Steve,
hmm, i already have these options included (see below), that's why I'm
wondering
<general>
...
<mode>
<confirm config:type="boolean">false</confirm>
<forceboot config:type="boolean">false</forceboot>
false
<reboot config:type="boolean">false</reboot>
</mode>
...
</general>
in addition if I reinstall a previously installed system (which already has
some raid devices, e.g. /dev/md0) autoyast complains
that it can't create those raid devices because the autoyast installation
process already detected the old raid device (of the old installation)
and brings it up, thus it bugs me that it can't create a new one (with same
name).
A manual workaround for me is to switch to the second console (ALT+F2) and
do the following
1) erase partition table manually (since putting it in a
pre-installation-script doesn't helped either).
$ dd if=/dev/zero bs=512 count=1 of=/dev/sda
$ dd if=/dev/zero bs=512 count=1 of=/dev/sdb
2) reboot & restart autoyast installation
Mit freundlichen Grüssen/best regards
Jochen Kirn