On 11/23/2012 05:28 PM, Alexander Graf wrote:
On 09.11.2012, at 10:42, Peter Czanik wrote:
On 11/05/2012 02:50 PM, Alexander Graf wrote:
On 05.11.2012, at 13:55, Peter Czanik
wrote: Hello,
On 10/31/2012 08:38 AM, Peter Czanik wrote:
Hello,
On 10/30/2012 11:37 PM, Alexander Graf wrote:
> I don't know, where your uImage.old comes from :) Trying to do it by hand using the original files from 12.2 RC2 it seems to be as with all my previous attempts: Yeah, I tried the original files too. As soon as I pass console=ttymxc0,115200 there it boots just fine. Gotta love heisenbugs.
Could you please try the latest image:
http://download.opensuse.org/ports/armv7hl/distribution/12.2-untested/applia...
I'm currently not able to test if it actually does work, but according to my observations it should. Please let me know if it does work for you! If not, please post the result of "printenv" on your machine.
Alex
Tested an even later image, as the one you sent is no more available. No luck: Did you have a chance to look at it? Everything else seems to work fine with this boot environment, except openSUSE 12.2 / factory images... Sorry. I'm at LinuxCon without any Efika MX devices around.
If you (or someone else) could find out what exactly is going wrong, I'd be more than happy to implement whatever changes are needed, but I can't debug or test any efika images now ;). As the machine and the u-boot should be the same. Could you or anybody else with a serial board share the output of "printenv" with me? As most likely it's the only difference... I remember we talked about this on IRC. Did you manage to boot your machine eventually? :) No :( At least not with openSUSE, anything else I tried boots fine on it. And the printenv you sent is exactly the same, as I have. So I have no idea... Bye, CzP -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org