem with a few workstations over here. The workstations have
Nvidia Quadro FX 540 graphix cards, and Dell 1905FP LCD Displays. I setup
everything in my autoyast installation. Here is how:

    <color_depth config:type="integer">16</color_depth>
    <configure_x11 config:type="boolean">true</configure_x11>
    <display_manager>kdm</display_manager>
    <enable_3d config:type="boolean">true</enable_3d>
    <monitor>
      <display>
        <frequency config:type="integer">60</frequency>
        <height config:type="integer">1024</height>
        <max_hsync config:type="integer">82</max_hsync>
        <max_vsync config:type="integer">62</max_vsync>
        <min_hsync config:type="integer">31</min_hsync>
        <min_vsync config:type="integer">58</min_vsync>
        <width config:type="integer">1280</width>
      </display>
      <monitor_device>1280X1024@60HZ</monitor_device>
       <monitor_vendor>--&gt; LCD</monitor_vendor>
     </monitor>
    <resolution>1280x1024</resolution>
    <window_manager>kde</window_manager>
  </x11>

If i use a Analog Cable VGA Cable everything works ok. The workstation comes
up with 1280x1024, but if i use a Digital DVI Cable, it comes up with
1024x768. I can do what i want it doesnt work. Any suggestions or tips?

mfg

Florian Zuegner
Junior Network Assistance
Honda Research Institute Europe GmbH