Mailinglist Archive: opensuse-autoinstall (101 mails)

["Hans-Joachim Ehlers" <HansJoachim.Ehlers@xxxxxxxxxxxx>]

With an IBM graphic card we had an similar issue that with  DVI the
maximum resolution was lower then as with analog (VGA) So you might
check the handbook fom your Graphic card to insure that it really able
to to use certain resolution using the DVI.

hth
Hajo

>>> "mailing list" <fzmailinglist@xxxxxxxxxxxxxx> 13/03/2006 09:36 >>>
hi,

i have a problem with a few workstations over here. The workstations
have
Nvidia Quadro FX 540 graphix cards, and Dell 1905FP LCD Displays. I
setup
everything in my autoyast installation. Here is how:

    <color_depth config:type="integer">16</color_depth>
    <configure_x11 config:type="boolean">true</configure_x11>
    <display_manager>kdm</display_manager>
    <enable_3d config:type="boolean">true</enable_3d>
    <monitor>
      <display>
        <frequency config:type="integer">60</frequency>
        <height config:type="integer">1024</height>
        <max_hsync config:type="integer">82</max_hsync>
        <max_vsync config:type="integer">62</max_vsync>
        <min_hsync config:type="integer">31</min_hsync>
        <min_vsync config:type="integer">58</min_vsync>
        <width config:type="integer">1280</width>
      </display>
      <monitor_device>1280X1024@60HZ</monitor_device>
       <monitor_vendor>--&gt; LCD</monitor_vendor>
     </monitor>
    <resolution>1280x1024</resolution>
    <window_manager>kde</window_manager>
  </x11>

If i use a Analog Cable VGA Cable everything works ok. The workstation
comes
up with 1280x1024, but if i use a Digital DVI Cable, it comes up with
1024x768. I can do what i want it doesnt work. Any suggestions or
tips?

mfg

Florian Zuegner
Junior Network Assistance
Honda Research Institute Europe GmbH