From that boot prompt, I can type "help" but if there is a command
Decided to take another look at trying to boot TW RPi 1 images on a RPi zero, hooked up to a monitor to see stdout. Have tried the following TW LXQT and JeOS images, the LXQT is the latest build and the JeOS is one release older. openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.armv6l-2016.09.27-Build1.8.raw.xz openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.armv6l-2016.06.12-Build2.10.raw.xz Both have same results. The boot process proceeds until unable to find a "config.txt" file. Knowing the file should actually have a capital "C" I renamed the file to "Config.txt" But with no different result. The following is a link to a photo image of stdout when boot stops, is the same for both images https://goo.gl/photos/uV2FyFdwv2SkQToT8 that might continue while also referencing or injecting the Config.txt file, I don't know what that might be. I've waited over an hour each time in case the boot might just have taken longer than expected, but there's no difference. The display is the same (as the photo). Each time, when the boot has failed, I've inserted the card back in a big machine, and I can see that the boot process has at least created 3 partitions, EFI, boot and root. I didn't try to mount the card or partitions to inspect the contents of the partitions. Anything else to try? TIA, Tony -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org