Hi I have an Intel system with 4 SCSI adapters. The internal adapters are aic7902 adapaters driven by the aic79xx module. The external adapters are aic7899 adapters driven by the aic7xxx module My install is performed when only 2 disks are present on scsi 1. There are no disks on scsi 0 or scsi2 or scsi3. The install configures /etc/sysconfig/kernel as follows: INITRD_MODULES="aic79xx aic7xxx aic79xx reiserfs" and the first disk on scsi 1 is assigned sda1 nad has the root partition installed onto it. However, if I run YaST through any of the options which reconfigure initrd this variable is reset to: INITRD_MODULES="aic7xxx aic79xx reiserfs" This means that if I now attach an external disk array to scsi2 or scsi3 these disks will be located first because aic7xxx is loaded first. Disks in the disk array are assigned to sda1 and so on, rahther than the internal disk. The upshot is that the attempt to mount / on /dev/sda1 now fails and the system startup halts. Have I setup my install configuration wrongly? Or is this a bug in YaST mkinitrd scripts? Any help or advice would be much appreciated.