On Mittwoch, 7. September 2016 21:37:02 CEST Freek de Kruijf wrote:
Op woensdag 7 september 2016 14:03:38 schreef Roger Oberholtzer:> I get no activity on the device. No DHCP request. No activity on any
of the 4 USB ports (where there should be a console login?).
openSUSE-Tumbleweed-ARM-JeOS-raspberrypi3.armv7l-2016.08.20-Build1.4.raw.x z
I tried that one too. Only got a colored screen. From the list I learned that soon there will be one that works. I had a older one from June, which works and I updated that one with "zypper up" and it still works.
The armv7 RPi2 and RPi3 images are almost identical, AFAIK the only difference is the bcm2709 vs bcm2710 Device Tree Blob (DTB). Most importantly, the 32bit arm RPi{1,2,4} images use a separate ext3 boot partition, and thus should not be affected by any ext4 changes.
openSUSE-Tumbleweed-ARM-JeOS-raspberrypi3_aarch64.aarch64-2016.09.06-Build 6 .1.raw.xz
I don't think that one will ever work on a RPi3.
Aside from the ext4 problems, the JeOS RPi3 aarch64 image works, tested myself. You can either (after writing the image to the SD) modify the ext4 partition to disable the 64bit feature, or use an image with a patched U-Boot which supports the 64bit feature. Kind regards, Stefan -- Stefan Brüns / Bergstraße 21 / 52062 Aachen home: +49 241 53809034 mobile: +49 151 50412019 work: +49 2405 49936-424 -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org