Hi,
For beagleboard, it is provided by x-loader-omap3beagle, not u-boot. Maybe the problem is here?
Hmm, also my beagle test build worked. When I compared your log with mine it's different here: Copying boot image to disk EXEC [blkid /dev/mapper/loop0p1 2>&1] EXEC [blkid -o value -s TYPE /dev/mapper/loop0p1] EXEC [mount /dev/mapper/loop0p1 /tmp/kiwiloop.GcVSTY 2>&1] EXEC [cp -dR /tmp/kiwiboot.IXTKqd/boot /tmp/kiwiloop.GcVSTY 2>&1] EXEC [mv /tmp/kiwiloop.GcVSTY/boot/boot.scr /tmp/kiwiloop.GcVSTY] EXEC [mv /tmp/kiwiloop.GcVSTY/boot/u-boot.bin /tmp/kiwiloop.GcVSTY] EXEC [mv /tmp/kiwiloop.GcVSTY/boot/MLO /tmp/kiwiloop.GcVSTY] In your log only the boot.scr is found but no u-boot.bin and no MLO which means they are not part of the generated initrd. To me it looks like you did not boot include those packages. The following is from the kiwi-templates arm JeOS example: <packages type="bootstrap" profiles="beagleFlavour"> <package name="kernel-omap2plus" bootinclude="true"/> <package name="u-boot-omap3beagle" bootinclude="true"/> <package name="x-loader-omap3beagle" bootinclude="true"/> </packages> The bootinclude make sure they are installed when kiwi builds the initrd too. In your log they are installed only into the system image Regards, Marcus -- Public Key available gpg --keyserver gpg-keyserver.de --recv-keys 0xCCE3C6A2 ------------------------------------------------------- Marcus Schäfer (Res. & Dev.) SUSE LINUX Products GmbH Tel: 0911-740 53 0 Maxfeldstrasse 5 FAX: 0911-740 53 479 D-90409 Nürnberg GF: Jeff Hawn,Jennifer Guild, Felix Imendörffer HRB: 21284 (AG Nürnberg) Germany http://www.suse.de ------------------------------------------------------- -- To unsubscribe, e-mail: opensuse-arm+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-arm+owner@opensuse.org