I am trying to install openSUSE 13.2 on a cubieboard1 that I bought about 2 years ago. It has an A10 and the PCB is labelled 2012-09-09. Out of the box it boots flawlessly into the Android 4.0.4, kernel 3.0.8 Nov 2012, stored on its nand flash ex factory. See its serial output below. Putting this http://download.opensuse.org/ports/armv7hl/distribution/13.2/appliances/open... on a uSD card (32G Adata, 16G Lexar 600x - same result) and powering up the board gives a black screen and no keyboard or mouse activity. The serial terminal (once opened, somehow) only shows: U-Boot SPL 2014.10 (Nov 30 2014 - 00:17:30) DRAM: 1024 MiB CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2 ### ERROR ### Please RESET the board ### Anything I can do/test here? Thanks, Volker Booting the android in nand flash: HELLO! BOOT0 is starting! boot0 version : 1.5.1 dram size =1024 Succeed in opening nand flash. Succeed in reading Boot1 file head. The size of Boot1 is 0x0003c000. The file stored in 0X00000000 of block 2 is perfect. Check is correct. Ready to disable icache. Succeed in loading Boot1. Jump to Boot1. [ 0.133] boot1 version : 1.4.0 [ 0.133] pmu type = 3 [ 0.134] bat vol = 0 [ 0.161] axi:ahb:apb=3:2:2 [ 0.161] set dcdc2=1400, clock=1008 successed [ 0.163] key [ 0.175] no key found [ 0.175] flash init start [ 0.226] flash init finish [ 0.227] fs init ok [ 0.228] fattype FAT16 [ 0.229] fs mount ok [ 0.236] script finish [ 0.237] power finish [ 0.244] BootMain start [ 0.244] 0 [ 0.264] key value = 0 [ 0.264] recovery key high 6, low 4 [ 0.265] unable to find fastboot_key key_max value [ 0.273] test for multi os boot with display [ 0.274] show pic finish [ 0.277] load kernel start [ 0.301] load kernel successed [ 0.301] start address = 0x4a00000 U-Boot 2011.09-rc1 (Nov 26 2012 - 14:01:52) Allwinner Technology CPU: SUNXI Family Board: A10-EVB DRAM: 512 MiB NAND: 3776 MiB In: serial Out: serial Err: serial --------fastboot partitions-------- -total partitions:11- -name- -start- -size- bootloader : 1000000 1000000 env : 2000000 1000000 boot : 3000000 2000000 system : 5000000 14000000 data : 19000000 20000000 misc : 39000000 1000000 recovery : 3a000000 2000000 cache : 3c000000 8000000 private : 44000000 1000000 sysrecovery : 45000000 14000000 UDISK : 59000000 93000000 ----------------------------------- Hit any key to stop autoboot: 0 NAND read: device 0 offset 0x3000000, size 0x2000000 33554432 bytes read: OK Starting kernel ... [ 0.181151] cryptomgr_test used greatest stack depth: 6672 bytes left [ 0.181535] cryptomgr_test used greatest stack depth: 6480 bytes left [ 0.183443] cryptomgr_test used greatest stack depth: 6388 bytes left [ 0.184385] cryptomgr_test used greatest stack depth: 6280 bytes left [ 0.217351] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1 [ 0.790418] [LCD] lcd_module_init [ 0.857446] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on [ 0.865489] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on [ 0.873517] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on [ 0.881461] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on [ 0.889376] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on [ 0.897360] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on [ 0.905093] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock [ 0.966821] init: to sleep 1 seconds. [ 1.970789] init: has waken up. [ 1.973981] init: [william] hdmistatus = 1! [ 1.978578] init: width = 1280 [ 1.981696] init: height = 720 [ 1.984756] init: s.st_size = 3686400 [ 2.155357] init: do_umount: /data [ 2.279486] e2fsck used greatest stack depth: 5696 bytes left [ 2.413573] init: do_umount: /cache [ 2.452029] init: dont need format /dev/block/nandk [ 2.458235] init: dont need format /dev/block/nandi [ 2.519475] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. [ 2.533583] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' [ 3.550659] android_usb: already disabled [ 5.110541] init: untracked pid 99 exited [ 5.114581] init: untracked pid 101 exited [ 5.118703] init: untracked pid 103 exited [ 11.876030] sunxi-rtc sunxi-rtc: rtc only supports 63��2010��2073�� years [ 12.145692] BatteryStats-Wr used greatest stack depth: 5648 bytes left [ 16.606513] wemac wemac.0: WARNING: no IRQ resource flags set. [ 18.727648] netd used greatest stack depth: 5416 bytes left -- Volker Kuhlmann http://volker.top.geek.nz/ Please do not CC list postings to me. -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org