Finished testing the newest image
openSUSE-Tumbleweed-ARM-JeOS-raspberrypi.armv6l-1.12.1-Build377.2.raw.xz
from
http://download.opensuse.org/ports/armv6hl/tumbleweed/images/
for Raspberry Pi 1B
This image is much smaller than its predecessor: 160 MiB versus 230 MiB.
I test it with a HDMI device connected, so I can see the messages.
First it shows the u-boot messages, shows for a short while Tux and shows a
black screen for quite a while. Apparently during this time the SD card is
changed to have a swap partition at the end and the ROOT partition is enlarged
to cover the remaining space on the SD card.
After that it shows a number of messages typical ones one see during boot.
There is an an error message about being not able to mount /boot/efi
The system ends in an emergency state.
After power down and up it does not boot anymore but it looks the system is
trying to boot via the network.
One of the last messages is that one should run "journalct -xb" to see what
went wrong. I mounted the SD card, or rather the ROOT partition, on my desktop
and started the command "journalctl -D