Hello all! I have a Nexbox z68 android TV box with a RK3368 processor that I want to play with. This box is like the GeekBox but cheaper (I bought mine for 30€). And, of course, also with less connectors, but it’s really cheap for a 2GB RAM / 16GB eMMC box. The hardware of the two box are pretty close, I’ve been able to boot the Ubuntu GeekBox version without any problem. One of missing function is the serial console by default (like a lot of TV box) but I’ve been able to use it with some minor work. If you want to try, give a look at my post on FreakTab (I tried to add the link but it seems that it's not allowed by the forum rules, my message was denied). Now, I want to try openSUSE on it. I saw that Andreas has a WIP on GeekBox (https://en.opensuse.org/HCL:GeekBox) and, as I understand, it’s possible to boot openSUSE with both the vendor U-Boot or the mainline U-Boot. For the moment, I want to stay with the vendor version because at this time I don’t known how to enter MaskRom mode (there is two test points near the eMMC chip, I just need to test it). Here my question (finally!): what openSUSE image do I use? And where to find the initrd? I found a kernel in the generic JeOS image but no initrd... Regards, Loic N�����r��y隊Z)z{.�櫛맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.�櫛�0�����Ǩ�