30.03.2015 19:20, Wojciech Kazubski пишет:
I am trying to install openSUSE 13.2 on Beagleboard xM rev. B. If I am correct, I should use the image labelled "beagle" for this board.
So far I managed to get JeOS version working, I can connect using serial console or SSH protocol (after configuring the network).
With E17 an XFCE versions I get the last last message "Starting kernel" on serial port but no console output. The screen goes plain yellow soon after reset and then black and message "No input signal" appears. It seems that keyboard is working, as I can toggle keyboard LEDs wih "Caps Lock" and "Scroll Lock" keys, but I can't do anything more.
I suspect that there is some problems with configuring video hardware, missing/bad kernel module or so.
Should JeoS version of openSUSE for ARM produce output to the local console? Hi,
From what I see from sources, It should not.
# define KERNEL_CMDLINE_SER "plymouth.enable=0 console=ttyO2 vram=16M" # define KERNEL_CMDLINE_GFX "plymouth.enable=0 vram=16M"
Both versions do not have anything appearing on the monitor. So I have two options, the first one is to try to get video output on JeOS, the other is to manually modify E17/XFCE files on SD card to get board working without firstboot configuration. At least network configuration and root account is needed. The first option requires the kernel to have proper modules. is the kernel the same in both JeOS and graphical versions? Is it possible to get a list of packages included in the image? -- Wojciech Kazubski Instytut Radioelektroniki Politechniki Warszawskiej -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org